Update build-padavan.yml

.github/workflows/build-padavan.yml

@@ -1,102 +1,64 @@
-#修改TNAME: K2P 中的K2P为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同
-name: Build Padavan
+#修改TNAME: K2P中的K2P为你需要编译的型号，注意名称要与configs/templates/目录下的名称相同
+名称：建造帕达文
 
 on: 
   release:
-    types: [published]
+    types: [    类型：[已发布]]
   push:
     tags:
     - 'v*'
-  #  branches: 
-  #    - master
+  # 分支机构：#  branches: 
+  ＃ - 掌握#    - master
 #  schedule:
 #    - cron: 0 8 * * 5
   watch:
-    types: [started]
+    types: [    类型：[开始]]
 
 jobs:
   build:
-    runs-on: ubuntu-18.04
-    if: github.event.repository.owner.id == github.event.sender.id
+    runs-on:     运行系统：ubuntu-20.04
+    if:     如果： github.event.repository.owner.id == github.event.sender.id
 
     steps:
-    - name: Checkout
-      uses: actions/checkout@master
-    - name: Initialization environment
+    - name:     - 名称：结帐
+      uses:       使用：actions/checkout@master
+    - name:     - name: 初始化环境
       env:
-        DEBIAN_FRONTEND: noninteractive
+        DEBIAN_FRONTEND:         DEBIAN_FRONTEND：非交互式
       run: |
         sudo apt-get update
         sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \
         cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \
         pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
-    - name: Clone source code
+    - name:     - 名称：克隆源代码
       run: |
-        git clone --depth=1 https://github.com/MeIsReallyBa/padavan-4.4.git /opt/rt-n56u
-        cd /opt/rt-n56u/toolchain-mipsel
+        git clone --depth=1 https://github.com/sunnyguhz/Padavan.git /opt/PSG1218
+        cd /opt/PSG1218/toolchain-mipsel
         sh dl_toolchain.sh
-        mkdir -p /opt/images/
-    - name: Build Firmware
-      env:
-        TNAME: K2P
-      run: |
-        cd /opt/rt-n56u/trunk
-        if [ ! -f configs/templates/$TNAME.config ] ; then
-        echo "configs/templates/$TNAME.config not found "
-        exit 1
-        fi
+        mkdir -p /opt/图像/
+    -名称：构建固件
+      环境：
+        名称： PSG1218
+      运行：|
+        cd /opt/PSG1218/trunk
+        如果 [ ！-f configs/templates/$TNAME.config ] ; 然后
+        echo“未找到配置/模板/$TNAME.config”
+        1号出口
+        菲
         cp -f configs/templates/$TNAME.config .config
         sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
-        ################################################################################################
-        #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！
-        ################################################################################################
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=y/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n/g' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_MENTOHUST=y/CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n/g' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=y/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n/g' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_SRELAY=y/CONFIG_FIRMWARE_INCLUDE_SRELAY=n/g' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=n/g' .config
-        ######################################################################
-        #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
-        ######################################################################
-        ##科学上网##
-        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #科学上网插件，选择n后全部有关插件都不集成
-        echo "CONFIG_FIRMWARE_INCLUDE_XRAY=n" >> .config #集成xray执行文件 ~4.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件
-        echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=y" >> .config #集成trojan执行文件 ~1.2M
-        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=y" >> .config #simple-obfs混淆插件
-        ##科学上网##
 
-        ##广告管理##
-        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
-        ##DNS服务##
-        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=n" >> .config #smartdns
-        echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=n" >> .config #adg DNS去AD
+
+
+
+
 
 
-        ##内网穿透服务##
-        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=y" >> .config #zerotier ~1.3M
-        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #aliddns
-        echo "CONFIG_FIRMWARE_INCLUDE_DDNSTO=y" >> .config #ddnsto ~0.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_WIREGUARD=y" >> .config #wireguard ~10k
-        ##内网穿透服务##
-        echo "CONFIG_FIRMWARE_INCLUDE_ALDRIVER=y" >> .config  #ALDRIVER  ~3m
-        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #mentohust
-
-        ##流控QOS##
-        echo "CONFIG_FIRMWARE_INCLUDE_SQM=y" >> .config #SQM QOS#CPU超频
-        echo "CONFIG_FIRMWARE_INCLUDE_OC=n" >> .config #CPU超频开关
-        echo 'CONFIG_FIRMWARE_MT7621_OC="0x312"' >> .config #此处填写对应频率的十六进制：1000Mhz=0x312 1100Mhz=0x362 1120Mhz=0x372 1200Mhz=0x3B2
 
-        #########################################################################################
-        #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
-        #格式如下：
-        #sed -i '/自定义项/d' .config
-        #echo "自定义项=y" >> .config
-        #########################################################################################
-        sudo ./clear_tree
+        须藤 ./clear_tree
         sudo ./build_firmware_modify $TNAME 0
-        sudo mv -f images/*.trx /opt/images/
-    - name : Upload packages
+        sudo mv -f 图片/*.trx /opt/images/
+    - name  :上传包
       uses: actions/upload-artifact@master
       if: always()
       with: