Skip to content
Build

include py.typed in MANIFEST rather than setup #458

Sign in to view logs

include py.typed in MANIFEST rather than setup

include py.typed in MANIFEST rather than setup #458

Workflow file for this run

.github/workflows/build.yml at 697029f
name: Build
# Controls when the workflow will run
on:
# Triggers the workflow on push or pull request events but only for the master branch
push:
branches: [ master ]
pull_request:
branches: [ master ]
# Allows you to run this workflow manually from the Actions tab
workflow_dispatch:
jobs:
build-mac:
runs-on: macos-12
strategy:
matrix:
python-version: [ '3.8', '3.9', '3.10', '3.11', '3.12', '3.13.0-beta - 3.13.0', 'pypy-3.8', 'pypy-3.9', 'pypy-3.10' ]
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/checkout@v2
with:
submodules: recursive
- name: Setup Python
uses: actions/[email protected]
with:
# Version range or exact version of a Python version to use, using SemVer's version range syntax.
python-version: ${{ matrix.python-version }}
# The target architecture (x86, x64) of the Python interpreter.
architecture: x64
# Runs a set of commands using the runners shell
- name: Build raylib
run: |
cd raylib-c
mkdir build
cd build
cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
make -j2
sudo make install
- name: Copy extras
run: |
sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
sudo cp physac/src/physac.h /usr/local/include/
sudo cp raygui/src/raygui.h /usr/local/include/
- name: Build raylib-python-cffi
run: |
python -m pip install --upgrade pip
pip3 install "cffi>=1.17.1"
pip3 install wheel
pip3 install setuptools
python setup.py bdist_wheel --plat-name macosx_10_15_x86_64
- name: Upload build Artifact wheel
uses: actions/[email protected]
with:
name: wheel
path: dist/*
# build-mac12-arm64:
# runs-on: macos-12
# strategy:
# matrix:
# python-version: ['3.10', '3.11.0-alpha - 3.11.0' ]
# # Requires universal2 build of python, which we get if we ask for 3.10.5 x86! Pypy not available in universal2
# steps:
# - uses: actions/checkout@v2
# with:
# submodules: recursive
#
# - name: Setup Python
# uses: actions/[email protected]
# with:
# python-version: ${{ matrix.python-version }}
# architecture: x64
#
# # Only build raylib for arm64 (although we could make a fat universal2 binary by asking for x86_64 as well)
# - name: Build raylib
# run: |
# cd raylib-c
# mkdir build
# cd build
# cmake -DBUILD_EXAMPLES=off -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" -DINCLUDE_EVERYTHING=on -DSUPPORT_FILEFORMAT_JPG=on -DWITH_PIC=on -DCMAKE_BUILD_TYPE=Release ..
# make -j2
# sudo make install
# - name: Copy extras
# run: |
# sudo cp physac/src/physac.h /usr/local/include/
# sudo cp raygui/src/raygui.h /usr/local/include/
#
# # Name defaults to universal2 and it technically is, but we override name to arm64. Why don't we make a working universal2 wheel? Because
# # I'd rather have a separate x86_64 that I can test, and I want it to work on 10_15 but I'm not sure a 'macosx_10_15_universal2' is valid
# # given that there is no SDK for universal until macosx_11_0
# - name: Build raylib-python-cffi
# run: |
# python -m pip install --upgrade pip
# pip3 install cffi
# pip3 install wheel
# python setup.py bdist_wheel --plat-name macosx_12_0_arm64
#
#
# - name: Upload build Artifact wheel
# uses: actions/[email protected]
# with:
# name: wheel
# path: dist/*
#
#
# build-mac11-arm64:
# runs-on: macos-11
# strategy:
# matrix:
# python-version: [ '3.10.5' ]
# # Requires universal2 build of python, which we get if we ask for 3.10.5 x86! Pypy not available in universal2
# env:
# MACOSX_DEPLOYMENT_TARGET: 11.6
# steps:
# - uses: actions/checkout@v2
# with:
# submodules: recursive
#
# - name: Setup Python
# uses: actions/[email protected]
# with:
# python-version: ${{ matrix.python-version }}
# architecture: x64
#
# # build raylib for arm64 and x86_64 as well
# - name: Build raylib
# run: |
# cd raylib-c
# mkdir build
# cd build
# cmake -DBUILD_EXAMPLES=off -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" -DINCLUDE_EVERYTHING=on -DSUPPORT_FILEFORMAT_JPG=on -DWITH_PIC=on -DCMAKE_BUILD_TYPE=Release ..
# make -j2
# sudo make install
# - name: Copy extras
# run: |
# sudo cp physac/src/physac.h /usr/local/include/
# sudo cp raygui/src/raygui.h /usr/local/include/
#
#
# - name: Build raylib-python-cffi
# run: |
# python -m pip install --upgrade pip
# pip3 install cffi
# pip3 install wheel
# python setup.py bdist_wheel --plat-name macosx_11_0_arm64
#
# - name: Upload build Artifact wheel
# uses: actions/[email protected]
# with:
# name: wheel
# path: dist/*
#
build-linux:
runs-on: ubuntu-20.04
strategy:
# You can use PyPy versions in python-version.
# For example, pypy2 and pypy3
matrix:
python-version: [ '3.8', '3.9', '3.10', '3.11', '3.12', '3.13.0-beta - 3.13.0', 'pypy-3.8', 'pypy-3.9', 'pypy-3.10' ]
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/checkout@v2
with:
submodules: recursive
- name: Setup Python
uses: actions/[email protected]
with:
# Version range or exact version of a Python version to use, using SemVer's version range syntax.
python-version: ${{ matrix.python-version }}
# The target architecture (x86, x64) of the Python interpreter.
architecture: x64
# Runs a set of commands using the runners shell
- name: Build raylib
run: |
sudo apt update
sudo apt install libasound2-dev mesa-common-dev libx11-dev libxrandr-dev libxi-dev xorg-dev libgl1-mesa-dev libglu1-mesa-dev
cd raylib-c
mkdir build
cd build
cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release -DOpenGL_GL_PREFERENCE=GLVND ..
make -j2
sudo make install
- name: Copy extras
run: |
sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
sudo cp physac/src/physac.h /usr/local/include/
sudo cp raygui/src/raygui.h /usr/local/include/
- name: Build raylib-python-cffi
run: |
python -m pip install --upgrade pip
pip3 install "cffi>=1.17.1"
pip3 install wheel
pip3 install setuptools
python setup.py bdist_wheel --plat-name manylinux2014_x86_64
- name: Upload build Artifact wheel
uses: actions/[email protected]
with:
name: wheel
path: dist/*
# build-rpi:
# runs-on: rpi
# steps:
# # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
# - uses: actions/checkout@v2
# with:
# submodules: recursive
#
# - name: Build raylib
# run: |
# cd raylib-c
# mkdir build
# cd build
# cmake -DBUILD_EXAMPLES=off -DINCLUDE_EVERYTHING=on -DSUPPORT_FILEFORMAT_JPG=on -DWITH_PIC=on -DCMAKE_BUILD_TYPE=Release -DOpenGL_GL_PREFERENCE=GLVND ..
# make -j2
# make install
# - name: Copy extras
# run: |
# cp physac/src/physac.h /usr/local/include/
# cp raygui/src/raygui.h /usr/local/include/
#
# - name: Build raylib-python-cffi
# run: |
# python3 setup.py bdist_wheel
#
# - name: Upload build Artifact wheel
# uses: actions/[email protected]
# with:
# name: wheel
# path: dist/*
build-windows:
# The type of runner that the job will run on
runs-on: windows-2019
strategy:
# You can use PyPy versions in python-version.
# For example, pypy2 and pypy3
matrix:
python-version: [ '3.8', '3.9', '3.10', '3.11', '3.12', '3.13.0-beta - 3.13.0', 'pypy-3.8', 'pypy-3.9', 'pypy-3.10' ]
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/checkout@v2
with:
submodules: recursive
- name: Setup Python
uses: actions/[email protected]
with:
# Version range or exact version of a Python version to use, using SemVer's version range syntax.
python-version: ${{ matrix.python-version }}
# The target architecture (x86, x64) of the Python interpreter.
architecture: x64
- name: Add msbuild to PATH
uses: microsoft/[email protected]
- name: Build raylib
run: |
cd raylib-c
mkdir build
cd build
cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
msbuild raylib.sln /target:raylib /property:Configuration=Release
copy raylib\Release\raylib.lib ..\..
cd ..\..
shell: cmd
- name: Build raylib-python-cffi
run: |
python -m pip install --upgrade pip
pip3 install "cffi>=1.17.1"
pip3 install wheel
pip3 install setuptools
del raylib\dynamic\*.so* >nul 2>&1
del raylib\dynamic\*.dll >nul 2>&1
del raylib\dynamic\*.dylib >nul 2>&1
del raylib\dynamic\32bit\* >nul 2>&1
python setup.py bdist_wheel
shell: cmd
- name: Upload build Artifact wheel
uses: actions/[email protected]
with:
name: wheel
path: dist/*
source-distro:
runs-on: ubuntu-20.04
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/checkout@v2
with:
submodules: recursive
- name: Setup Python
uses: actions/[email protected]
with:
# Version range or exact version of a Python version to use, using SemVer's version range syntax.
python-version: '3.12'
# The target architecture (x86, x64) of the Python interpreter.
architecture: x64
- name: Build raylib
run: |
sudo apt update
sudo apt install libasound2-dev mesa-common-dev libx11-dev libxrandr-dev libxi-dev xorg-dev libgl1-mesa-dev libglu1-mesa-dev
cd raylib-c
mkdir build
cd build
cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
make -j2
sudo make install
- name: Copy extras
run: |
sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
sudo cp physac/src/physac.h /usr/local/include/
sudo cp raygui/src/raygui.h /usr/local/include/
- name: Build raylib-python-cffi
run: |
python -m pip install --upgrade pip
pip3 install "cffi>=1.17.1"
pip3 install wheel
pip3 install setuptools
python setup.py sdist
- name: Upload build Artifact wheel
uses: actions/[email protected]
with:
name: wheel
path: dist/*
dynamic-distro:
runs-on: ubuntu-20.04
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/checkout@v2
with:
submodules: recursive
- name: Setup Python
uses: actions/[email protected]
with:
# Version range or exact version of a Python version to use, using SemVer's version range syntax.
python-version: '3.12'
# The target architecture (x86, x64) of the Python interpreter.
architecture: x64
- name: Build raylib-python-cffi-dynamic
run: |
python -m pip install --upgrade pip
pip3 install "cffi>=1.17.1"
pip3 install wheel
pip3 install setuptools
cd dynamic
python setup.py sdist
- name: Upload build Artifact wheel
uses: actions/[email protected]
with:
name: wheel
path: dynamic/dist/*