Readme

bmellink · Mar 18, 2019 · 0082223 · 0082223
1 parent 4b19f98
commit 0082223
Show file tree

Hide file tree

Showing 2 changed files with 3 additions and 3 deletions.
diff --git a/README.md b/README.md
@@ -1,4 +1,4 @@
-# Arduino RC iBus protocol handler
+# Arduino Flysky/Turnigy RC iBus protocol handler
 Arduino library for Flysky/Turnigy RC iBUS protocol - servo (receive) and sensors/telemetry (send) using hardware UART.
 
 The iBUS protocol is a half-duplex protocol developed by Flysky to control multiple servos and motors using a single digital line. The values received for each servo channel are between 1000 (hex eE8) and 2000 (hex 7D0) with neutral sub trim setting, which corresponds with the pulse width in microseconds for most servos.

diff --git a/library.properties b/library.properties
@@ -1,9 +1,9 @@
 name=IBusBM
-version=1.0.0
+version=1.0.1
 author=Bart Mellink
 maintainer=Bart Mellink
 sentence=Arduino library for the Flysky/Turnigy RC iBUS protocol - servo (receive) and sensors/telemetry (send) using hardware UART
-paragraph=With this library you can interface to any RC receiver (such as TGY-IA6B) that supports the Flysky iBUS protocol. Flysky iBUS uses a half-duplex asynchronous protocol format at 115200 baud. The library requires at least one free hardware UART (serial) port. The library can be used to receive data (typically servo data) and send data (telemetry or sensors).
+paragraph=With this library you can interface to any RC receiver that supports the Flysky iBUS protocol (such as TGY-IA6B). Flysky iBUS uses a half-duplex asynchronous protocol format at 115200 baud. The library requires at least one free hardware UART (serial) port. The library can be used to receive data (typically servo data) and send data (telemetry or sensors).
 category=Communication
 url=https://github.com/bmellink/IBusBM
 architectures=avr