Merge 4.14.203 into android-4.14-stable

Changes in 4.14.203
	ibmveth: Switch order of ibmveth_helper calls.
	ibmveth: Identify ingress large send packets.
	ipv4: Restore flowi4_oif update before call to xfrm_lookup_route
	mlx4: handle non-napi callers to napi_poll
	net: usb: qmi_wwan: add Cellient MPL200 card
	tipc: fix the skb_unshare() in tipc_buf_append()
	net/ipv4: always honour route mtu during forwarding
	r8169: fix data corruption issue on RTL8402
	binder: fix UAF when releasing todo list
	ALSA: bebob: potential info leak in hwdep_read()
	net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
	net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
	nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()
	tcp: fix to update snd_wl1 in bulk receiver fast path
	icmp: randomize the global rate limiter
	cifs: remove bogus debug code
	cifs: Return the error from crypt_message when enc/dec key not found.
	KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages
	KVM: SVM: Initialize prev_ga_tag before use
	ima: Don't ignore errors from crypto_shash_update()
	crypto: algif_aead - Do not set MAY_BACKLOG on the async path
	EDAC/i5100: Fix error handling order in i5100_init_one()
	x86/fpu: Allow multiple bits in clearcpuid= parameter
	drivers/perf: xgene_pmu: Fix uninitialized resource struct
	crypto: algif_skcipher - EBUSY on aio should be an error
	crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()
	crypto: ixp4xx - Fix the size used in a 'dma_free_coherent()' call
	media: tuner-simple: fix regression in simple_set_radio_freq
	media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"
	media: m5mols: Check function pointer in m5mols_sensor_power
	media: uvcvideo: Set media controller entity functions
	media: omap3isp: Fix memleak in isp_probe
	crypto: omap-sham - fix digcnt register handling with export/import
	cypto: mediatek - fix leaks in mtk_desc_ring_alloc
	media: mx2_emmaprp: Fix memleak in emmaprp_probe
	media: tc358743: initialize variable
	media: platform: fcp: Fix a reference count leak.
	media: s5p-mfc: Fix a reference count leak
	media: ti-vpe: Fix a missing check and reference count leak
	regulator: resolve supply after creating regulator
	ath10k: provide survey info as accumulated data
	Bluetooth: hci_uart: Cancel init work before unregistering
	ath6kl: prevent potential array overflow in ath6kl_add_new_sta()
	ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()
	wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680
	ASoC: qcom: lpass-platform: fix memory leak
	ASoC: qcom: lpass-cpu: fix concurrency issue
	brcmfmac: check ndev pointer
	mwifiex: Do not use GFP_KERNEL in atomic context
	drm/gma500: fix error check
	scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'
	scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()
	backlight: sky81452-backlight: Fix refcount imbalance on error
	VMCI: check return value of get_user_pages_fast() for errors
	tty: serial: earlycon dependency
	tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()
	pty: do tty_flip_buffer_push without port->lock in pty_write
	pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()
	pwm: lpss: Add range limit check for the base_unit register value
	drivers/virt/fsl_hypervisor: Fix error handling path
	video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error
	video: fbdev: sis: fix null ptr dereference
	HID: roccat: add bounds checking in kone_sysfs_write_settings()
	pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser
	pinctrl: mcp23s08: Fix mcp23x17 precious range
	ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()
	misc: mic: scif: Fix error handling path
	ALSA: seq: oss: Avoid mutex lock for a long-time ioctl
	usb: dwc2: Fix parameter type in function pointer prototype
	quota: clear padding in v2r1_mem2diskdqb()
	HID: hid-input: fix stylus battery reporting
	qtnfmac: fix resource leaks on unsupported iftype error return path
	net: enic: Cure the enic api locking trainwreck
	mfd: sm501: Fix leaks in probe()
	iwlwifi: mvm: split a print to avoid a WARNING in ROC
	usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.
	usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well
	nl80211: fix non-split wiphy information
	usb: dwc2: Fix INTR OUT transfers in DDMA mode.
	scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
	mwifiex: fix double free
	net: korina: fix kfree of rx/tx descriptor array
	mm/memcg: fix device private memcg accounting
	mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
	IB/mlx4: Fix starvation in paravirt mux/demux
	IB/mlx4: Adjust delayed work when a dup is observed
	powerpc/pseries: Fix missing of_node_put() in rng_init()
	powerpc/icp-hv: Fix missing of_node_put() in success path
	mtd: lpddr: fix excessive stack usage with clang
	mtd: mtdoops: Don't write panic data twice
	ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
	arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER
	xfs: limit entries returned when counting fsmap records
	RDMA/qedr: Fix use of uninitialized field
	powerpc/tau: Use appropriate temperature sample interval
	powerpc/tau: Remove duplicated set_thresholds() call
	powerpc/tau: Disable TAU between measurements
	perf intel-pt: Fix "context_switch event has no tid" error
	RDMA/hns: Set the unsupported wr opcode
	kdb: Fix pager search for multi-line strings
	overflow: Include header file with SIZE_MAX declaration
	powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints
	powerpc/perf/hv-gpci: Fix starting index value
	cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
	IB/rdmavt: Fix sizeof mismatch
	f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
	lib/crc32.c: fix trivial typo in preprocessor condition
	ramfs: fix nommu mmap with gaps in the page cache
	rapidio: fix error handling path
	rapidio: fix the missed put_device() for rio_mport_add_riodev
	mailbox: avoid timer start from callback
	i2c: rcar: Auto select RESET_CONTROLLER
	PCI: iproc: Set affinity mask on MSI interrupts
	clk: at91: clk-main: update key before writing AT91_CKGR_MOR
	clk: bcm2835: add missing release if devm_clk_hw_register fails
	ext4: limit entries returned when counting fsmap records
	vfio/pci: Clear token on bypass registration failure
	vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
	Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
	Input: stmfts - fix a & vs && typo
	Input: ep93xx_keypad - fix handling of platform_get_irq() error
	Input: omap4-keypad - fix handling of platform_get_irq() error
	Input: twl4030_keypad - fix handling of platform_get_irq() error
	Input: sun4i-ps2 - fix handling of platform_get_irq() error
	KVM: x86: emulating RDPID failure shall return #UD rather than #GP
	memory: omap-gpmc: Fix a couple off by ones
	memory: fsl-corenet-cf: Fix handling of platform_get_irq() error
	arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
	ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
	arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
	powerpc/powernv/dump: Fix race while processing OPAL dump
	nvmet: fix uninitialized work for zero kato
	NTB: hw: amd: fix an issue about leak system resources
	perf: correct SNOOPX field offset
	i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
	crypto: ccp - fix error handling
	media: firewire: fix memory leak
	media: ati_remote: sanity check for both endpoints
	media: st-delta: Fix reference count leak in delta_run_work
	media: sti: Fix reference count leaks
	media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync
	media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync
	media: exynos4-is: Fix a reference count leak
	media: vsp1: Fix runtime PM imbalance on error
	media: platform: s3c-camif: Fix runtime PM imbalance on error
	media: platform: sti: hva: Fix runtime PM imbalance on error
	media: bdisp: Fix runtime PM imbalance on error
	media: media/pci: prevent memory leak in bttv_probe
	media: uvcvideo: Ensure all probed info is returned to v4l2
	mmc: sdio: Check for CISTPL_VERS_1 buffer size
	media: saa7134: avoid a shift overflow
	fs: dlm: fix configfs memory leak
	media: venus: core: Fix runtime PM imbalance in venus_probe
	ntfs: add check for mft record size in superblock
	mac80211: handle lack of sband->bitrates in rates
	PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
	scsi: mvumi: Fix error return in mvumi_io_attach()
	scsi: target: core: Add CONTROL field for trace events
	mic: vop: copy data to kernel space then write to io memory
	misc: vop: add round_up(x,4) for vring_size to avoid kernel panic
	usb: gadget: function: printer: fix use-after-free in __lock_acquire
	udf: Limit sparing table size
	udf: Avoid accessing uninitialized data on failed inode read
	USB: cdc-acm: handle broken union descriptors
	can: flexcan: flexcan_chip_stop(): add error handling and propagate error value
	ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()
	misc: rtsx: Fix memory leak in rtsx_pci_probe
	reiserfs: only call unlock_new_inode() if I_NEW
	xfs: make sure the rt allocator doesn't run off the end
	usb: ohci: Default to per-port over-current protection
	Bluetooth: Only mark socket zapped after unlocking
	scsi: ibmvfc: Fix error return in ibmvfc_probe()
	brcmsmac: fix memory leak in wlc_phy_attach_lcnphy
	rtl8xxxu: prevent potential memory leak
	Fix use after free in get_capset_info callback.
	scsi: qedi: Protect active command list to avoid list corruption
	scsi: qedi: Fix list_del corruption while removing active I/O
	tty: ipwireless: fix error handling
	ipvs: Fix uninit-value in do_ip_vs_set_ctl()
	reiserfs: Fix memory leak in reiserfs_parse_options()
	mwifiex: don't call del_timer_sync() on uninitialized timer
	brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach
	usb: core: Solve race condition in anchor cleanup functions
	scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()
	ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()
	net: korina: cast KSEG0 address to pointer in kfree
	tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
	usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
	USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().
	eeprom: at25: set minimum read/write access stride to 1
	usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.
	powerpc/powernv/opal-dump : Use IRQ_HANDLED instead of numbers in interrupt handler
	Linux 4.14.203

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: Ia4c1c9fc1a8d03c662b37fbe1448b4fb1f88007a

Documentation/admin-guide/kernel-parameters.txt

@@ -552,7 +552,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily

Documentation/networking/ip-sysctl.txt

@@ -915,12 +915,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
-SUBLEVEL = 202
+SUBLEVEL = 203
 EXTRAVERSION =
 NAME = Petit Gorille
 

arch/arc/plat-hsdk/Kconfig

@@ -11,4 +11,5 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK

arch/arm/boot/dts/owl-s500.dtsi

@@ -82,21 +82,21 @@
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 

arch/arm/mm/cache-l2x0.c

@@ -1261,20 +1261,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -818,7 +818,7 @@
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -850,7 +850,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -410,7 +410,7 @@
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -420,7 +420,7 @@
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;

arch/powerpc/include/asm/reg.h

@@ -753,7 +753,7 @@
 #define THRM1_TIN	(1 << 31)
 #define THRM1_TIV	(1 << 30)
 #define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM3_SITV(x)	((x & 0x1fff) << 1)
 #define THRM1_TID	(1<<2)
 #define THRM1_TIE	(1<<1)
 #define THRM1_V		(1<<0)

arch/powerpc/kernel/tau_6xx.c

@@ -38,8 +38,6 @@ static struct tau_temp
 
 struct timer_list tau_timer;
 
-#undef DEBUG
-
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
  * dynamic adjustment to minimize # of interrupts */
 /* configurable values for step size and how much to expand the window when
@@ -72,47 +70,33 @@ void set_thresholds(unsigned long cpu)
 
 void TAUupdate(int cpu)
 {
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
+	u32 thrm;
+	u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
 
 	/* if both thresholds are crossed, the step_sizes cancel out
 	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM1);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM1, 0);
+
+		if (tau[cpu].low >= step_size) {
+			tau[cpu].low -= step_size;
+			tau[cpu].high -= (step_size - window_expand);
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: low threshold crossed\n", __func__);
 	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM2);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM2, 0);
+
+		if (tau[cpu].high <= 127 - step_size) {
+			tau[cpu].low += (step_size - window_expand);
+			tau[cpu].high += step_size;
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: high threshold crossed\n", __func__);
 	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
 }
 
 #ifdef CONFIG_TAU_INT
@@ -137,18 +121,18 @@ void TAUException(struct pt_regs * regs)
 static void tau_timeout(void * info)
 {
 	int cpu;
-	unsigned long flags;
 	int size;
 	int shrink;
 
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
 	cpu = smp_processor_id();
 
 #ifndef CONFIG_TAU_INT
 	TAUupdate(cpu);
 #endif
 
+	/* Stop thermal sensor comparisons and interrupts */
+	mtspr(SPRN_THRM3, 0);
+
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
 		/* do an exponential shrink of half the amount currently over size */
@@ -170,22 +154,12 @@ static void tau_timeout(void * info)
 
 	set_thresholds(cpu);
 
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
+	/* Restart thermal sensor comparisons and interrupts.
+	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+	 * recommends that "the maximum value be set in THRM3 under all
+	 * conditions."
 	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
-
-	local_irq_restore(flags);
+	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
 }
 
 static void tau_timeout_smp(unsigned long unused)

arch/powerpc/perf/hv-gpci-requests.h

@@ -95,7 +95,7 @@ REQUEST(__field(0,	8,	partition_id)
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__field(0,	1,	perf_collect_privileged)
 	__field(0x1,	1,	capability_mask)
@@ -223,7 +223,7 @@ REQUEST(__field(0,	2, partition_id)
 
 #define REQUEST_NAME system_hypervisor_times
 #define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 	__count(0x8,	8,	time_spent_processing_virtual_processor_timers)
@@ -234,7 +234,7 @@ REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 
 #define REQUEST_NAME system_tlbie_count_and_time
 #define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	tlbie_instructions_issued)
 	/*

arch/powerpc/perf/isa207-common.c

@@ -275,6 +275,15 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 
 		mask  |= CNST_PMC_MASK(pmc);
 		value |= CNST_PMC_VAL(pmc);
+
+		/*
+		 * PMC5 and PMC6 are used to count cycles and instructions and
+		 * they do not support most of the constraint bits. Add a check
+		 * to exclude PMC5/6 from most of the constraints except for
+		 * EBB/BHRB.
+		 */
+		if (pmc >= 5)
+			goto ebb_bhrb;
 	}
 
 	if (pmc <= 4) {
@@ -333,6 +342,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 		}
 	}
 
+ebb_bhrb:
 	if (!pmc && ebb)
 		/* EBB events must specify the PMC */
 		return -1;

arch/powerpc/platforms/Kconfig

@@ -243,20 +243,15 @@ config TAU
 	  temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
 	depends on TAU
 	---help---
 	  The TAU supports an interrupt driven mode which causes an interrupt
 	  whenever the temperature goes out of range. This is the fastest way
 	  to get notified the temp has exceeded a range. With this option off,
 	  a timer is used to re-check the temperature periodically.
 
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
+	  If in doubt, say N here.
 
 config TAU_AVERAGE
 	bool "Average high and low temp"