fix 404

Signed-off-by: Bettygogo2021 <[email protected]>
daibaq0 · Jul 7, 2022 · 6852013 · 6852013
1 parent 0238e5d
commit 6852013
Show file tree

Hide file tree

Showing 14 changed files with 19 additions and 19 deletions.
diff --git a/content/en/common/csi-plugins.md b/content/en/common/csi-plugins.md
@@ -8,5 +8,5 @@ Kubernetes has announced that in-tree volume plugins will be removed from Kubern
 Supported CSI plugins:
 
 - [neonsan-csi](https://github.com/yunify/qingstor-csi)
-- {{< contentLink "docs/installing-on-linux/persistent-storage-configurations/install-qingcloud-csi/" "qingcloud-csi" >}}
-- {{< contentLink "docs/installing-on-linux/persistent-storage-configurations/install-ceph-csi-rbd/" "ceph-csi" >}}
+- [qingcloud-csi](../../../installing-on-linux/persistent-storage-configurations/install-qingcloud-csi/)
+- [ceph-csi](../../../installing-on-linux/persistent-storage-configurations/install-ceph-csi-rbd/)
diff --git a/content/en/common/network-requirements.md b/content/en/common/network-requirements.md
@@ -4,5 +4,5 @@ _build:
 ---
 
 - Make sure the DNS address in `/etc/resolv.conf` is available. Otherwise, it may cause some issues of DNS in the cluster.
-- If your network configuration uses firewall rules or security groups, you must ensure infrastructure components can communicate with each other through specific ports. It is recommended that you turn off the firewall. For more information, see {{< contentLink "docs/installing-on-linux/introduction/port-firewall/" "Port Requirements" >}}.
+- If your network configuration uses firewall rules or security groups, you must ensure infrastructure components can communicate with each other through specific ports. It is recommended that you turn off the firewall. For more information, see {{< contentLink "docs/v3.3/installing-on-linux/introduction/port-firewall/" "Port Requirements" >}}.
 - Supported CNI plugins: Calico and Flannel. Others (such as Cilium and Kube-OVN) may also work but note that they have not been fully tested.
diff --git a/....3/installing-on-kubernetes/on-prem-kubernetes/install-ks-on-linux-airgapped.md b/....3/installing-on-kubernetes/on-prem-kubernetes/install-ks-on-linux-airgapped.md
@@ -94,7 +94,7 @@ As you install KubeSphere in an air-gapped environment, you need to prepare an i
 
    {{< notice note >}}
 
-   This file lists images under `##+modulename` based on different modules. You can add your own images to this file following the same rule. To view the complete file, see [Appendix](../install-ks-on-linux-airgapped/#Image-list-of-KubeSphere-3.3.0).
+   This file lists images under `##+modulename` based on different modules. You can add your own images to this file following the same rule. To view the complete file, see [Appendix](#appendix).
 
    {{</ notice >}} 
 

diff --git a/...n/docs/v3.3/installing-on-linux/on-premises/install-kubesphere-on-bare-metal.md b/...n/docs/v3.3/installing-on-linux/on-premises/install-kubesphere-on-bare-metal.md
@@ -22,7 +22,7 @@ This tutorial uses 3 physical machines of **DELL 620 Intel (R) Xeon (R) CPU E5-2
 
 ### Install CentOS
 
-Download and install the [image](http://mirror1.es.uci.edu/centos/7.6.1810/isos/x86_64/CentOS-7-x86_64-DVD-1810.iso) first. Make sure you allocate at least 200 GB to the root directory where it stores docker images (you can skip this if you are installing KubeSphere for testing).
+Download and install the [image](https://www.centos.org/download/) first, and CentOS Linux release 7.6.1810 (Core) is recommended. Make sure you allocate at least 200 GB to the root directory where it stores docker images (you can skip this if you are installing KubeSphere for testing).
 
 For more information about the supported systems, see [System Requirements](../../../installing-on-linux/introduction/multioverview/). 
 

diff --git a/content/en/docs/v3.3/introduction/what-is-kubesphere.md b/content/en/docs/v3.3/introduction/what-is-kubesphere.md
@@ -30,7 +30,7 @@ The seamless integration of KubeSphere into existing Kubernetes platforms means
 
 ## Open Source
 
-With the open-source model, the KubeSphere community advances development in an open way. KubeSphere is **100% open source** and available on [GitHub](https://github.com/kubesphere/) where you can find all the source code, documents and discussions. It has been widely installed and used in development, testing and production environments, and a large number of services are running smoothly in KubeSphere. For more information about all major open-source projects, see [Open Source Projects](../../../projects/).
+With the open-source model, the KubeSphere community advances development in an open way. KubeSphere is **100% open source** and available on [GitHub](https://github.com/kubesphere/) where you can find all the source code, documents and discussions. It has been widely installed and used in development, testing and production environments, and a large number of services are running smoothly in KubeSphere. For more information about all major open-source projects, see [Open Source Projects](/projects/).
 
 ## Landscape
 

diff --git a/...v3.3/project-user-guide/custom-application-monitoring/visualization/overview.md b/...v3.3/project-user-guide/custom-application-monitoring/visualization/overview.md
@@ -54,7 +54,7 @@ You can modify an existing template by clicking **Edit Template** in the upper-r
 
 ### Add a chart
 
-To add text charts, click <img src="/images/docs/v3.3/project-user-guide/custom-application-monitoring/visualization/overview/plus-btn.png" height="15px" width="25px" /> in the left column. To add charts in the middle column, click **Add Monitoring Item** in the lower-right corner.
+To add text charts, click ➕ in the left column. To add charts in the middle column, click **Add Monitoring Item** in the lower-right corner.
 
 ### Add a monitoring group
 

diff --git a/content/zh/common/csi-plugins.md b/content/zh/common/csi-plugins.md
@@ -8,5 +8,5 @@ Kuberentes 此前已宣布将在 1.21 版本中移除树内 (in-tree) 存储插
 支持的 CSI 插件：
 
 - [neonsan-csi](https://github.com/yunify/qingstor-csi)
-- {{< contentLink "docs/installing-on-linux/persistent-storage-configurations/install-qingcloud-csi/" "qingcloud-csi" >}}
-- {{< contentLink "docs/installing-on-linux/persistent-storage-configurations/install-ceph-csi-rbd/" "ceph-csi" >}}
+- [qingcloud-csi](../../../installing-on-linux/persistent-storage-configurations/install-qingcloud-csi/)
+- [ceph-csi](../../../installing-on-linux/persistent-storage-configurations/install-ceph-csi-rbd/)
diff --git a/content/zh/common/network-requirements.md b/content/zh/common/network-requirements.md
@@ -4,5 +4,5 @@ _build:
 ---
 
 - 请确保 `/etc/resolv.conf` 中的 DNS 地址可用，否则，可能会导致集群中的 DNS 出现问题。
-- 如果您的网络配置使用防火墙规则或安全组，请务必确保基础设施组件可以通过特定端口相互通信。建议您关闭防火墙。有关更多信息，请参见{{< contentLink "docs/installing-on-linux/introduction/port-firewall/" "端口要求" >}}。
+- 如果您的网络配置使用防火墙规则或安全组，请务必确保基础设施组件可以通过特定端口相互通信。建议您关闭防火墙。有关更多信息，请参见{{< contentLink "docs/v3.3/installing-on-linux/introduction/port-firewall/" "端口要求" >}}。
 - 支持的 CNI 插件：Calico 和 Flannel。其他插件也适用（例如 Cilium 和 Kube-OVN 等），但请注意它们未经充分测试。
diff --git a/content/zh/docs/v3.3/application-store/built-in-apps/chaos-mesh-app.md b/content/zh/docs/v3.3/application-store/built-in-apps/chaos-mesh-app.md
@@ -13,7 +13,7 @@ linkTitle: "部署 Chaos Mesh"
 
 ## **准备工作**
 
-* 部署 [KubeSphere 应用商店](https://kubesphere.io/zh/docs/pluggable-components/app-store/)
+* 部署 [KubeSphere 应用商店](../../../pluggable-components/app-store/)。
 * 您需要为本教程创建一个企业空间、一个项目和两个帐户（ws-admin 和 project-regular）。帐户 ws-admin 必须在企业空间中被赋予 workspace-admin 角色，帐户 project-regular 必须被邀请至项目中赋予 operator 角色。若还未创建好，请参考[创建企业空间、项目、用户和角色](https://kubesphere.io/zh/docs/quick-start/create-workspace-and-project/)。
 
 

diff --git a/....3/installing-on-kubernetes/on-prem-kubernetes/install-ks-on-linux-airgapped.md b/....3/installing-on-kubernetes/on-prem-kubernetes/install-ks-on-linux-airgapped.md
@@ -95,7 +95,7 @@ Docker 使用 `/var/lib/docker` 作为默认路径来存储所有 Docker 相关
 
    {{< notice note >}}
 
-   该文件根据不同的模块列出了 `##+modulename` 下的镜像。您可以按照相同的规则把自己的镜像添加到这个文件中。若需要查看完整文件，请参见[附录](https://kubesphere.io/zh/docs/installing-on-kubernetes/on-prem-kubernetes/install-ks-on-linux-airgapped/#KubeSphere-3.3.0-镜像清单))。
+   该文件根据不同的模块列出了 `##+modulename` 下的镜像。您可以按照相同的规则把自己的镜像添加到这个文件中。若需要查看完整文件，请参见[附录](#附录)。
 
    {{</ notice >}} 
 

diff --git a/...h/docs/v3.3/installing-on-linux/on-premises/install-kubesphere-on-bare-metal.md b/...h/docs/v3.3/installing-on-linux/on-premises/install-kubesphere-on-bare-metal.md
@@ -22,7 +22,7 @@ KubeSphere 除了可以在云上安装，还可以在裸机上安装。由于在
 
 ### 安装 CentOS
 
-请提前下载并安装[ CentOS 镜像](http://mirror1.es.uci.edu/centos/7.6.1810/isos/x86_64/CentOS-7-x86_64-DVD-1810.iso)。请确保根目录已至少分配 200 GB 空间用于存储 Docker 镜像（如果 KubeSphere 仅用于测试，您可以跳过这一步）。
+请提前下载并安装[ CentOS 镜像](https://www.centos.org/download/)，推荐版本为 CentOS Linux release 7.6.1810 (Core)。请确保根目录已至少分配 200 GB 空间用于存储 Docker 镜像（如果 KubeSphere 仅用于测试，您可以跳过这一步）。
 
 有关系统要求的更多信息，请参见[系统要求](../../../installing-on-linux/introduction/multioverview/)。
 

diff --git a/content/zh/docs/v3.3/introduction/what-is-kubesphere.md b/content/zh/docs/v3.3/introduction/what-is-kubesphere.md
@@ -30,7 +30,7 @@ KubeSphere 可以在不修改用户当前的资源或资产、不影响其业务
 
 ## 完全开源
 
-借助开源的模式，KubeSphere 社区驱动着开发工作以开放的方式进行。KubeSphere **100% 开源免费**，已大规模服务于社区用户，广泛地应用在以 Docker 和 Kubernetes 为中心的开发、测试及生产环境中，大量服务平稳地运行在 KubeSphere 之上。您可在 [GitHub](https://github.com/kubesphere/) 上找到所有源代码、文档和讨论，所有主要的开源项目介绍可以在[开源项目列表](../../../projects/)中找到。
+借助开源的模式，KubeSphere 社区驱动着开发工作以开放的方式进行。KubeSphere **100% 开源免费**，已大规模服务于社区用户，广泛地应用在以 Docker 和 Kubernetes 为中心的开发、测试及生产环境中，大量服务平稳地运行在 KubeSphere 之上。您可在 [GitHub](https://github.com/kubesphere/) 上找到所有源代码、文档和讨论，所有主要的开源项目介绍可以在[开源项目列表](../../../../projects/)中找到。
 
 ## 云原生 Landscape
 

diff --git a/...v3.3/project-user-guide/custom-application-monitoring/visualization/overview.md b/...v3.3/project-user-guide/custom-application-monitoring/visualization/overview.md
@@ -54,7 +54,7 @@ KubeSphere 为 MySQL、Elasticsearch 和 Redis 提供内置模板方便您快速
 
 ### 添加图表
 
-若要添加文本图表，点击左侧栏中的 <img src="/images/docs/v3.3/zh-cn/project-user-guide/custom-application-monitoring/visualization/overview/plus-btn.png" height="15px" width="25px" />。若要在中间栏添加图表，点击右下角的**添加监控项**。
+若要添加文本图表，点击左侧栏中的 ➕。若要在中间栏添加图表，点击右下角的**添加监控项**。
 
 ### 添加监控组
 

diff --git a/data/zh/footer.yaml b/data/zh/footer.yaml
@@ -39,13 +39,13 @@ footer:
     - title: 文档中心
       list:
         - content: 产品介绍
-          link: '/docs/introduction/what-is-kubesphere/'
+          link: '../../../docs/introduction/what-is-kubesphere/'
         - content: 如何安装
-          link: '/docs/quick-start/all-in-one-on-linux/'
+          link: '../../../docs/quick-start/all-in-one-on-linux/'
         - content: 快速入门
-          link: '/docs/quick-start/create-workspace-and-project/'
+          link: '../../../docs/quick-start/create-workspace-and-project/'
         - content: API 文档
-          link: '/docs/reference/api-docs/'
+          link: '../../../docs/reference/api-docs/'
 
     - title: 开源社区
       list: