net: ethernet: s10hssi: fix the crash in the ipv6 network #6

chenquanquan · 2021-03-24T03:48:16Z

This patch simply fills ndo_start_xmit() in netdev and no other
operations.

In the ipv6 network, after the date is sent, the netdev ndo_start_xmit()
hook will be called. But s10ssi does not fill the ndo_start_xmit() in
netdev, so it will case a "NULL pointer" crash.

In the ipv6 network, run the following command:

$ ifconfig s10hssi0 up

Will cause the machine to crash:

[ 961.346621] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 961.346651] PGD 0 P4D 0
[ 961.346661] Oops: 0010 [#1] SMP NOPTI
[ 961.346673] CPU: 62 PID: 0 Comm: swapper/62 Kdump: loaded Tainted: G OE --------- - -
[ 961.346702] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.1.8 05/21/2019
[ 961.346721] RIP: 0010: (null)
[ 961.346734] Code: Bad RIP value.
[ 961.346745] RSP: 0018:ffff98ce7fb83bd0 EFLAGS: 00010286
[ 961.346760] RAX: 0000000000000000 RBX: ffff988e7fff6000 RCX: ffff98ce7fb83c4c
[ 961.346778] RDX: ffffffffc0479620 RSI: ffff988e7fff6000 RDI: ffff98ce7e3ce900
[ 961.346796] RBP: 00000000ee0f0000 R08: 0000000000000000 R09: 000000000000004c
[ 961.346815] R10: ffff988e7cd9e540 R11: 0000000000000000 R12: 0000000000000000
[ 961.346833] R13: ffff985d88f61000 R14: ffff988e6975ce00 R15: ffff98ce7e3ce900
[ 961.346851] FS: 0000000000000000(0000) GS:ffff98ce7fb80000(0000) knlGS:0000000000000000
[ 961.346871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 961.346887] CR2: ffffffffffffffd6 CR3: 0000000e8880a006 CR4: 00000000007606e0
[ 961.346905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 961.346924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 961.346943] PKRU: 55555554
[ 961.346953] Call Trace:
[ 961.346964]
[ 961.346979] ? dev_hard_start_xmit+0xa5/0x210
[ 961.346994] ? __dev_queue_xmit+0x6c1/0x9e0
[ 961.347008] ? __neigh_create+0x427/0x580
[ 961.347023] ? ip6_finish_output2+0x1b9/0x5b0
[ 961.347039] ? kmem_cache_alloc+0x18e/0x1c0
[ 961.347053] ? kmem_cache_alloc_trace+0x3f/0x1d0
[ 961.347068] ? ip6_output+0x68/0x110
[ 961.347083] ? mld_sendpack+0x168/0x280
[ 961.347096] ? add_grhead.isra.26+0x2e/0xa0
[ 961.347110] ? mld_ifc_timer_expire+0x198/0x2d0
[ 961.347125] ? mld_clear_delrec+0xf0/0xf0
[ 961.347142] ? call_timer_fn+0x2b/0x130
[ 961.347154] ? run_timer_softirq+0x3d1/0x410
[ 961.347168] ? enqueue_hrtimer+0x38/0x90
[ 961.347182] ? __hrtimer_run_queues+0x130/0x280
[ 961.347198] ? __do_softirq+0xe3/0x30a
[ 961.347211] ? ktime_get+0x36/0xa0
[ 961.347225] ? irq_exit+0x100/0x110
[ 961.347237] ? smp_apic_timer_interrupt+0x74/0x140
[ 961.347252] ? apic_timer_interrupt+0xf/0x20
[ 961.347264]
[ 961.347275] ? mwait_idle+0x7d/0x160
[ 961.347764] ? do_idle+0x1f1/0x280
[ 961.348207] ? cpu_startup_entry+0x6f/0x80
[ 961.348649] ? start_secondary+0x1a7/0x200
[ 961.349081] ? secondary_startup_64+0xb7/0xc0

Signed-off-by: Chen Guanqiao [email protected]

fpgamatt

Thanks for the pull request. We will accept this patch, but we have some internal processes for accepting this patch. It will be merged and publicly available in a week or less.

trixirt

Guessing, crash happens here
static inline netdev_tx_t __netdev_start_xmit(const struct net_device_ops *ops,
struct sk_buff *skb, struct net_device *dev,
bool more)
{
__this_cpu_write(softnet_data.xmit.more, more);
return ops->ndo_start_xmit(skb, dev);
}
because ndo_start_xmit is empty.

The current function looks like the black hole netdev.
I would expect the function to be more like
static netdev_tx_t netdev_start_xmit(...)
{
return NETDEV_TX_OK;
}

v2: Simplife the implementation of ndo_start_xmit(). v1: This patch simply fills ndo_start_xmit() in netdev and no other operations. In the ipv6 network, after the date is sent, the netdev ndo_start_xmit() hook will be called. But s10ssi does not fill the ndo_start_xmit() in netdev, so it will case a "NULL pointer" crash. In the ipv6 network, run the following command: $ ifconfig s10hssi0 up Will cause the machine to crash: [ 961.346621] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 961.346651] PGD 0 P4D 0 [ 961.346661] Oops: 0010 [OFS#1] SMP NOPTI [ 961.346673] CPU: 62 PID: 0 Comm: swapper/62 Kdump: loaded Tainted: G OE --------- - - [ 961.346702] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.1.8 05/21/2019 [ 961.346721] RIP: 0010: (null) [ 961.346734] Code: Bad RIP value. [ 961.346745] RSP: 0018:ffff98ce7fb83bd0 EFLAGS: 00010286 [ 961.346760] RAX: 0000000000000000 RBX: ffff988e7fff6000 RCX: ffff98ce7fb83c4c [ 961.346778] RDX: ffffffffc0479620 RSI: ffff988e7fff6000 RDI: ffff98ce7e3ce900 [ 961.346796] RBP: 00000000ee0f0000 R08: 0000000000000000 R09: 000000000000004c [ 961.346815] R10: ffff988e7cd9e540 R11: 0000000000000000 R12: 0000000000000000 [ 961.346833] R13: ffff985d88f61000 R14: ffff988e6975ce00 R15: ffff98ce7e3ce900 [ 961.346851] FS: 0000000000000000(0000) GS:ffff98ce7fb80000(0000) knlGS:0000000000000000 [ 961.346871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 961.346887] CR2: ffffffffffffffd6 CR3: 0000000e8880a006 CR4: 00000000007606e0 [ 961.346905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 961.346924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 961.346943] PKRU: 55555554 [ 961.346953] Call Trace: [ 961.346964] <IRQ> [ 961.346979] ? dev_hard_start_xmit+0xa5/0x210 [ 961.346994] ? __dev_queue_xmit+0x6c1/0x9e0 [ 961.347008] ? __neigh_create+0x427/0x580 [ 961.347023] ? ip6_finish_output2+0x1b9/0x5b0 [ 961.347039] ? kmem_cache_alloc+0x18e/0x1c0 [ 961.347053] ? kmem_cache_alloc_trace+0x3f/0x1d0 [ 961.347068] ? ip6_output+0x68/0x110 [ 961.347083] ? mld_sendpack+0x168/0x280 [ 961.347096] ? add_grhead.isra.26+0x2e/0xa0 [ 961.347110] ? mld_ifc_timer_expire+0x198/0x2d0 [ 961.347125] ? mld_clear_delrec+0xf0/0xf0 [ 961.347142] ? call_timer_fn+0x2b/0x130 [ 961.347154] ? run_timer_softirq+0x3d1/0x410 [ 961.347168] ? enqueue_hrtimer+0x38/0x90 [ 961.347182] ? __hrtimer_run_queues+0x130/0x280 [ 961.347198] ? __do_softirq+0xe3/0x30a [ 961.347211] ? ktime_get+0x36/0xa0 [ 961.347225] ? irq_exit+0x100/0x110 [ 961.347237] ? smp_apic_timer_interrupt+0x74/0x140 [ 961.347252] ? apic_timer_interrupt+0xf/0x20 [ 961.347264] </IRQ> [ 961.347275] ? mwait_idle+0x7d/0x160 [ 961.347764] ? do_idle+0x1f1/0x280 [ 961.348207] ? cpu_startup_entry+0x6f/0x80 [ 961.348649] ? start_secondary+0x1a7/0x200 [ 961.349081] ? secondary_startup_64+0xb7/0xc0 Signed-off-by: Chen Guanqiao <[email protected]>

chenquanquan · 2021-03-29T06:33:25Z

Guessing, crash happens here
static inline netdev_tx_t __netdev_start_xmit(const struct net_device_ops *ops,
struct sk_buff *skb, struct net_device *dev,
bool more)
{
__this_cpu_write(softnet_data.xmit.more, more);
return ops->ndo_start_xmit(skb, dev);
}
because ndo_start_xmit is empty.

The current function looks like the black hole netdev.
I would expect the function to be more like
static netdev_tx_t netdev_start_xmit(...)
{
return NETDEV_TX_OK;
}

This function is just a fake trans.

In the new patch, remove the operation of free skb, And observer wherther there is a memleak in future test.

fpgamatt · 2021-03-29T17:23:29Z

Hi Tom, I believe the dummy ndo_start_xmit must free the sk_buff. Typically a “normal” driver would put the sk_buff on a descriptor ring, and the sk_buff would be freed when the transmit has been complete. Matthew From: trixirt ***@***.***> Sent: Saturday, March 27, 2021 8:48 AM To: OPAE/linux-dfl ***@***.***> Cc: Gerlach, Matthew ***@***.***>; Comment ***@***.***> Subject: Re: [OPAE/linux-dfl] net: ethernet: s10hssi: fix the crash in the ipv6 network (#6) @trixirt requested changes on this pull request. Guessing, crash happens here static inline netdev_tx_t __netdev_start_xmit(const struct net_device_ops *ops, struct sk_buff *skb, struct net_device *dev, bool more) { __this_cpu_write(softnet_data.xmit.more, more); return ops->ndo_start_xmit(skb, dev); } because ndo_start_xmit is empty. The current function looks like the black hole netdev. I would expect the function to be more like static netdev_tx_t netdev_start_xmit(...) { return NETDEV_TX_OK; } — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#6 (review)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AONP3AA5KYVGLKO57ZTAYX3TFX44TANCNFSM4ZWOCRQA>.

[ Upstream commit d65614a ] I met below warning when cating a small size(about 80bytes) txt file on 9pfs(msize=2097152 is passed to 9p mount option), the reason is we miss iov_iter_advance() if the read count is 0 for zerocopy case, so we didn't truncate the pipe, then iov_iter_pipe() thinks the pipe is full. Fix it by removing the exception for 0 to ensure to call iov_iter_advance() even on empty read for zerocopy case. [ 8.279568] WARNING: CPU: 0 PID: 39 at lib/iov_iter.c:1203 iov_iter_pipe+0x31/0x40 [ 8.280028] Modules linked in: [ 8.280561] CPU: 0 PID: 39 Comm: cat Not tainted 5.11.0+ #6 [ 8.281260] RIP: 0010:iov_iter_pipe+0x31/0x40 [ 8.281974] Code: 2b 42 54 39 42 5c 76 22 c7 07 20 00 00 00 48 89 57 18 8b 42 50 48 c7 47 08 b [ 8.283169] RSP: 0018:ffff888000cbbd80 EFLAGS: 00000246 [ 8.283512] RAX: 0000000000000010 RBX: ffff888000117d00 RCX: 0000000000000000 [ 8.283876] RDX: ffff88800031d600 RSI: 0000000000000000 RDI: ffff888000cbbd90 [ 8.284244] RBP: ffff888000cbbe38 R08: 0000000000000000 R09: ffff8880008d2058 [ 8.284605] R10: 0000000000000002 R11: ffff888000375510 R12: 0000000000000050 [ 8.284964] R13: ffff888000cbbe80 R14: 0000000000000050 R15: ffff88800031d600 [ 8.285439] FS: 00007f24fd8af600(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 8.285844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.286150] CR2: 00007f24fd7d7b90 CR3: 0000000000c97000 CR4: 00000000000406b0 [ 8.286710] Call Trace: [ 8.288279] generic_file_splice_read+0x31/0x1a0 [ 8.289273] ? do_splice_to+0x2f/0x90 [ 8.289511] splice_direct_to_actor+0xcc/0x220 [ 8.289788] ? pipe_to_sendpage+0xa0/0xa0 [ 8.290052] do_splice_direct+0x8b/0xd0 [ 8.290314] do_sendfile+0x1ad/0x470 [ 8.290576] do_syscall_64+0x2d/0x40 [ 8.290818] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.291409] RIP: 0033:0x7f24fd7dca0a [ 8.292511] Code: c3 0f 1f 80 00 00 00 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 8 [ 8.293360] RSP: 002b:00007ffc20932818 EFLAGS: 00000206 ORIG_RAX: 0000000000000028 [ 8.293800] RAX: ffffffffffffffda RBX: 0000000001000000 RCX: 00007f24fd7dca0a [ 8.294153] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001 [ 8.294504] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 8.294867] R10: 0000000001000000 R11: 0000000000000206 R12: 0000000000000003 [ 8.295217] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 [ 8.295782] ---[ end trace 63317af81b3ca24b ]--- Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 829933e ] For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/[email protected]/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) <[email protected]> Signed-off-by: Zheyu Ma <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Stefan Richter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 90bd070 upstream. The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [[email protected]: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

trixirt · 2021-05-05T18:55:56Z

Looks like change is in with
cca5129 net: ethernet: s10hssi: fix the crash in the ipv6 network

[ Upstream commit bbd6f0a ] In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@us

Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Yang Shi <[email protected]> Acked-by: Mel Gorman <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Zi Yan <[email protected]> Cc: Huang Ying <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Christian Borntraeger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

ASan reports a memory leak caused by evlist not being deleted on exit in perf-report, perf-script and perf-data. The problem is caused by evlist->session not being deleted, which is allocated in perf_session__read_header, called in perf_session__new if perf_data is in read mode. In case of write mode, the session->evlist is filled by the caller. This patch solves the problem by calling evlist__delete in perf_session__delete if perf_data is in read mode. Changes in v2: - call evlist__delete from within perf_session__delete v1: https://lore.kernel.org/lkml/[email protected]/ ASan report follows: $ ./perf script report flamegraph ================================================================= ==227640==ERROR: LeakSanitizer: detected memory leaks <SNIP unrelated> Indirect leak of 2704 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26 #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 568 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24 #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9 #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 264 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23 #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21 #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14 #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 7 byte(s) in 1 object(s) allocated from: #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207) #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16 #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3 #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9 #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9 #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2 #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s). Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

commit 67069a1 upstream. ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Hanjun Guo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 41d5854 upstream. I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Hanjun Guo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 57f0ff0 upstream. It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b892 ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>

If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ #757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ #757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/[email protected] [1] Signed-off-by: Tetsuo Handa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/[email protected] Fixes: 997c136 ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand <[email protected]> Acked-by: Baoquan He <[email protected]> Cc: Dave Young <[email protected]> Cc: Baoquan He <[email protected]> Cc: Vivek Goyal <[email protected]> Cc: Philipp Rudo <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

commit e6e22e6 upstream. System crash was seen when I/O was run against an NVMe target and aborts were occurring. Crash stack is: -- relevant crash stack -- BUG: kernel NULL pointer dereference, address: 0000000000000010 : #6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e [exception RIP: qla_nvme_abort_work+339] RIP: ffffffffc0f592e3 RSP: ffffae1f8666be80 RFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff9b581fc8af80 RCX: ffffffffc0f83bd0 RDX: 0000000000000001 RSI: ffff9b5839c6c7c8 RDI: 0000000008000000 RBP: ffff9b6832f85000 R8: ffffffffc0f68160 R9: ffffffffc0f70652 R10: ffffae1f862ffdc8 R11: 0000000000000300 R12: 000000000000010d R13: 0000000000000000 R14: ffff9b5839cea000 R15: 0ffff9b583fab170 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184 #8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d #9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed The crash was due to a stale SRB structure access after it was aborted. Fix the issue by removing stale access. Link: https://lore.kernel.org/r/[email protected] Fixes: 2cabf10 ("scsi: qla2xxx: Fix hang on NVMe command timeouts") Cc: [email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Arun Easi <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 5ec0a6f ] Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/[email protected] Fixes: 35f5ace ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a236 ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 2aa3660 upstream. It is generally unsafe to call put_device() with dpm_list_mtx held, because the given device's release routine may carry out an action depending on that lock which then may deadlock, so modify the system-wide suspend and resume of devices to always drop dpm_list_mtx before calling put_device() (and adjust white space somewhat while at it). For instance, this prevents the following splat from showing up in the kernel log after a system resume in certain configurations: [ 3290.969514] ====================================================== [ 3290.969517] WARNING: possible circular locking dependency detected [ 3290.969519] 5.15.0+ #2420 Tainted: G S [ 3290.969523] ------------------------------------------------------ [ 3290.969525] systemd-sleep/4553 is trying to acquire lock: [ 3290.969529] ffff888117ab1138 ((wq_completion)hci0#2){+.+.}-{0:0}, at: flush_workqueue+0x87/0x4a0 [ 3290.969554] but task is already holding lock: [ 3290.969556] ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.969571] which lock already depends on the new lock. [ 3290.969573] the existing dependency chain (in reverse order) is: [ 3290.969575] -> #3 (dpm_list_mtx){+.+.}-{3:3}: [ 3290.969583] __mutex_lock+0x9d/0xa30 [ 3290.969591] device_pm_add+0x2e/0xe0 [ 3290.969597] device_add+0x4d5/0x8f0 [ 3290.969605] hci_conn_add_sysfs+0x43/0xb0 [bluetooth] [ 3290.969689] hci_conn_complete_evt.isra.71+0x124/0x750 [bluetooth] [ 3290.969747] hci_event_packet+0xd6c/0x28a0 [bluetooth] [ 3290.969798] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969842] process_one_work+0x2aa/0x650 [ 3290.969851] worker_thread+0x39/0x400 [ 3290.969859] kthread+0x142/0x170 [ 3290.969865] ret_from_fork+0x22/0x30 [ 3290.969872] -> #2 (&hdev->lock){+.+.}-{3:3}: [ 3290.969881] __mutex_lock+0x9d/0xa30 [ 3290.969887] hci_event_packet+0xba/0x28a0 [bluetooth] [ 3290.969935] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969978] process_one_work+0x2aa/0x650 [ 3290.969985] worker_thread+0x39/0x400 [ 3290.969993] kthread+0x142/0x170 [ 3290.969999] ret_from_fork+0x22/0x30 [ 3290.970004] -> #1 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}: [ 3290.970013] process_one_work+0x27d/0x650 [ 3290.970020] worker_thread+0x39/0x400 [ 3290.970028] kthread+0x142/0x170 [ 3290.970033] ret_from_fork+0x22/0x30 [ 3290.970038] -> #0 ((wq_completion)hci0#2){+.+.}-{0:0}: [ 3290.970047] __lock_acquire+0x15cb/0x1b50 [ 3290.970054] lock_acquire+0x26c/0x300 [ 3290.970059] flush_workqueue+0xae/0x4a0 [ 3290.970066] drain_workqueue+0xa1/0x130 [ 3290.970073] destroy_workqueue+0x34/0x1f0 [ 3290.970081] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970130] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970195] device_release+0x33/0x90 [ 3290.970201] kobject_release+0x63/0x160 [ 3290.970211] dpm_resume+0x164/0x3e0 [ 3290.970215] dpm_resume_end+0xd/0x20 [ 3290.970220] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970229] pm_suspend+0x26b/0x310 [ 3290.970236] state_store+0x42/0x90 [ 3290.970243] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970251] new_sync_write+0x125/0x1c0 [ 3290.970257] vfs_write+0x360/0x3c0 [ 3290.970263] ksys_write+0xa7/0xe0 [ 3290.970269] do_syscall_64+0x3a/0x80 [ 3290.970276] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970284] other info that might help us debug this: [ 3290.970285] Chain exists of: (wq_completion)hci0#2 --> &hdev->lock --> dpm_list_mtx [ 3290.970297] Possible unsafe locking scenario: [ 3290.970299] CPU0 CPU1 [ 3290.970300] ---- ---- [ 3290.970302] lock(dpm_list_mtx); [ 3290.970306] lock(&hdev->lock); [ 3290.970310] lock(dpm_list_mtx); [ 3290.970314] lock((wq_completion)hci0#2); [ 3290.970319] *** DEADLOCK *** [ 3290.970321] 7 locks held by systemd-sleep/4553: [ 3290.970325] #0: ffff888103bcd448 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xa7/0xe0 [ 3290.970341] #1: ffff888115a14488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x103/0x1b0 [ 3290.970355] #2: ffff888100f719e0 (kn->active#233){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x10c/0x1b0 [ 3290.970369] #3: ffffffff82661048 (autosleep_lock){+.+.}-{3:3}, at: state_store+0x12/0x90 [ 3290.970384] #4: ffffffff82658ac8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9f/0x310 [ 3290.970399] #5: ffffffff827f2a48 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x4c/0x80 [ 3290.970416] #6: ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.970428] stack backtrace: [ 3290.970431] CPU: 3 PID: 4553 Comm: systemd-sleep Tainted: G S 5.15.0+ #2420 [ 3290.970438] Hardware name: Dell Inc. XPS 13 9380/0RYJWW, BIOS 1.5.0 06/03/2019 [ 3290.970441] Call Trace: [ 3290.970446] dump_stack_lvl+0x44/0x57 [ 3290.970454] check_noncircular+0x105/0x120 [ 3290.970468] ? __lock_acquire+0x15cb/0x1b50 [ 3290.970474] __lock_acquire+0x15cb/0x1b50 [ 3290.970487] lock_acquire+0x26c/0x300 [ 3290.970493] ? flush_workqueue+0x87/0x4a0 [ 3290.970503] ? __raw_spin_lock_init+0x3b/0x60 [ 3290.970510] ? lockdep_init_map_type+0x58/0x240 [ 3290.970519] flush_workqueue+0xae/0x4a0 [ 3290.970526] ? flush_workqueue+0x87/0x4a0 [ 3290.970544] ? drain_workqueue+0xa1/0x130 [ 3290.970552] drain_workqueue+0xa1/0x130 [ 3290.970561] destroy_workqueue+0x34/0x1f0 [ 3290.970572] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970624] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970687] device_release+0x33/0x90 [ 3290.970695] kobject_release+0x63/0x160 [ 3290.970705] dpm_resume+0x164/0x3e0 [ 3290.970710] ? dpm_resume_early+0x251/0x3b0 [ 3290.970718] dpm_resume_end+0xd/0x20 [ 3290.970723] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970737] pm_suspend+0x26b/0x310 [ 3290.970746] state_store+0x42/0x90 [ 3290.970755] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970764] new_sync_write+0x125/0x1c0 [ 3290.970777] vfs_write+0x360/0x3c0 [ 3290.970785] ksys_write+0xa7/0xe0 [ 3290.970794] do_syscall_64+0x3a/0x80 [ 3290.970803] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970811] RIP: 0033:0x7f41b1328164 [ 3290.970819] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 4a d2 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [ 3290.970824] RSP: 002b:00007ffe6ae21b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3290.970831] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f41b1328164 [ 3290.970836] RDX: 0000000000000004 RSI: 000055965e651070 RDI: 0000000000000004 [ 3290.970839] RBP: 000055965e651070 R08: 000055965e64f390 R09: 00007f41b1e3d1c0 [ 3290.970843] R10: 000000000000000a R11: 0000000000000246 R12: 0000000000000004 [ 3290.970846] R13: 0000000000000001 R14: 000055965e64f2b0 R15: 0000000000000004 Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c1e6311 upstream. To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/[email protected] Fixes: 997c136 ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand <[email protected]> Acked-by: Baoquan He <[email protected]> Cc: Dave Young <[email protected]> Cc: Baoquan He <[email protected]> Cc: Vivek Goyal <[email protected]> Cc: Philipp Rudo <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0c8e32f upstream. The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c271a55 upstream. The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae0389 ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2efc225 ] In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] Fixes: 3d5048c ("net: marvell: prestera: move netdev topology validation to prestera_main") Signed-off-by: Yevhen Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] Fixes: 3d5048c ("net: marvell: prestera: move netdev topology validation to prestera_main") Signed-off-by: Yevhen Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

[ Upstream commit e19c627 ] The offset addition could overflow and pass the used size check given an attribute with very large size (e.g., 0xffffff7f) while parsing MFT attributes. This could lead to out-of-bound memory R/W if we try to access the next attribute derived by Add2Ptr(attr, asize) [ 32.963847] BUG: unable to handle page fault for address: ffff956a83c76067 [ 32.964301] #PF: supervisor read access in kernel mode [ 32.964526] #PF: error_code(0x0000) - not-present page [ 32.964893] PGD 4dc01067 P4D 4dc01067 PUD 0 [ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6 [ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110 [ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a [ 32.968101] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283 [ 32.968364] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f [ 32.968651] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8 [ 32.968963] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f [ 32.969249] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000 [ 32.969870] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170 [ 32.970655] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000 [ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.971378] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0 [ 32.972098] Call Trace: [ 32.972842] <TASK> [ 32.973341] ni_enum_attr_ex+0xda/0xf0 [ 32.974087] ntfs_iget5+0x1db/0xde0 [ 32.974386] ? slab_post_alloc_hook+0x53/0x270 [ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0 [ 32.975115] ntfs_fill_super+0x5d6/0x12a0 [ 32.975336] get_tree_bdev+0x175/0x270 [ 32.975709] ? put_ntfs+0x150/0x150 [ 32.975956] ntfs_fs_get_tree+0x15/0x20 [ 32.976191] vfs_get_tree+0x2a/0xc0 [ 32.976374] ? capable+0x19/0x20 [ 32.976572] path_mount+0x484/0xaa0 [ 32.977025] ? putname+0x57/0x70 [ 32.977380] do_mount+0x80/0xa0 [ 32.977555] __x64_sys_mount+0x8b/0xe0 [ 32.978105] do_syscall_64+0x3b/0x90 [ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 32.979311] RIP: 0033:0x7fdab72e948a [ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 32.981251] RSP: 002b:00007ffd15b87588 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 32.981832] RAX: ffffffffffffffda RBX: 0000557de0aaf060 RCX: 00007fdab72e948a [ 32.982234] RDX: 0000557de0aaf260 RSI: 0000557de0aaf2e0 RDI: 0000557de0ab7ce0 [ 32.982714] RBP: 0000000000000000 R08: 0000557de0aaf280 R09: 0000000000000020 [ 32.983046] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000557de0ab7ce0 [ 32.983494] R13: 0000557de0aaf260 R14: 0000000000000000 R15: 00000000ffffffff [ 32.984094] </TASK> [ 32.984352] Modules linked in: [ 32.984753] CR2: ffff956a83c76067 [ 32.985911] ---[ end trace 0000000000000000 ]--- [ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110 [ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a [ 32.988232] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283 [ 32.988532] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f [ 32.988916] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8 [ 32.989356] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f [ 32.989994] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000 [ 32.990415] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170 [ 32.991011] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000 [ 32.991524] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.991936] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0 This patch adds an overflow check Signed-off-by: edward lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b18cba0 ] Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] #6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] #7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] #8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] #9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <[email protected]> Signed-off-by: Hiroshi Shimamoto <[email protected]> Tested-by: Hiroshi Shimamoto <[email protected]> Cc: Trond Myklebust <[email protected]> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 704f338 upstream. Check carefully on root debugfs available when destroying vgpu, e.g in remove case drm minor's debugfs root might already be destroyed, which led to kernel oops like below. Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14 BUG: kernel NULL pointer dereference, address: 0000000000000150 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6 Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022 RIP: 0010:__lock_acquire+0x5e2/0x1f90 Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0 RSP: 0018:ffff9f770274f948 EFLAGS: 00010046 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire+0xbf/0x2b0 ? simple_recursive_removal+0xa5/0x2b0 ? lock_release+0x13d/0x2d0 down_write+0x2a/0xd0 ? simple_recursive_removal+0xa5/0x2b0 simple_recursive_removal+0xa5/0x2b0 ? start_creating.part.0+0x110/0x110 ? _raw_spin_unlock+0x29/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt] intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt] intel_vgpu_release_dev+0xe/0x20 [kvmgt] device_release+0x30/0x80 kobject_put+0x79/0x1b0 device_release_driver_internal+0x1b8/0x230 bus_remove_device+0xec/0x160 device_del+0x189/0x400 ? up_write+0x9c/0x1b0 ? mdev_device_remove_common+0x60/0x60 [mdev] mdev_device_remove_common+0x22/0x60 [mdev] mdev_device_remove_cb+0x17/0x20 [mdev] device_for_each_child+0x56/0x80 mdev_unregister_parent+0x5a/0x81 [mdev] intel_gvt_clean_device+0x2d/0xe0 [kvmgt] intel_gvt_driver_remove+0x2e/0xb0 [i915] i915_driver_remove+0xac/0x100 [i915] i915_pci_remove+0x1a/0x30 [i915] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x1b8/0x230 unbind_store+0xd8/0x100 kernfs_fop_write_iter+0x156/0x210 vfs_write+0x236/0x4a0 ksys_write+0x61/0xd0 do_syscall_64+0x55/0x80 ? find_held_lock+0x2b/0x80 ? lock_release+0x13d/0x2d0 ? up_read+0x17/0x20 ? lock_is_held_type+0xe3/0x140 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fc9b2c9e0c4 Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4 RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001 RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30 R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00 </TASK> Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm_multipath kvmgt mdev vfio_iommu_type1 vfio kvm irqbypass i915 nvme e1000e igb nvme_core crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic serio_raw ghash_clmulni_intel sha512_ssse3 dca drm_buddy intel_gtt video wmi drm_display_helper ttm CR2: 0000000000000150 ---[ end trace 0000000000000000 ]--- Cc: Wang Zhi <[email protected]> Cc: He Yu <[email protected]> Cc: Alex Williamson <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Tested-by: Yu He <[email protected]> Fixes: bc7b0be ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c6ec929 upstream. In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Carlos Llamas <[email protected]> Cc: [email protected] Signed-off-by: Maciej Żenczykowski <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6c4ca03 ] During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Carlos Llamas <[email protected]> Cc: [email protected] Signed-off-by: Maciej Żenczykowski <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

[ Upstream commit e40b801 ] There is a certain chance to trigger the following panic: PID: 5900 TASK: ffff88c1c8af4100 CPU: 1 COMMAND: "kworker/1:48" #0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7 #1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a #2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60 #3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7 #4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715 #5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654 #6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62 [exception RIP: ib_alloc_mr+19] RIP: ffffffffc0c9cce3 RSP: ffff9456c1cc7c38 RFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000004 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88c1ea281d00 R8: 000000020a34ffff R9: ffff88c1350bbb20 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000010 R14: ffff88c1ab040a50 R15: ffff88c1ea281d00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc] #8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc] #9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc] The reason here is that when the server tries to create a second link, smc_llc_srv_add_link() has no protection and may add a new link to link group. This breaks the security environment protected by llc_conf_mutex. Fixes: 2d2209f ("net/smc: first part of add link processing as SMC server") Signed-off-by: D. Wythe <[email protected]> Reviewed-by: Larysa Zaremba <[email protected]> Reviewed-by: Wenjia Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 91621be ] When --overwrite and --max-size options of perf record are used together, a segmentation fault occurs. The following is an example: # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1 [ perf record: Woken up 1 times to write data ] perf: Segmentation fault Obtained 12 stack frames. ./perf/perf(+0x197673) [0x55f99710b673] /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f] ./perf/perf(+0x8eb40) [0x55f997002b40] ./perf/perf(+0x1f6882) [0x55f99716a882] ./perf/perf(+0x794c2) [0x55f996fed4c2] ./perf/perf(+0x7b7c7) [0x55f996fef7c7] ./perf/perf(+0x9074b) [0x55f99700474b] ./perf/perf(+0x12e23c) [0x55f9970a223c] ./perf/perf(+0x12e54a) [0x55f9970a254a] ./perf/perf(+0x7db60) [0x55f996ff1b60] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86] ./perf/perf(+0x7dfe9) [0x55f996ff1fe9] Segmentation fault (core dumped) backtrace of the core file is as follows: (gdb) bt #0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234 #1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242 #2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263 #3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618 #4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658, from=from@entry=0) at util/synthetic-events.c:1895 #5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658) at util/synthetic-events.c:1905 #6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997 #7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802 #8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258 #9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330 #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384 #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428 #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562 The reason is that record__bytes_written accesses the freed memory rec->thread_data, The process is as follows: __cmd_record -> record__free_thread_data -> zfree(&rec->thread_data) // free rec->thread_data -> record__synthesize -> perf_event__synthesize_id_index -> process_synthesized_event -> record__write -> record__bytes_written // access rec->thread_data We add a member variable "thread_bytes_written" in the struct "record" to save the data size written by the threads. Fixes: 6d57581 ("perf record: Add support for limit perf output file size") Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiwei Sun <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 950b43f ] When the interface is brought up in monitor mode, it leads to NULL pointer dereference crash. This crash happens when the packet type is extracted for a SKB. This extraction which is present in the received msdu delivery path,is not needed for the monitor ring packets since they are all RAW packets. Hence appending the flags with "RX_FLAG_ONLY_MONITOR" to skip that extraction. Observed calltrace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000064 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000 [0000000000000064] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ath11k_pci ath11k qmi_helpers CPU: 2 PID: 1781 Comm: napi/-271 Not tainted 6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6 Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k] sp : ffff80000ef5bb10 x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0 x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000 x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600 x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006 x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143 x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8 x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052 Call trace: ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k] ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k] ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k] ath11k_dp_service_srng+0x234/0x338 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k] __napi_poll+0x5c/0x190 napi_threaded_poll+0xf0/0x118 kthread+0xf4/0x110 ret_from_fork+0x10/0x20 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Reported-by: Florian Schmidt <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216573 Signed-off-by: Nagarajan Maran <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit 60eed1e upstream. code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Heming Zhao <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b6985b9 ] Backports notes: one simple conflict in net/mptcp/protocol.c with: commit a5ef058 ("net: introduce and use custom sockopt socket flag") Where the two commits add a new line for different actions in the same context in mptcp_stream_accept(). Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization Fixes: 58b0991 ("mptcp: create msk early") Cc: [email protected] Reported-and-tested-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#347 Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0a3f4f1 ] Backports notes: one simple conflict in net/mptcp/protocol.c with: commit f8c9dfb ("mptcp: add pm listener events") Where one commit removes code in __mptcp_close_ssk() while the other one adds one line at the same place. We can simply remove the whole condition because this extra instruction is not present in v6.1. As reported by Christoph after having refactored the passive socket initialization, the mptcp listener shutdown path is prone to an UaF issue. BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0 Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266 CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 kasan_check_range+0x14a/0x1a0 _raw_spin_lock_bh+0x73/0xe0 subflow_error_report+0x6d/0x110 sk_error_report+0x3b/0x190 tcp_disconnect+0x138c/0x1aa0 inet_child_forget+0x6f/0x2e0 inet_csk_listen_stop+0x209/0x1060 __mptcp_close_ssk+0x52d/0x610 mptcp_destroy_common+0x165/0x640 mptcp_destroy+0x13/0x80 __mptcp_destroy_sock+0xe7/0x270 __mptcp_close+0x70e/0x9b0 mptcp_close+0x2b/0x150 inet_release+0xe9/0x1f0 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The msk grace period can legitly expire in between the last reference count dropped in mptcp_subflow_queue_clean() and the later eventual access in inet_csk_listen_stop() After the previous patch we don't need anymore special-casing msk listener socket cleanup: the mptcp worker will process each of the unaccepted msk sockets. Just drop the now unnecessary code. Please note this commit depends on the two parent ones: mptcp: refactor passive socket initialization mptcp: use the workqueue to destroy unaccepted sockets Fixes: 6aeed90 ("mptcp: fix race on unaccepted mptcp sockets") Cc: [email protected] Reported-and-tested-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#346 Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 7ff8491 upstream. Commit 6930bcb dropped the setting of the file_lock range when decoding a nlm_lock off the wire. This causes the client side grant callback to miss matching blocks and reject the lock, only to rerequest it 30s later. Add a helper function to set the file_lock range from the start and end values that the protocol uses, and have the nlm_lock decoder call that to set up the file_lock args properly. Fixes: 6930bcb ("lockd: detect and reject lock arguments that overflow") Reported-by: Amir Goldstein <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Tested-by: Amir Goldstein <[email protected]> Cc: [email protected] #6.0 Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ef6e199 ] In the function ieee80211_tx_dequeue() there is a particular locking sequence: begin: spin_lock(&local->queue_stop_reason_lock); q_stopped = local->queue_stop_reasons[q]; spin_unlock(&local->queue_stop_reason_lock); However small the chance (increased by ftracetest), an asynchronous interrupt can occur in between of spin_lock() and spin_unlock(), and the interrupt routine will attempt to lock the same &local->queue_stop_reason_lock again. This will cause a costly reset of the CPU and the wifi device or an altogether hang in the single CPU and single core scenario. The only remaining spin_lock(&local->queue_stop_reason_lock) that did not disable interrupts was patched, which should prevent any deadlocks on the same CPU/core and the same wifi device. This is the probable trace of the deadlock: kernel: ================================ kernel: WARNING: inconsistent lock state kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G W kernel: -------------------------------- kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes: kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40 kernel: {IN-SOFTIRQ-W} state was registered at: kernel: lock_acquire+0xc7/0x2d0 kernel: _raw_spin_lock+0x36/0x50 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm] kernel: ieee80211_queue_skb+0x450/0x730 [mac80211] kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211] kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211] kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211] kernel: dev_hard_start_xmit+0xb5/0x260 kernel: __dev_queue_xmit+0xdbe/0x1200 kernel: neigh_resolve_output+0x166/0x260 kernel: ip_finish_output2+0x216/0xb80 kernel: __ip_finish_output+0x2a4/0x4d0 kernel: ip_finish_output+0x2d/0xd0 kernel: ip_output+0x82/0x2b0 kernel: ip_local_out+0xec/0x110 kernel: igmpv3_sendpack+0x5c/0x90 kernel: igmp_ifc_timer_expire+0x26e/0x4e0 kernel: call_timer_fn+0xa5/0x230 kernel: run_timer_softirq+0x27f/0x550 kernel: __do_softirq+0xb4/0x3a4 kernel: irq_exit_rcu+0x9b/0xc0 kernel: sysvec_apic_timer_interrupt+0x80/0xa0 kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30 kernel: _raw_spin_unlock_irqrestore+0x3f/0x70 kernel: free_to_partial_list+0x3d6/0x590 kernel: __slab_free+0x1b7/0x310 kernel: kmem_cache_free+0x52d/0x550 kernel: putname+0x5d/0x70 kernel: do_sys_openat2+0x1d7/0x310 kernel: do_sys_open+0x51/0x80 kernel: __x64_sys_openat+0x24/0x30 kernel: do_syscall_64+0x5c/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc kernel: irq event stamp: 5120729 kernel: hardirqs last enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120 kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120 kernel: softirqs last enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: other info that might help us debug this: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&local->queue_stop_reason_lock); kernel: <Interrupt> kernel: lock(&local->queue_stop_reason_lock); kernel: *** DEADLOCK *** kernel: 8 locks held by kworker/5:0/25656: kernel: #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530 kernel: #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530 kernel: #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #3: ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #4: ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #5: ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #6: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm] kernel: #7: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm] kernel: stack backtrace: kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G W 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022 kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211] kernel: Call Trace: kernel: <TASK> kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: dump_stack_lvl+0x5f/0xa0 kernel: dump_stack+0x14/0x20 kernel: print_usage_bug.part.46+0x208/0x2a0 kernel: mark_lock.part.47+0x605/0x630 kernel: ? sched_clock+0xd/0x20 kernel: ? trace_clock_local+0x14/0x30 kernel: ? __rb_reserve_next+0x5f/0x490 kernel: ? _raw_spin_lock+0x1b/0x50 kernel: __lock_acquire+0x464/0x1990 kernel: ? mark_held_locks+0x4e/0x80 kernel: lock_acquire+0xc7/0x2d0 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ? ftrace_return_to_handler+0x8b/0x100 kernel: ? preempt_count_add+0x4/0x70 kernel: _raw_spin_lock+0x36/0x50 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: ? prepare_ftrace_return+0xc5/0x190 kernel: ? ftrace_graph_func+0x16/0x20 kernel: ? 0xffffffffc02ab0b1 kernel: ? lock_acquire+0xc7/0x2d0 kernel: ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm] kernel: ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211] kernel: ? __rcu_read_lock+0x4/0x40 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_free+0x55/0x130 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi] kernel: ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi] kernel: ? mutex_lock_nested+0x4/0x30 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_stop_device+0x78/0xd0 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: __iwl_mvm_mac_start+0x114/0x210 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_mac_start+0x76/0x150 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: drv_start+0x79/0x180 [mac80211] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_reconfig+0x1523/0x1ce0 [mac80211] kernel: ? synchronize_net+0x4/0x50 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_restart_work+0x108/0x170 [mac80211] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: process_one_work+0x250/0x530 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: worker_thread+0x48/0x3a0 kernel: ? __pfx_worker_thread+0x10/0x10 kernel: kthread+0x10f/0x140 kernel: ? __pfx_kthread+0x10/0x10 kernel: ret_from_fork+0x29/0x50 kernel: </TASK> Fixes: 4444bc2 ("wifi: mac80211: Proper mark iTXQs for resumption") Link: https://lore.kernel.org/all/[email protected]/ Reported-by: Mirsad Goran Todorovac <[email protected]> Cc: Gregory Greenman <[email protected]> Cc: Johannes Berg <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Cc: David S. Miller <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: Alexander Wetzel <[email protected]> Signed-off-by: Mirsad Goran Todorovac <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: tag, or it goes automatically? Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ting commit b71b552 upstream. Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d5 ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Sai Krishna says: ==================== octeontx2: Miscellaneous fixes This patchset includes following fixes. Patch #1 Fix for the race condition while updating APR table Patch #2 Fix end bit position in NPC scan config Patch #3 Fix depth of CAM, MEM table entries Patch #4 Fix in increase the size of DMAC filter flows Patch #5 Fix driver crash resulting from invalid interface type information retrieved from firmware Patch #6 Fix incorrect mask used while installing filters involving fragmented packets Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction, IPV6 filed hash configuration. Patch #8 Fix for NPC hardware parser configuration destination address hash, IPV6 endianness issues. Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware. Patch #10 Fix disabling packet I/O in case of mailbox timeout. Patch #11 Fix detaching LF resources in case of VF probe fail. ==================== Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…l/git/vfs/vfs Pull misc vfs updates from Christian Brauner: "This contains the usual miscellaneous features, cleanups, and fixes for vfs and individual fses. Features: - Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That means we now have six free FMODE_* bits in total (but bit #6 already got used for FMODE_WRITE_RESTRICTED) - Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup) - Add fd_raw cleanup class so we can make use of automatic cleanup provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well - Optimize seq_puts() - Simplify __seq_puts() - Add new anon_inode_getfile_fmode() api to allow specifying f_mode instead of open-coding it in multiple places - Annotate struct file_handle with __counted_by() and use struct_size() - Warn in get_file() whether f_count resurrection from zero is attempted (epoll/drm discussion) - Folio-sophize aio - Export the subvolume id in statx() for both btrfs and bcachefs - Relax linkat(AT_EMPTY_PATH) requirements - Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors for dup*() equality replacing kcmp() Cleanups: - Compile out swapfile inode checks when swap isn't enabled - Use (1 << n) notation for FMODE_* bitshifts for clarity - Remove redundant variable assignment in fs/direct-io - Cleanup uses of strncpy in orangefs - Speed up and cleanup writeback - Move fsparam_string_empty() helper into header since it's currently open-coded in multiple places - Add kernel-doc comments to proc_create_net_data_write() - Don't needlessly read dentry->d_flags twice Fixes: - Fix out-of-range warning in nilfs2 - Fix ecryptfs overflow due to wrong encryption packet size calculation - Fix overly long line in xfs file_operations (follow-up to FMODE_* cleanup) - Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up to FMODE_* cleanup) - Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_* cleanup) - Fix stable offset api to prevent endless loops - Fix afs file server rotations - Prevent xattr node from overflowing the eraseblock in jffs2 - Move fdinfo PTRACE_MODE_READ procfs check into the .permission() operation instead of .open() operation since this caused userspace regressions" * tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits) afs: Fix fileserver rotation getting stuck selftests: add F_DUPDFD_QUERY selftests fcntl: add F_DUPFD_QUERY fcntl() file: add fd_raw cleanup class fs: WARN when f_count resurrection is attempted seq_file: Simplify __seq_puts() seq_file: Optimize seq_puts() proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation fs: Create anon_inode_getfile_fmode() xfs: don't call xfs_file_open from xfs_dir_open xfs: drop fop_flags for directories xfs: fix overly long line in the file_operations shmem: Fix shmem_rename2() libfs: Add simple_offset_rename() API libfs: Fix simple_offset_rename_exchange() jffs2: prevent xattr node from overflowing the eraseblock vfs, swap: compile out IS_SWAPFILE() on swapless configs vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements fs/direct-io: remove redundant assignment to variable retval fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading ...

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. Fixes: 7d42e09 ("crypto: qat - resolve race condition during AER recovery") Cc: <[email protected]> #6.8+ Signed-off-by: Herbert Xu <[email protected]> Reviewed-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>

On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

…ation When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda ("net: enetc: prioritize ability to go down over packet processing") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: [email protected] Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

fpgamatt reviewed Mar 24, 2021

View reviewed changes

trixirt suggested changes Mar 27, 2021

View reviewed changes

chenquanquan requested a review from trixirt March 29, 2021 03:45

chenquanquan force-pushed the fpga-ofs-dev-5.10-lts branch from 184a3a8 to 83f7bb6 Compare March 29, 2021 03:52

chenquanquan force-pushed the fpga-ofs-dev-5.10-lts branch from 83f7bb6 to 55939cb Compare March 29, 2021 06:21

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

net: ethernet: s10hssi: fix the crash in the ipv6 network #6

net: ethernet: s10hssi: fix the crash in the ipv6 network #6

chenquanquan commented Mar 24, 2021

fpgamatt left a comment

trixirt left a comment

chenquanquan commented Mar 29, 2021

fpgamatt commented Mar 29, 2021 via email

trixirt commented May 5, 2021

net: ethernet: s10hssi: fix the crash in the ipv6 network #6

Are you sure you want to change the base?

net: ethernet: s10hssi: fix the crash in the ipv6 network #6

Conversation

chenquanquan commented Mar 24, 2021

fpgamatt left a comment

Choose a reason for hiding this comment

trixirt left a comment

Choose a reason for hiding this comment

chenquanquan commented Mar 29, 2021

fpgamatt commented Mar 29, 2021 via email

trixirt commented May 5, 2021