#German Version below!
This project tries to use the Calliope Mini as a simulator for logic gates
There are four modes. To switch between modes press A+B
Gate-Mode: Calliope simulates logic gates:
Input: Pin 0 and 1, Output Pin 3, Ground Pin "-"
A: Switch gates, B: Negate
Switch-Mode: Calliope simulates a switch
Output: Pin 0
A: Toggle On/Off, B: Toggle Switch Style
Exit-Mode: Calliope shows, if a Signal is incoming
Input Pin 0, Ground Pin "-"
Clock Mode: Depending on the setting the clock mode sends signal "on" (digital output: 1) every 0.5, 1, or 1,5 seconds.
Output: Pin 0
A: Toggle Speed, B: Toggle Sound
Note that you must hold the button for one full cycle of the clock. (Until 1 is sent)
Shake: Reset
In diesem Projekt versuche ich den Calliope Mini als Simulator für Logikgatter zu nutzen.
Es gibt 3 Modi. Moduswechsel durch gleichzeitiges Drücken von A und B
Gatter Modus: Der Calliope simuliert Logikgatter:
Eingänge Pin 0 und 1, Ausgang Pin 3, Erdung Pin "-"
Knopf A: Gatterwechsel, Knopf B: Negation
Schaltermodus: Der Calliope dient als An-/Ausschalter:
Ausgang: Pin 0
Knopf A: Wechsel zwischen An/Aus, Knopf B: Anzeigeart ändern
Ausgangsmodus: Der Calliope zeigt an, ob ein Signal an Pin 0 eingeht
Eingang Pin 0, Erdung Pin "-"
Schütteln: Reset
Taktgebermodus: Der Calliope gibt das Signal "An" (Digitales Signal "1") jede halbe, ganze oder alle 1,5 Sekunden aus.
Ausgang: Pin 0
Knopf A: Takt ändern, Knopf B: Ton an/aus
Schütteln: Reset