Small fixes in docs.

This commit introduce some fixes in docs after cross-build
on Ubuntu 24.04. Additionaly Python venv directory was added
into .gitignore file.

ONE-DCO-1.0-Signed-off-by: Marcin Słowiński <[email protected]>

.gitignore

@@ -24,3 +24,6 @@
 
 # Makefile
 /Makefile
+
+# Python virtualenv
+/.venv

docs/howto/how-to-build-runtime.md

@@ -36,9 +36,44 @@ scons \
 software-properties-common \
 unzip \
 wget
+```
+
+## Install python packages
+
+Python package `numpy` is needed for build. It's recommended to always install python packages in virtualenv.
+To do this, at first you need to install python venv package:
+
+```
+$ sudo apt-get install python3-venv
+```
+Next, create virtualenv in `.venv` directory:
+
+```
+$ python3 -m venv .venv
+```
+
+and activate it (please keep in mind that you will have to activate it always before build)
+
+```
+$ source /.venv/bin/activate
+```
+
+Next, just in case upgrade pip package:
+
+```
+(.venv)$ pip install -U pip
+```
 
-$ pip3 install yapf==0.40.2 numpy
+and finally install `numpy`:
 
+```
+(.venv)$ pip install numpy
+```
+
+Additionally, package `yapf` is needed in specific version:
+
+```
+(.venv)$ pip install yapf==0.40.2
 ```
 
 ## Build from source code, for Ubuntu
@@ -48,6 +83,7 @@ In a typical linux development environment, including Ubuntu, you can build the
 ```
 $ git clone https://github.com/Samsung/ONE.git one
 $ cd one
+$ source /.venv/bin/activate
 $ ./nnfw configure
 $ ./nnfw build
 $ ./nnfw install

docs/howto/how-to-cross-build-runtime-for-arm.md

@@ -25,7 +25,7 @@ RootFS will be prepared at `tools/cross/rootfs/arm` or `tools/cross/rootfs/aarch
 
 ***\* CAUTION: The OS version of rootfs must match the OS version of execution target device. On the other hand, you need to match the Ubuntu version of the development PC with the Ubuntu version of rootfs to be used for cross-build. Otherwise, unexpected build errors may occur.***
 
-If you are using Ubuntu 20.04 LTS, select `focal`, if you are using Ubuntu 22.04 LTS, select `jammy`. You can check your Ubuntu code name in the following way.
+If you are using Ubuntu 20.04 LTS, select `focal`, if you are using Ubuntu 22.04 LTS, select `jammy`, for Ubuntu 24.04 LTS, select `noble`. You can check your Ubuntu code name in the following way.
 
 ```
 $ cat /etc/lsb-release
@@ -81,7 +81,7 @@ If you select specific version, update symbolic link for build toolchain.
 Otherwise, you should set your custom cmake crossbuild toolchain. You can find cmake toolchain files in `infra/nnfw/cmake/buildtool/cross/`.
 
 ```
-$ update-alternatives --install /usr/bin/arm-linux-gnueabihf-gcc arm-linux-gnueabihf-gcc /usr/bin/arm-linux-gnueabihf-gcc-10 80 \
+$ sudo update-alternatives --install /usr/bin/arm-linux-gnueabihf-gcc arm-linux-gnueabihf-gcc /usr/bin/arm-linux-gnueabihf-gcc-10 80 \
     --slave /usr/bin/arm-linux-gnueabihf-g++ arm-linux-gnueabihf-g++ /usr/bin/arm-linux-gnueabihf-g++-10 \
     --slave /usr/bin/arm-linux-gnueabihf-gcov arm-linux-gnueabihf-gcov /usr/bin/arm-linux-gnueabihf-gcov-10
 ```
@@ -104,17 +104,27 @@ ACL source will be automatically installed in `externals/ARMCOMPUTE` when you bu
 
 You can check ACL source information in `infra/cmake/packages/ARMComputeSourceConfig.cmake`
 
+## Install numpy
+
+Python package `numpy` is needed for build. Please use [this guide](how-to-build-runtime.md##install-python-packages) to install it.
+
 ## Cross build for ARM by using Makefile.template
 
 Give `TARGET_ARCH` variable to set the target architecture.
 
 If you used `ROOTFS_DIR` to prepare in alternative folder, you should also give this to makefile.
 
+Remember to activate venv if you didn't activate it already:
+
+```
+$ source /.venv/bin/activate
+```
+
 ```
-$ CROSS_BUILD=1 TARGET_ARCH=armv7l make -f Makefile.template
+(.venv)$ CROSS_BUILD=1 TARGET_ARCH=armv7l make -f Makefile.template
 
 # If ROOTFS_DIR is in alternative folder
-$ ROOTFS_DIR=/path/to/your/rootfs/arm \
+(.venv)$ ROOTFS_DIR=/path/to/your/rootfs/arm \
 CROSS_BUILD=1 TARGET_ARCH=armv7l make
 ```