add contents from MB-600

add contents from MB-600

Allfiles/CleanupOldModules.ps1

@@ -0,0 +1,6 @@
+Uninstall-Module -name Microsoft.PowerApps.Administration.PowerShell -AllVersions
+uninstall-module -name Microsoft.PowerApps.PowerShell -AllVersions
+uninstall-module -name Microsoft.Xrm.OnlineManagementAPI -AllVersions
+uninstall-module -name Microsoft.Xrm.Data.Powershell -AllVersions
+uninstall-module -name MSOnline -AllVersions
+uninstall-module -name AzureAD -AllVersions

Allfiles/Power Platform Trial Setup.md

@@ -0,0 +1,359 @@
+Copyright ©
+
+**Content**
+
+[Introduction to the Labs 3](#introduction-to-the-labs)
+
+[Objectives 3](#objectives)
+
+[Purpose 3](#purpose)
+
+[Preparation 3](#preparation)
+
+[Resources 3](#resources)
+
+[Implications of using a cloud service
+3](#implications-of-using-a-cloud-service)
+
+[Location of files 3](#location-of-files)
+
+[Credentials 3](#credentials)
+
+[Profiles or InPrivate/Incognito Mode 3](#profiles-or-inprivateincognito-mode)
+
+[Trial Setup 5](#trial-setup)
+
+[Trial tenant 5](#trial-tenant)
+
+[Objectives 5](#objectives-1)
+
+[Steps 5](#steps)
+
+[Lab Setup 8](#lab-setup)
+
+[Objectives 8](#objectives-2)
+
+[Steps 8](#steps-1)
+
+ Introduction to the Labs
+=========================
+
+Objectives
+----------
+
+### Purpose
+
+The purpose of the hands-on labs is to reinforce learning.
+
+### Preparation
+
+To execute the labs, you need access to a Power Platform environment where you
+have access to create apps.
+
+### Resources
+
+The labs utilise a Microsoft 365 tenant with:
+
+**Power Apps**: A Software-as-a-Service (SaaS) application platform that enables
+power users in line of business roles to easily build and deploy custom business
+apps.
+
+**Microsoft Dataverse**: Make it easier to bring your data together and quickly
+create powerful apps using a compliant and scalable data service and app
+platform that integrates into Power Apps.
+
+### Implications of using a cloud service
+
+The user interface and functionality in Microsoft 365 and Power Platform are
+subject to change without notice so the steps listed may not be correct.
+
+### Location of files
+
+Files are in GitHub
+<https://github.com/MicrosoftLearning/MB-600-Dynamics-365-Power-Platform-Solution-Architect/tree/master/Allfiles>
+
+### Credentials
+
+**IMPORTANT** Do not use your own company credentials or company name when
+creating a trial. We recommend using a Gmail or Outlook address rather than your
+work email address to prevent your trial being associated with your company.
+
+### Profiles or InPrivate/Incognito Mode
+
+One of the issues faced with trials is credential “leakage” where you suddenly
+find yourself in your own company’s Microsoft 365 live tenant and environment.
+
+You have two options:
+
+1.  Use InPrivate (Edge) or Incognito (Chrome)
+
+2.  Create a Profile (Edge) or add a Person (Chrome)
+
+Note: InPrivate/Incognito does not store session cookies, and this can cause
+authentication issues with constant login prompts.
+
+How to create a person <https://support.google.com/chrome/answer/2364824>
+
+How to create a profile
+<https://www.onmsft.com/how-to/how-to-use-profiles-a-new-feature-in-microsoft-edge-insider>
+or
+<https://www.tenforums.com/tutorials/144642-how-add-profile-microsoft-edge-chromium.html#option1>
+
+Trial Setup
+===========
+
+Trial tenant
+------------
+
+### Objectives
+
+Create a Power Apps trial.
+
+### Steps
+
+#### Sign up for a trial
+
+In a browser profile session, navigate to
+[https://signup.microsoft.com/Signup?OfferId=83D3609A-14C1-4FC2-A18E-0F5CA7047E46](https://signup.microsoft.com/Signup?OfferId=83D3609A-14C1-4FC2-A18E-0F5CA7047E46,B07A1127-DE83-4a6d-9F85-2C104BDAE8B4)
+
+![](media/fdfc45f38beb293323826d9f71469bb8.png)
+
+For this screen, use a valid email address (**not your business email address**)
+where you can receive credentials and password resets, and a valid mobile phone
+number. If you are already using Microsoft 365 then use another email address
+e.g., outlook.com or gmail.com.
+
+Click **Next** and then **Setup account**.
+
+![](media/55a61e2a445ed42dee9d649931ae7331.png)
+
+Fill out the form above.
+
+For Company Name, use **Power Platform Training**.
+
+For Your organisation size, select **1 person.**
+
+Note: We recommend using United States for country and English as language as
+this makes following the labs easier.
+
+Click **Next**.
+
+Select the **Text me** radio button, enter your mobile number and click **Send
+Verification Code**.
+
+Enter the unique verification code you received and click **Next**.
+
+![](media/27fcac8d54687c2a084b136561d9a9fa.png)
+
+Fill out the form above.
+
+For the organisation name, enter a unique name to reflect this training e.g.,
+your initials + year/month.
+
+Click **Check availability**.
+
+Click **Next**.
+
+![](media/5e02064556929e64d58475a64b94344c.png)
+
+Fill out the form above.
+
+Click **Sign up**.
+
+After a short while the following page will appear.
+
+![](media/473ee6e6dcb9746a31ac25d321c7a2e7.png)
+
+Write the user ID down.
+
+Click **Get Started**
+
+#### Configure Microsoft 365
+
+This will transfer control to the Microsoft 365 environment. You need to access
+the Microsoft 365 Admin Centre <https://admin.microsoft.com/AdminPortal/Home>.
+
+![](media/abf5b23e0c71c6df6845761b9312c189.png)
+
+Click **Users** and then **Active Users** in the left hand navigation
+
+Verify that your users has all licenses assigned
+
+![](media/184c5570f0c0282696b6609f039f330e.png)
+
+**Close** the pane.
+
+Lab Setup
+---------
+
+### Objectives
+
+Create users and environments for all students.
+
+### Steps
+
+#### PowerShell Script
+
+In Windows, open Windows PowerShell. Make sure you open PowerShell as an
+administrator. See
+<https://docs.microsoft.com/powershell/scripting/learn/ps101/01-getting-started#how-do-i-launch-powershell>
+for how to start PowerShell.
+
+Note: You can use the PowerShell command line or the PowerShell ISE.
+
+Change Directory to where the **Setup.ps1** and
+**ContosoDeviceOrderManagement_1_0_0_1.zip** files are located.
+
+![](media/70e0595271ac3554f3bc27858addab7f.png)
+
+Run the following commands:
+
+>   **Set-ExecutionPolicy RemoteSigned**
+
+>   **Set-PSRepository -Name PSGallery -InstallationPolicy Trusted**
+
+![](media/bce6e94b9d5cd055cdeb1f7e302dfe56.png)
+
+If prompted answer with **A [Yes to All]**
+
+Run **Setup.ps1**
+
+![](media/32ab8fc998a851725edd72016eecb353.png)
+
+If prompted answer with **A [Yes to All]**
+
+![](media/77e4c772c6fc866527ad10371a5ff562.png)
+
+Run the following command:
+
+**Start-MB600-Setup -TenantName \<Tenant name\> -CDSLocation \<Region\>
+-UserCount \<Number of Students\>**
+
+Your Tenant name is the name you entered for Step 3 when creating the trial. You
+should enter only the first part of the Tenant name i.e., without
+onmicrosoft.com.
+
+The region should be the region of your tenant and will be from the country you
+selected in Step 2. You can find your region by running the commands:
+
+>   **Connect-MsolService**
+
+>   **Get-MsolCompanyInformation**
+
+And checking the country code. Valid values for Region are:
+
+-   unitedstates
+
+-   southamerica
+
+-   canada
+
+-   europe
+
+-   asia
+
+-   australia
+
+-   japan
+
+-   india
+
+-   unitedkingdom
+
+-   France
+
+The script creates environments and databases for each student and a development
+environment with the solution imported.
+
+#### Check Dataverse Environments
+
+Navigate to the Power Platform Admin Center <https://aka.ms/ppac>
+
+Verify that there are environments for each student.
+
+![](media/cc5e11aa22ad8038ba3522845aeedbfb.png)
+
+#### Check Development Environment
+
+Navigate to the Maker Portal <https://make.powerapps.com/>
+
+Select the **Device Ordering Development** environment.
+
+![](media/7b7569dce81f2b7ab45c5b7d9c158766.png)
+
+If you do not see the environment, press Ctrl-F5 to refresh your browser.
+
+Click on **Solutions** and verify the **Contoso Device Order Management**
+solution has been imported.
+
+![](media/624ba9442314f4f11de35f82120109fc.png)
+
+Click on **Apps** and verify the **Device Ordering App** and the **Device
+Procurement** apps have been imported.
+
+![](media/1c45791c423ef077bddd11a244b28f19.png)
+
+#### Add users to the Development environment
+
+Navigate to the Power Platform Admin Center <https://aka.ms/ppac>
+
+Select the **Device Ordering Development** environment.
+
+Click on **Settings**.
+
+Expand **Users + permissions**.
+
+Select **Users**.
+
+![](media/eef7fa328ac9721f233f96249b271254.png)
+
+If the Lab Admin users for each of the students are listed, skip to the next
+step, Assign security roles.
+
+Click on **+ Add user**.
+
+![](media/ac232956313bc97046afd60d7496728d.png)
+
+Enter **labadmin**
+
+![](media/1f21a53415d63490790be37b13d5de3e.png)
+
+Select a Lab Admin user and click **Add**.
+
+Click **Not Now**.
+
+Repeat for all the Lab Admin users.
+
+![](media/581c16e0a0b20a369cc5b86ef51f23a5.png)
+
+#### Assign security roles
+
+Navigate to the Power Platform Admin Center <https://aka.ms/ppac>
+
+Select the **Device Ordering Development** environment.
+
+Click on **Settings**.
+
+Expand **Users + permissions**.
+
+Select **Security Roles**.
+
+Select the **System Customizer** role.
+
+![](media/063598178fbd5b1e3d1928b2f544a630.png)
+
+Click **+ Add people**.
+
+![](media/5ac93c0242eab8c2a00920127e0835c6.png)
+
+Enter **labadmin**
+
+Select a Lab Admin user.
+
+Repeat and select all Lab Admin users.
+
+![](media/b31ed96b430c65786ebc633d7c7e866b.png)
+
+Click on **Add**.
+
+You are now ready to run the ALM lab.