Board: Zolertia remote
| MCU | CC2538 (ARM Cortex-M3 with on-board 2.4GHz radio) |
|---|---|
| Radio | Two radio interfaces (IEEE 802.15.4): 2.4GHz and 863-950MHz |
| RP-SMA connector for external antenna (with a RF switch to select either 2.4GHz/Sub-GHz radio) | |
| USB-to-Serial | CP2104 |
| Peripherals | RTCC, built-in battery charger for LiPo batteries, External WDT (optional), Micro-SD |
| Others | RGB LED, power management block (150nA when the mote is shutdown) |
The CC2538 is not fully supported yet, core components as 2.4GHz and I2C/SPI interfaces are currently not ported (but in progress). The CC1200 is not ported also.
The RE-Mote has built-in support to flash over USB using the BSL. Previous versions required to unlock the bootloader by manually pressing the user button and reset button, but the current version handles the sequence with an on-board PIC, so automatically unlocks the bootloader upon flashing.
e.g.
$ make BOARD=remote flash