GUI: IOPorts
In this panel, you can configure the various I/O Ports that Amiberry can emulate. Some of these options will depend on what hardware you have available in your system (e.g. serial ports).
This dropdown will be populated with any Recording devices detected in your system. You can select such a device, to use it as a Sampler in the emulated Amiga.
If you have any physical serial ports connected to your computer, they will be shown in this dropdown. You can select one, to use as the emulated Amiga serial port. You can also use USB to Serial adapters for this purpose. Only standard 7/8-bit serial protocols are supported, as the 9-bit serial protocol is not supported by PC hardware.
If you require handshake signals, you can enable this checkbox. This is usually required by certain hardware, like modems or other physical devices.
If you are connecting directly to another instance of Amiberry, you can use this option, to emulate a null-modem cable connection. Some games supported this feature.
You can use this option if you want to use multiple serial ports, by mapping Amiga side unit X = host serial port X.
If you have any MIDI devices connected, you can select them here. Amiberry uses the PortMidi library to send and receive MIDI messages.
This option will reroute the MIDI In to the MIDI Out port, as the name implies.
This option allows you to emulate such a dongle, which some software required in order to work.