Platform updates

Co-Authored-By: Martin Turski <[email protected]>

Marlin/src/HAL/STM32/MarlinSPI.cpp

@@ -26,7 +26,7 @@
 
 #include "MarlinSPI.h"
 
-static void spi_init(spi_t *obj, uint32_t speed, spi_mode_e mode, uint8_t msb, uint32_t dataSize) {
+static void spi_init(spi_t *obj, uint32_t speed, SPIMode mode, uint8_t msb, uint32_t dataSize) {
   spi_init(obj, speed, mode, msb);
   // spi_init set 8bit always
   // TODO: copy the code from spi_init and handle data size, to avoid double init always!!

Marlin/src/HAL/STM32/MarlinSPI.h

@@ -61,7 +61,7 @@ class MarlinSPI {
     _spi.pin_ssel = digitalPinToPinName(_ssPin);
     _dataSize = DATA_SIZE_8BIT;
     _bitOrder = MSBFIRST;
-    _dataMode = SPI_MODE_0;
+    _dataMode = SPI_MODE0;
     _spi.handle.State = HAL_SPI_STATE_RESET;
     setClockDivider(SPI_SPEED_CLOCK_DIV2_MHZ);
   }
@@ -80,10 +80,10 @@ class MarlinSPI {
 
   void setDataMode(uint8_t _mode) {
     switch (_mode) {
-      case SPI_MODE0: _dataMode = SPI_MODE_0; break;
-      case SPI_MODE1: _dataMode = SPI_MODE_1; break;
-      case SPI_MODE2: _dataMode = SPI_MODE_2; break;
-      case SPI_MODE3: _dataMode = SPI_MODE_3; break;
+      case SPI_MODE0: _dataMode = SPI_MODE0; break;
+      case SPI_MODE1: _dataMode = SPI_MODE1; break;
+      case SPI_MODE2: _dataMode = SPI_MODE2; break;
+      case SPI_MODE3: _dataMode = SPI_MODE3; break;
     }
   }
 
@@ -96,7 +96,7 @@ class MarlinSPI {
   DMA_HandleTypeDef _dmaTx;
   DMA_HandleTypeDef _dmaRx;
   BitOrder _bitOrder;
-  spi_mode_e _dataMode;
+  SPIMode _dataMode;
   uint8_t _clockDivider;
   uint32_t _speed;
   uint32_t _dataSize;

Marlin/src/HAL/STM32/pinsDebug.h

@@ -21,6 +21,10 @@
  */
 #pragma once
 
+#ifndef PINS_DEBUGGING
+  #error "PINS_DEBUGGING not defined but tried to include debug header!"
+#endif
+
 /**
  * Pins Debugging for STM32
  *
@@ -47,6 +51,9 @@
    // Only in ST's Arduino core (STM32duino, STM32Core)
    #error "Expected NUM_DIGITAL_PINS not found"
 #endif
+#ifndef NUM_ANALOG_INPUTS
+  #error "Expected NUM_ANALOG_INPUTS not found"
+#endif
 
 /**
  *  Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order)
@@ -124,10 +131,28 @@ const XrefInfo pin_xref[] PROGMEM = {
 #define PORT_NUM(P) (((P)  >> 4) & 0x0007)
 #define PORT_ALPHA(P) ('A' + ((P) >> 4))
 
-#if NUM_ANALOG_FIRST >= NUM_DIGITAL_PINS
-  #define HAS_HIGH_ANALOG_PINS 1
+/**
+ * Translation of routines & variables used by pinsDebug.h
+ */
+#ifndef __STRINGIFY
+  #define __STRINGIFY(x) #x
+#endif
+#define TOSTRING(x) __STRINGIFY(x)
+#define _STM32_PLATDEFPATH(x) TOSTRING(platdefs/x.h)
+#ifdef _STM32_PLATDEFS
+  #if __has_include(_STM32_PLATDEFPATH(_STM32_PLATDEFS))
+    #include _STM32_PLATDEFPATH(_STM32_PLATDEFS)
+  #endif
 #endif
-#ifndef NUM_ANALOG_LAST
+
+#ifndef NUM_ANALOG_FIRST
+  #warning "Preprocessor macro NUM_ANALOG_FIRST is not defined but PINS_DEBUGGING is enabled; ignoring analog pin debug functions."
+#endif
+
+#ifdef NUM_ANALOG_FIRST
+  #if NUM_ANALOG_FIRST >= NUM_DIGITAL_PINS
+    #define HAS_HIGH_ANALOG_PINS 1
+  #endif
   #define NUM_ANALOG_LAST ((NUM_ANALOG_FIRST) + (NUM_ANALOG_INPUTS) - 1)
 #endif
 #define NUMBER_PINS_TOTAL ((NUM_DIGITAL_PINS) + TERN0(HAS_HIGH_ANALOG_PINS, NUM_ANALOG_INPUTS))
@@ -186,8 +211,10 @@ bool getValidPinMode(const pin_t pin) {
 }
 
 int8_t digital_pin_to_analog_pin(const pin_t pin) {
-  if (WITHIN(pin, NUM_ANALOG_FIRST, NUM_ANALOG_LAST))
-    return pin - NUM_ANALOG_FIRST;
+  #ifdef NUM_ANALOG_FIRST
+    if (WITHIN(pin, NUM_ANALOG_FIRST, NUM_ANALOG_LAST))
+      return pin - NUM_ANALOG_FIRST;
+  #endif
 
   const int8_t ind = digitalPinToAnalogIndex(pin);
   return (ind < NUM_ANALOG_INPUTS) ? ind : -1;
@@ -225,10 +252,12 @@ void printPinPort(const pin_t pin) {
 
   // Print number to be used with M42
   int calc_p = pin;
-  if (pin > NUM_DIGITAL_PINS) {
-    calc_p -= NUM_ANALOG_FIRST;
-    if (calc_p > 7) calc_p += 8;
-  }
+  #ifdef NUM_ANALOG_FIRST
+    if (pin > NUM_DIGITAL_PINS) {
+      calc_p -= NUM_ANALOG_FIRST;
+      if (calc_p > 7) calc_p += 8;
+    }
+  #endif
   SERIAL_ECHOPGM(" M42 P", calc_p);
   SERIAL_CHAR(' ');
   if (calc_p < 100) {

Marlin/src/HAL/STM32/platdefs/MARLIN_ARTILLERY_RUBY.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        50
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_BTT002.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        35
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_E3_RRF.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        35
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_GTR_V1.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        35
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_OCTOPUS_PRO_V1_F429.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        NUM_DIGITAL_PINS
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_OCTOPUS_V1.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        NUM_DIGITAL_PINS
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BIGTREE_SKR_PRO_11.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        35
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_BTT_SKR_SE_BX.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef NUM_ANALOG_FIRST
+  #error "NUM_ANALOG_FIRST is not defined??"
+  #define NUM_ANALOG_FIRST        108
+#endif

Marlin/src/HAL/STM32/platdefs/MARLIN_F103Rx.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/STM32/platdefs/MARLIN_F103VE_LONGER.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once