CRBasic unit tests, integration test, and final deployment files for the OSU Climate Monitoring Station
These CRBasic programs assume sensor(s) are polled, i.e., a RS-232 or SDI-12 command summons data from each sensor.
- ECO-SUNA-Polled.CR1X
- ECO-SUNA-SeapHOx-EXO-Polled.CR1X (for Deployment)
- ECO-SUNA-SeapHOx-Polled.CR1X
- EXO-Polled_SDI12.CR1X
- EcoTriplet-Polled.CR1X
- EcoTriplet2.CR1X (Two EcoTriplets)
- SUNA-Polled.CR1X
- SeapHOx-Polled.CR1X
- YSI-Polled_RS232.CR1X
These CRBasic programs assume the sensor is sampling continuously and does not need to be commanded to start sampling.
- EcoTriplet-Continous.CR1X
- SUNA-Continuous.CR1X
- YSI-Continuous_RS232.CR1X
Note that YSI and EXO prefixes refer to the same YSI EXO2 instrument. The EXO prefix is reserved for CRBasic programs that access the instrument using the SDI-12 interface on the YSI DCP Signal Output Adapter.