diff --git a/packages/config/config/devices/0x027a/zse42.json b/packages/config/config/devices/0x027a/zse42.json
index 534a2835329..788de78f2e5 100644
--- a/packages/config/config/devices/0x027a/zse42.json
+++ b/packages/config/config/devices/0x027a/zse42.json
@@ -76,6 +76,7 @@
 		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
 		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
 		"reset": "When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
+		"wakeup": "Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash twice to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4280/zooz-zse42-manual.pdf"
 	}
 }