format raspi pico implementaion

Sensirion · Feb 4, 2025 · 33cdddf · 33cdddf
1 parent d165a99
commit 33cdddf
Show file tree

Hide file tree

Showing 2 changed files with 15 additions and 10 deletions.
diff --git a/sample-implementations/RaspberryPi_Pico/main.c b/sample-implementations/RaspberryPi_Pico/main.c
@@ -24,7 +24,7 @@ int main(void) {
     gpio_pull_up(sda_pin);
     gpio_pull_up(scl_pin);
 
-    // Initialize driver with i2c address 
+    // Initialize driver with i2c address
     scd4x_init(SCD41_I2C_ADDR_62);
 
     int status;
@@ -43,7 +43,8 @@ int main(void) {
         printf("Unable to get sensor serial number. Error: %d\n", status);
         return status;
     }
-    printf("Sensor serial number is: 0x%x 0x%x 0x%x\n", (int)serial_number[0], (int)serial_number[1], (int)serial_number[2]);
+    printf("Sensor serial number is: 0x%x 0x%x 0x%x\n", (int)serial_number[0],
+           (int)serial_number[1], (int)serial_number[2]);
 
     // Start the readings.
     status = scd4x_start_periodic_measurement();
@@ -60,15 +61,16 @@ int main(void) {
             sleep_ms(10);
             status = scd4x_get_data_ready_status(&dataReady);
             if (status) {
-                printf("Unable to get sensor readiness status. Error %d.\n", status);
+                printf("Unable to get sensor readiness status. Error %d.\n",
+                       status);
                 return status;
             }
         } while (!dataReady);
 
         // Read the measurement data and convert it to common units.
-        uint16_t co2Raw; // ppm
-        int32_t temperatureRaw; // millicelsius
-        int32_t humidityRaw; // millipercent
+        uint16_t co2Raw;         // ppm
+        int32_t temperatureRaw;  // millicelsius
+        int32_t humidityRaw;     // millipercent
         status = scd4x_read_measurement(&co2Raw, &temperatureRaw, &humidityRaw);
         if (status) {
             printf("Unable to read measurement data. Error: %d\n", status);
@@ -81,6 +83,7 @@ int main(void) {
         const float humidityPercent = humidityRaw / 1000.0f;
 
         printf("CO2: %d ppm, Temperature: %.1f C (%.1f F), Humidity: %.1f%%\n",
-            co2Ppm, temperatureCelsius, temperatureFahrenheit, humidityPercent);
+               co2Ppm, temperatureCelsius, temperatureFahrenheit,
+               humidityPercent);
     }
 }
diff --git a/sample-implementations/RaspberryPi_Pico/sensirion_i2c_hal.c b/sample-implementations/RaspberryPi_Pico/sensirion_i2c_hal.c
@@ -29,9 +29,9 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include "../../sensirion_i2c_hal.h"
 #include "../../sensirion_common.h"
 #include "../../sensirion_config.h"
-#include "../../sensirion_i2c_hal.h"
 
 #include <hardware/i2c.h>
 #include <pico/time.h>
@@ -47,7 +47,8 @@
  * @returns 0 on success, error code otherwise
  */
 int8_t sensirion_i2c_hal_read(uint8_t address, uint8_t* data, uint8_t count) {
-    const bool nostop = true; // master retains control of the bus after the read
+    const bool nostop =
+        true;  // master retains control of the bus after the read
     return !i2c_read_blocking(i2c_default, address, data, count, nostop);
 }
 
@@ -64,7 +65,8 @@ int8_t sensirion_i2c_hal_read(uint8_t address, uint8_t* data, uint8_t count) {
  */
 int8_t sensirion_i2c_hal_write(uint8_t address, const uint8_t* data,
                                uint8_t count) {
-    const bool nostop = true; // master retains control of the bus after the write
+    const bool nostop =
+        true;  // master retains control of the bus after the write
     return !i2c_write_blocking(i2c_default, address, data, count, nostop);
 }