refactor: moves cc related docs to hardware

HARDWARE.md

@@ -32,7 +32,17 @@ Our T15 Multi Tech Reader is connected to the Controller 7000 Single Door. Our s
 
 ## Command Centre Setup
 
-Before you begin you will require:
+> [!IMPORTANT]\
+> You should either refer to the Gallagher Documentation for detailed information on configuring the Command Centre. You also require a license from Gallagher for this feature to work.
+> If you are unsure, please contact your Gallagher representative as misconfiguration can lead to security vulnerabilities.
+
+Your checklist, before you proceed to using the REST features:
+
+- You are running Command Centre version `8.60` or higher, older versions predate the gateway so cannot support it
+- The gateway enabled at the system level
+- If it is, has the gateway been enabled for your specific API key
+
+You will also require:
 
 - MAC address of the Controller 7000 Single Door (found on the inside of the controller)
 - Serial number of the T15 Multi Tech Reader (found on the back of the reader)
@@ -51,6 +61,32 @@ Alarm Zone
 
 Access Group
 
+### Enabling the REST API Cloud Gateway
+
+All of the above requires you to have an understanding of the Gallagher Command Centre and how to configure it.
+
+To check the system level gateway status:
+
+- Open the Command Centre Configuration Client
+- From the `Configure` menu, select `Services and Workstations`
+- Find the `Command Centre Cloud` item and double-click it
+- Switch to the `Configuration` page, it should look something like this:
+
+![Command Centre Cloud Configuration](https://raw.githubusercontent.com/anomaly/gallagher/master/assets/gallagher-command-centre-properties.png)
+
+To check your API key:
+
+- Open the Command Centre Configuration Client
+- From the `Configure` menu, select `Services and Workstations`
+- Find the item that represents your REST Client
+- Switch to the `Connections` page, it should look something like this
+
+![Command Centre Cloud Connections](https://raw.githubusercontent.com/anomaly/gallagher/master/assets/gallagher-rest-properties.png)
+
+> [!CAUTION]\
+> All operations require the use of the API key. Never distribute your API key or store it somewhere that is not secure.
+> For security it's recommended you read the API key from an environment variable.
+
 ## AWS and the Local Setup
 
 Gallagher provides ample documentation on how to configure the Controller and a remote Control Centre instance to communicate with each other. Most of the setup complication are around NAT (and security). These are some steps I took note of which putting together our setup.

README.md

@@ -327,45 +327,9 @@ In this example the `AppGroupRef` has a `name` attribute which is not present in
 
 > Please see the schema section for naming conventions for `schema` classes
 
-## Configuring the Command Centre
-
-All of the above requires you to have an understanding of the Gallagher Command Centre and how to configure it.
-
-> [!IMPORTANT]\
-> You should either refer to the Gallagher Documentation for detailed information on configuring the Command Centre. You also require a license from Gallagher for this feature to work.
-> If you are unsure, please contact your Gallagher representative as misconfiguration can lead to security vulnerabilities.
-
-Your checklist, before you proceed to using the REST features:
-
-- You are running Command Centre version `8.60` or higher, older versions predate the gateway so cannot support it
-- The gateway enabled at the system level
-- If it is, has the gateway been enabled for your specific API key
-
-To check the system level gateway status:
-
-- Open the Command Centre Configuration Client
-- From the `Configure` menu, select `Services and Workstations`
-- Find the `Command Centre Cloud` item and double-click it
-- Switch to the `Configuration` page, it should look something like this:
-
-![Command Centre Cloud Configuration](https://raw.githubusercontent.com/anomaly/gallagher/master/assets/gallagher-command-centre-properties.png)
-
-To check your API key:
-
-- Open the Command Centre Configuration Client
-- From the `Configure` menu, select `Services and Workstations`
-- Find the item that represents your REST Client
-- Switch to the `Connections` page, it should look something like this
-
-![Command Centre Cloud Connections](https://raw.githubusercontent.com/anomaly/gallagher/master/assets/gallagher-rest-properties.png)
-
-> [!CAUTION]\
-> All operations require the use of the API key. Never distribute your API key or store it somewhere that is not secure.
-> For security it's recommended you read the API key from an environment variable.
-
 ## Resources
 
-The following are resources that were discoverd during the design and development of this library.
+The following are resources that were discoverd during the design and development of these tools. Not all of them are in use by the toolkit, they were discovered as the library evolved.
 
 ### Python Libraries