doc update

README.md

@@ -19,22 +19,23 @@ The main goal is to use modern sensors (mainly [I2C](https://github.com/orgua/iL
 - DS2450 4 channel A/D
 - **DS2890 Single channel digital potentiometer - extended to 1-4 CH**
 
-### Further features:
-- hot-plug slaves as needed
+### Features:
 - supports up to 32 slaves, adjust ONEWIRESLAVE_LIMIT in OneWireHub.h to safe some RAM (8 is standard)
+- hot-plug slaves as needed
 - cleaner, faster code with c++11 features (requires arduino 1.6.x or higher)
 - arduino-dependencies are found in the mockup "arduino.h" (for portability and tests)
 - hardware-dependencies are found in "platform.h", synced with [onewire-lib](https://github.com/PaulStoffregen/OneWire)
    - extra supported: arduino zero, teensy, sam3x, pic32, esp8266, nrf51822 (...)
 - good documentation, numerous examples, easy interface for hub and sensors
 
 ### Recent development (latest at the top): 
+- bug fix: non conformal behaviour as a onewire-slave (hopefully)
 - raise the maximal slave limit from 8 to 32, takes ~100b extra program-space
 - open up for a lot more platforms with "platform.h" (taken from onewire-lib)
 - fix bug: open-drain violation on slave side
 - per-bit-CRC16 with sendAndCRC16() and sendAndCRC16() for load-balancing, 900ns/bit instead of 7µs/byte on Atmega328@16MHz
 - add examples for onewire-master, for testing the bus
-- rework of checkReset() and showPresence() - Hub is much more reliable now and it saves ~120 byte program-space
+- rework of checkReset(), showPresence(), send(), recv() and the hole timings - Hub is much more reliable now and it saves ~120 byte program-space
 - faster CRC16 (ds2450 and ds2408 and ds2423), takes 5-7µs/byte instead of 10µs
 - refactored the interface: hub.poll() replaces hub.waitForRequest()
 - extended ds2890 to up to 4CH (datasheet has it covered), ds2413, ds2413 --> feature-complete
@@ -43,7 +44,6 @@ The main goal is to use modern sensors (mainly [I2C](https://github.com/orgua/iL
 
 ### Plans for the future:
 - implementation of ds2450
-- rework the onewire-timings
 - add table of tested and working sensors 
 - irq-handled hub on supported ports, split lib into onewire() and onewireIRQ()
 - test each example with real onewire-masters, for now it's tested with the onewire-lib and a loxone-system (ds18b20 passed)