Update compatible-controllers.md

docs/basics/compatible-controllers.md

@@ -52,6 +52,7 @@ In the following some third-party controllers are listed. Please use a decent an
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [cod.m WLED Controller](https://shop.codm.de/en/automation/wled/30/wled-controller-wlan/wi-fi) | WLED Controller for 5V/12V/24V strips based in ESP32, complete in case, with plug, including level shifter with 2/4 outputs. Commercially available in Germany throughout Europe. Detailed wiring schemes and documentation.
 [Domestic Automation LLC](https://www.domestic-automation.com) | Plug in design makes it the easiest and quickest preinstalled WLED controller to setup! Modular design allows for simple plug-in addition of Motion sensors, Button control, 12V lights and more. Snap track makes for universal mounting. Includes built in fuses and power relay for safety and control. Available on Amazon [here](https://amzn.to/3XFTjpb)
 [E8-WiFi Plus](https://computerstyretjulelys.dk/vare/e8-wifi-plus-pixel-controller/) | The E8-WiFi Plus is an advanced 8-port WLED pixel controller built on the robust ESP32 microcontroller, designed for maximum performance and flexibility. It comes fully pre-assembled, supporting a wide voltage range from 5V to 24V DC. With a high output current capacity of up to 30A across all 8 outputs, each is fused by a 5A auto fuse. Features include an external antenna for improved WiFi coverage, dual power input for reliability, spring terminals for easy connections, and a micro-SD card slot for standalone operations. An IR receiver is also included, along with extra connectivity options like access to extra GPIOs and the I2C bus. The controller is also compatible with Xlights, to be used in light shows.
+[Esp32-Stick-WLED](https://www.tindie.com/products/allexok/esp32-stick-wled-powering-smart-leds-using-poe/) | PoE-powered ESP32 Ethernet board with 2 smart LEDs and 1 RGB channel, featuring Phoenix connectors. The board includes integrated level shifters and an external antenna connector. A 5V 2.5A output is available, and 3D-printable enclosure files are provided. The boards are shipped with WLED pre-flashed.
 [ESP8266 Pixel Controller](https://www.maltepoeggel.de/?site=pixelcontroller) | DIY board for 5V/12V LED strips with TTL or RS485 output using a Wemos D1 mini, integrated fuse, pluggable terminal block, 3D printed module case
 [ESPthings.io ET-AL01](https://www.espthings.io/AL01) | DIY board for 5 Analog channels and/or up to 5 Digital LED channels (or a combination of the latter as required), Integrated level shifter, 5v/12/24v compatibility, 4x pull-up/down GPIO, serial interface and power distribution terminals. Can be used with Wemos D1-style ESP8266 or ESP32 boards.
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [ESP32 WLED Pico Board](https://www.tindie.com/products/28276/) | ESP32 WLED pico board,super small form factor, ready to buy on [Tindie](https://www.tindie.com/products/28276/) and [Tindie EU](https://www.tindie.com/products/moonmodules/esp32-pico-board-with-digital-microphone/). Integrated level shifter, exposed pins for extending functionality , on board I2S microphone, [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest). Project page is [here](https://github.com/srg74/WLED-ESP32-pico)