This project aims to create a driver for the popular, low-cost ENC28J60 10Mbit/s Ethernet-Chip for the ethernut Real Time Operating System. While this project should work on any Hardware supported by the ethetnut-OS that has an SPI-bus, it is currently being developed on the WiFiMCU Chip (based on EMW3165, ARM(tm) Cortex M4 Chip).
The wiring diagram is provided for the SPI4-Bus, the only one that is fully accessible by the WiFiMCU Pins.
WiFiMCU <-----> ENC28J60
D12 (SCK) SCK
D1 (MOSI) MOSI (SI)
D14 (MISO) MISO (SO)
D4 (NSS) CS