Add UM simulation and change status of UCL to the simuation array.

STAGE-0/FPS-URB-RCC_STAGE-0_WRF_experiment_design.csv

@@ -14,7 +14,9 @@ CTRL_r7,CTRL,"Control simulation, realization 7",UCAN,"{'sf_sfclay_physics': 1,
 "
 CTRL_r8,CTRL,"Control simulation, realization 8",UCAN,"{'sf_sfclay_physics': 1, 'sf_urban_physics': 3, 'bl_pbl_physics': 8, 'mp_physics': 8, 'e_vert': 60}",EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid,published,"Realization r8 is an HPC sensitivity simulation performed on LUMI HPC
 "
-CTRL_r9,CTRL,"Control simulation, realization 9 performed on xxx HPC",UCL,"{'sf_sfclay_physics': 1, 'sf_urban_physics': 3, 'bl_pbl_physics': 8, 'mp_physics': 8, 'e_vert': 60}",EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid,completed,"Realization r9 is an HPC sensitivity simulation
+CTRL_r9,CTRL,"Control simulation, realization 9 performed on xxx HPC",UCL,"{'sf_sfclay_physics': 1, 'sf_urban_physics': 3, 'bl_pbl_physics': 8, 'mp_physics': 8, 'e_vert': 60}",EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid,published,"Realization r9 is an HPC sensitivity simulation
+"
+CTRL_r10,CTRL,"Control simulation, realization 10 performed on xxx HPC",UM,"{'sf_sfclay_physics': 1, 'sf_urban_physics': 3, 'bl_pbl_physics': 8, 'mp_physics': 8, 'e_vert': 60}",EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid,running,"Realization r9 is an HPC sensitivity simulation
 "
 URB0,CTRL_r3,"No urban parameterization, but with urban category in LU data",CYI,{'sf_urban_physics': 0},"As CTRL run, but urban model sitched off",published,
 PBL5,CTRL_r5,MYNN 2.5 PBL scheme,IDL-FCUL,{'bl_pbl_physics': 5},"As CTRL, but with MYNN 2.5 PBL scheme",completed,
@@ -26,12 +28,13 @@ DPAR_r2,DPAR,"DPAR simulation, realization 2",UCAN,,"As CTRL, but with default u
 "
 ALPX,CTRL_r7,Extended convection-permitting domain (I4C ALPX-3),UCAN,,"As CTRL, but with the extended convection-permitting domain (I4C ALPX-3)",published,
 CI4C,ALPX,Full configuration from I4C,UCAN,"{'sf_urban_physics': 1, 'bl_pbl_physics': 8, 'e_vert': 54}","As ALPX, but with the exact WRF configuration used in I4C",published,
-NOAC,CTRL_r9,No AC in URB3 model,UCL,,"As CTRL, but with SW_COND=0 (OFF) in URBPARM_LCZ.TBL",completed,
+NOAC,CTRL_r9,No AC in URB3 model,UCL,,"As CTRL, but with SW_COND=0 (OFF) in URBPARM_LCZ.TBL",published,
+CONV,CTRL_r10,New Grell convection scheme (G3),UM,{'cu_physics': 5},"As CTRL, but with the New Grell convection scheme (G3)",running,
+CHEM,CTRL_r10,Chemical transport model (WRF-CHEM) switched on,UM,,"As CTRL, but with chemical transport model (WRF-CHEM) on",running,
 SFAE,SFL2,Janjic MO surface layer and no aerosol climatology data,CUNI,"{'sf_sfclay_physics': 2, 'aer_opt': 0}","As SFL2, but without aerosols",published,
 SFU1,SFL2,SLUCM model,CUNI,"{'sf_sfclay_physics': 2, 'sf_urban_physics': 1}","As SFL2 run, but with SLUCM urban model, dzbot=60, TS_SCHEME=2",published,
 SFNO,SFL2,No urban model,CUNI,"{'sf_sfclay_physics': 2, 'sf_urban_physics': 0}","As SFL2 run, but without urban model",published,
 SFL2,CTRL,Janjic MO surface layer,CUNI,{'sf_sfclay_physics': 2},"As CTRL, but with Monin-Obukhov (Janjic) scheme",published,
 AER0,CTRL,No aerosol climatology data,CUNI,{'aer_opt': 0},"As CTRL, but without aerosols",published,
-CHEM,CTRL,Chemical transport model (WRF-CHEM) switched on,UM,,"As CTRL, but with chemical transport model (WRF-CHEM) on",running,
 MICR,CTRL,P3 microphysics scheme,AUTH-MC,{'mp_physics': 52},"As CTRL, but with P3 microphysics scheme",published,
 URB2,CTRL_r2,BEP model,CIMA,{'sf_urban_physics': 2},"As CTRL run, but with BEP urban model",published,

STAGE-0/FPS-URB-RCC_STAGE-0_WRF_experiment_design.yaml

@@ -92,7 +92,17 @@ simulations:
       Realization r9 is an HPC sensitivity simulation
     description: *ctrl_desc
     institution_id: UCL
-    status: completed
+    status: published
+    parameters: *ctrl_param   
+    parent_id: CTRL
+
+  - simulation_id: CTRL_r10
+    simulation: Control simulation, realization 10 performed on xxx HPC
+    version_realization_info: >
+      Realization r9 is an HPC sensitivity simulation
+    description: *ctrl_desc
+    institution_id: UM
+    status: running
     parameters: *ctrl_param   
     parent_id: CTRL
 
@@ -189,10 +199,26 @@ simulations:
     description: >
       As CTRL, but with SW_COND=0 (OFF) in URBPARM_LCZ.TBL
     institution_id: UCL
-    status: completed
+    status: published
     parameters:
-    parent_id: CTRL_r9
-
+    parent_id: CTRL_r9  
+
+  - simulation_id: CONV
+    simulation: New Grell convection scheme (G3)  
+    description: As CTRL, but with the New Grell convection scheme (G3)  
+    institution_id: UM
+    status: running
+    parameters:
+      cu_physics: 5     
+    parent_id: CTRL_r10
+
+  - simulation_id: CHEM
+    simulation: Chemical transport model (WRF-CHEM) switched on
+    description: As CTRL, but with chemical transport model (WRF-CHEM) on
+    institution_id: UM
+    status: running
+    parameters:
+    parent_id: CTRL_r10
 
   - simulation_id: SFAE
     simulation: Janjic MO surface layer and no aerosol climatology data
@@ -243,14 +269,6 @@ simulations:
       aer_opt: 0
     parent_id: CTRL
 
-  - simulation_id: CHEM
-    simulation: Chemical transport model (WRF-CHEM) switched on
-    description: As CTRL, but with chemical transport model (WRF-CHEM) on
-    institution_id: UM
-    status: running
-    parameters:
-    parent_id: CTRL
-
   - simulation_id: MICR
     simulation: P3 microphysics scheme
     description: As CTRL, but with P3 microphysics scheme

STAGE-0/FPS-URB-RCC_STAGE-0_WRF_experiment_list.csv

@@ -7,7 +7,8 @@ WRF451R-CTRL,v1-fpsurbrcc-s0r5,IDL-FCUL,published,EUR-12->PAR-3 nesting; WUDAPT
 WRF451R-CTRL,v1-fpsurbrcc-s0r6,IPSL,published,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
 WRF451R-CTRL,v1-fpsurbrcc-s0r7,UCAN,published,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
 WRF451R-CTRL,v1-fpsurbrcc-s0r8,UCAN,published,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
-WRF451R-CTRL,v1-fpsurbrcc-s0r9,UCL,completed,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
+WRF451R-CTRL,v1-fpsurbrcc-s0r9,UCL,published,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
+WRF451R-CTRL,v1-fpsurbrcc-s0r10,UM,running,EUR-12->PAR-3 nesting; WUDAPT LCZs on LANDMATE_PFT; BEP-BEM with URBAN parameters for Madrid
 WRF451R-URB0,v1-fpsurbrcc-s0r1,CYI,published,"As CTRL run, but urban model sitched off"
 WRF451R-PBL5,v1-fpsurbrcc-s0r1,IDL-FCUL,completed,"As CTRL, but with MYNN 2.5 PBL scheme"
 WRF451R-PBL1,v1-fpsurbrcc-s0r1,IDL-FCUL,published,"As CTRL, but with YSU PBL scheme"
@@ -17,12 +18,13 @@ WRF451R-DPAR,v1-fpsurbrcc-s0r1,UCAN,published,"As CTRL, but with default urban p
 WRF451R-DPAR,v1-fpsurbrcc-s0r2,UCAN,published,"As CTRL, but with default urban parameters instead Madrid parameters used in CTRL run"
 WRF451R-ALPX,v1-fpsurbrcc-s0r1,UCAN,published,"As CTRL, but with the extended convection-permitting domain (I4C ALPX-3)"
 WRF451R-CI4C,v1-fpsurbrcc-s0r1,UCAN,published,"As ALPX, but with the exact WRF configuration used in I4C"
-WRF451R-NOAC,v1-fpsurbrcc-s0r1,UCL,completed,"As CTRL, but with SW_COND=0 (OFF) in URBPARM_LCZ.TBL"
+WRF451R-NOAC,v1-fpsurbrcc-s0r1,UCL,published,"As CTRL, but with SW_COND=0 (OFF) in URBPARM_LCZ.TBL"
+WRF451R-CONV,v1-fpsurbrcc-s0r1,UM,running,"As CTRL, but with the New Grell convection scheme (G3)"
+WRF451R-CHEM,v1-fpsurbrcc-s0r1,UM,running,"As CTRL, but with chemical transport model (WRF-CHEM) on"
 WRF451R-SFAE,v1-fpsurbrcc-s0r1,CUNI,published,"As SFL2, but without aerosols"
 WRF451R-SFU1,v1-fpsurbrcc-s0r1,CUNI,published,"As SFL2 run, but with SLUCM urban model, dzbot=60, TS_SCHEME=2"
 WRF451R-SFNO,v1-fpsurbrcc-s0r1,CUNI,published,"As SFL2 run, but without urban model"
 WRF451R-SFL2,v1-fpsurbrcc-s0r1,CUNI,published,"As CTRL, but with Monin-Obukhov (Janjic) scheme"
 WRF451R-AER0,v1-fpsurbrcc-s0r1,CUNI,published,"As CTRL, but without aerosols"
-WRF451R-CHEM,v1-fpsurbrcc-s0r1,UM,running,"As CTRL, but with chemical transport model (WRF-CHEM) on"
 WRF451R-MICR,v1-fpsurbrcc-s0r1,AUTH-MC,published,"As CTRL, but with P3 microphysics scheme"
 WRF451R-URB2,v1-fpsurbrcc-s0r1,CIMA,published,"As CTRL run, but with BEP urban model"