[BUG] TS0601 _TZE200_3yp57tby cannot set temperature

[MacSergey]

Bug description

I have issues with this device. I can see current temperature and it is immediatelly updated when I change temperature on thermastat, but when i am trying to set temperature from HA, it is not appied.

Steps to reproduce

trying to adjust target temperature

Expected behavior

target temperature is updated

Screenshots/Video

Screenshots/Video

[Paste/upload your media here]

Device signature

Device signature

{
  "node_descriptor": {
    "logical_type": 2,
    "complex_descriptor_available": 0,
    "user_descriptor_available": 0,
    "reserved": 0,
    "aps_flags": 0,
    "frequency_band": 8,
    "mac_capability_flags": 128,
    "manufacturer_code": 4417,
    "maximum_buffer_size": 66,
    "maximum_incoming_transfer_size": 66,
    "server_mask": 10752,
    "maximum_outgoing_transfer_size": 66,
    "descriptor_capability_field": 0
  },
  "endpoints": {
    "1": {
      "profile_id": "0x0104",
      "device_type": "0x0301",
      "input_clusters": [
        "0x0000",
        "0x0001",
        "0x0004",
        "0x0005",
        "0x000d",
        "0x0201",
        "0xef00"
      ],
      "output_clusters": [
        "0x000a",
        "0x0019"
      ]
    }
  },
  "manufacturer": "_TZE200_3yp57tby",
  "model": "TS0601",
  "class": "zhaquirks.tuya.ts0601_trv_sas.Thermostat_TZE200_c88teujp"
}

Diagnostic information

Diagnostic information

Logs

Logs

[Paste the logs here]

Additional information

No response

[Sir-Udo]

hi there,
that’s exactly my problem too.
I have this devices:
TS0601 von _TZE200_hhrtiq0x
Quirk: zhaquirks.tuya.ts0601_trv.SiterwellGS361_Type2,
with a perfect ZigBee connection
LQI: 230
RSSI: -35
I cannot change anything at the device via HA. no temperature, no on or off.
Please Help
THX
Udo

[Sir-Udo]

if its help, here some dagnostic data
"data": {
"ieee": "REDACTED",
"nwk": 2096,
"manufacturer": "_TZE200_hhrtiq0x",
"model": "TS0601",
"name": "_TZE200_hhrtiq0x TS0601",
"quirk_applied": true,
"quirk_class": "zhaquirks.tuya.ts0601_trv.SiterwellGS361_Type2",
"quirk_id": null,
"manufacturer_code": 4098,
"power_source": "Battery or Unknown",
"lqi": 230,
"rssi": -35,
"last_seen": "2024-12-27T07:24:52",
"available": true,
"device_type": "EndDevice",
"signature": {
"node_descriptor": {
"logical_type": 2,
"complex_descriptor_available": 0,
"user_descriptor_available": 0,
"reserved": 0,
"aps_flags": 0,
"frequency_band": 8,
"mac_capability_flags": 128,
"manufacturer_code": 4098,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 11264,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"1": {
"profile_id": "0x0104",
"device_type": "0x0301",
"input_clusters": [
"0x0000",
"0x0001",
"0x0004",
"0x0005",
"0x0201",
"0x0204",
"0xef00"
],
"output_clusters": [
"0x000a",
"0x0019"
]
}
},
"manufacturer": "_TZE200_hhrtiq0x",
"model": "TS0601"
},
"active_coordinator": false,
"entities": [
{
"entity_id": "climate.thermostat_bad_thermostat",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "select.thermostat_bad_tastatursperre",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "sensor.thermostat_bad_batterie",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "sensor.thermostat_bad_hlk_aktion",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "sensor.thermostat_bad_pi_warmebedarf",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "sensor.thermostat_bad_quelle_der_sollwertanderung",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "sensor.thermostat_bad_zeitstempel",
"name": "_TZE200_hhrtiq0x TS0601"
},
{
"entity_id": "update.thermostat_bad_firmware",
"name": "TZE200_hhrtiq0x TS0601"
}
],
"neighbors": [],
"routes": [],
"endpoint_names": [
{
"name": "THERMOSTAT"
}
],
"user_given_name": "Thermostat Bad",
"device_reg_id": "9d248dfed709f9c97e6988a259f64317",
"area_id": "bad",
"cluster_details": {
"1": {
"device_type": {
"name": "THERMOSTAT",
"id": 769
},
"profile_id": 260,
"in_clusters": {
"0x0000": {
"endpoint_attribute": "basic",
"attributes": {
"0x0013": {
"attribute": "ZCLAttributeDef(id=0x0013, name='alarm_mask', type=<flag 'AlarmMask'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='app_version', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": 85
},
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0006": {
"attribute": "ZCLAttributeDef(id=0x0006, name='date_code', type=<class 'zigpy.types.basic.LimitedCharString..LimitedCharString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0012": {
"attribute": "ZCLAttributeDef(id=0x0012, name='device_enabled', type=<enum 'Bool'>, zcl_type=<DataTypeId.bool: 16>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0014": {
"attribute": "ZCLAttributeDef(id=0x0014, name='disable_local_config', type=<flag 'DisableLocalConfig'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0008": {
"attribute": "ZCLAttributeDef(id=0x0008, name='generic_device_class', type=<enum 'GenericDeviceClass'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0009": {
"attribute": "ZCLAttributeDef(id=0x0009, name='generic_device_type', type=<enum 'GenericLightingDeviceType'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0003": {
"attribute": "ZCLAttributeDef(id=0x0003, name='hw_version', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0010": {
"attribute": "ZCLAttributeDef(id=0x0010, name='location_desc', type=<class 'zigpy.types.basic.LimitedCharString..LimitedCharString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0004": {
"attribute": "ZCLAttributeDef(id=0x0004, name='manufacturer', type=<class 'zigpy.types.basic.LimitedCharString..LimitedCharString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": "TZE200_hhrtiq0x"
},
"0x000c": {
"attribute": "ZCLAttributeDef(id=0x000C, name='manufacturer_version_details', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0005": {
"attribute": "ZCLAttributeDef(id=0x0005, name='model', type=<class 'zigpy.types.basic.LimitedCharString..LimitedCharString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": "TS0601"
},
"0x0011": {
"attribute": "ZCLAttributeDef(id=0x0011, name='physical_env', type=<enum 'PhysicalEnvironment'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0007": {
"attribute": "ZCLAttributeDef(id=0x0007, name='power_source', type=<enum 'PowerSource'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x000a": {
"attribute": "ZCLAttributeDef(id=0x000A, name='product_code', type=<class 'zigpy.types.basic.LVBytes'>, zcl_type=<DataTypeId.octstr: 65>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x000e": {
"attribute": "ZCLAttributeDef(id=0x000E, name='product_label', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x000b": {
"attribute": "ZCLAttributeDef(id=0x000B, name='product_url', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x000d": {
"attribute": "ZCLAttributeDef(id=0x000D, name='serial_number', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='stack_version', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x4000": {
"attribute": "ZCLAttributeDef(id=0x4000, name='sw_build_id', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='zcl_version', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0x0004": {
"endpoint_attribute": "groups",
"attributes": {
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='name_support', type=<flag 'NameSupport'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0x0005": {
"endpoint_attribute": "scenes",
"attributes": {
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='count', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='current_group', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='current_scene', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0005": {
"attribute": "ZCLAttributeDef(id=0x0005, name='last_configured_by', type=<class 'zigpy.types.named.EUI64'>, zcl_type=<DataTypeId.EUI64: 240>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0004": {
"attribute": "ZCLAttributeDef(id=0x0004, name='name_support', type=<flag 'NameSupport'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0003": {
"attribute": "ZCLAttributeDef(id=0x0003, name='scene_valid', type=<enum 'Bool'>, zcl_type=<DataTypeId.bool: 16>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0xef00": {
"endpoint_attribute": "tuya_manufacturer",
"attributes": {
"0x0215": {
"attribute": "ZCLAttributeDef(id=0x0215, name='battery', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 27
},
"0x0107": {
"attribute": "ZCLAttributeDef(id=0x0107, name='child_lock', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 0
},
"0x0404": {
"attribute": "ZCLAttributeDef(id=0x0404, name='mode', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 1
},
"0x0202": {
"attribute": "ZCLAttributeDef(id=0x0202, name='target_temperature', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 250
},
"0x0203": {
"attribute": "ZCLAttributeDef(id=0x0203, name='temperature', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 248
},
"0x0114": {
"attribute": "ZCLAttributeDef(id=0x0114, name='valve_detect', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 1
},
"0x026d": {
"attribute": "ZCLAttributeDef(id=0x026D, name='valve_state', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": null
},
"0x0112": {
"attribute": "ZCLAttributeDef(id=0x0112, name='window_detection', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=True)",
"value": 1
}
},
"unsupported_attributes": []
},
"0x0201": {
"endpoint_attribute": "thermostat",
"attributes": {
"0x0006": {
"attribute": "ZCLAttributeDef(id=0x0006, name='abs_max_cool_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0004": {
"attribute": "ZCLAttributeDef(id=0x0004, name='abs_max_heat_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0005": {
"attribute": "ZCLAttributeDef(id=0x0005, name='abs_min_cool_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0003": {
"attribute": "ZCLAttributeDef(id=0x0003, name='abs_min_heat_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0041": {
"attribute": "ZCLAttributeDef(id=0x0041, name='ac_capacity', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0047": {
"attribute": "ZCLAttributeDef(id=0x0047, name='ac_capacity_format', type=<enum 'ACCapacityFormat'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0046": {
"attribute": "ZCLAttributeDef(id=0x0046, name='ac_coil_temperature', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0043": {
"attribute": "ZCLAttributeDef(id=0x0043, name='ac_compressor_type', type=<enum 'ACCompressorType'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0044": {
"attribute": "ZCLAttributeDef(id=0x0044, name='ac_error_code', type=<flag 'ACErrorCode'>, zcl_type=<DataTypeId.map32: 27>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0045": {
"attribute": "ZCLAttributeDef(id=0x0045, name='ac_louver_position', type=<enum 'ACLouverPosition'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0042": {
"attribute": "ZCLAttributeDef(id=0x0042, name='ac_refrigerant_type', type=<enum 'ACRefrigerantType'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0040": {
"attribute": "ZCLAttributeDef(id=0x0040, name='ac_type', type=<enum 'ACType'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x001d": {
"attribute": "ZCLAttributeDef(id=0x001D, name='alarm_mask', type=<flag 'AlarmMask'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x001b": {
"attribute": "ZCLAttributeDef(id=0x001B, name='ctrl_sequence_of_oper', type=<enum 'ControlSequenceOfOperation'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=True, is_manufacturer_specific=False)",
"value": 2
},
"0x003a": {
"attribute": "ZCLAttributeDef(id=0x003A, name='emergency_heat_delta', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='local_temperature', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=True, is_manufacturer_specific=False)",
"value": 2480
},
"0x0010": {
"attribute": "ZCLAttributeDef(id=0x0010, name='local_temperature_calibration', type=<class 'zigpy.types.basic.int8s'>, zcl_type=<DataTypeId.int8: 40>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0018": {
"attribute": "ZCLAttributeDef(id=0x0018, name='max_cool_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0016": {
"attribute": "ZCLAttributeDef(id=0x0016, name='max_heat_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0017": {
"attribute": "ZCLAttributeDef(id=0x0017, name='min_cool_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0015": {
"attribute": "ZCLAttributeDef(id=0x0015, name='min_heat_setpoint_limit', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0019": {
"attribute": "ZCLAttributeDef(id=0x0019, name='min_setpoint_dead_band', type=<class 'zigpy.types.basic.int8s'>, zcl_type=<DataTypeId.int8: 40>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0022": {
"attribute": "ZCLAttributeDef(id=0x0022, name='number_of_daily_transitions', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0021": {
"attribute": "ZCLAttributeDef(id=0x0021, name='number_of_weekly_transitions', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='occupancy', type=<flag 'Occupancy'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0011": {
"attribute": "ZCLAttributeDef(id=0x0011, name='occupied_cooling_setpoint', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write|Scene: 19>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0012": {
"attribute": "ZCLAttributeDef(id=0x0012, name='occupied_heating_setpoint', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write|Scene: 19>, mandatory=False, is_manufacturer_specific=False)",
"value": 2500
},
"0x0034": {
"attribute": "ZCLAttributeDef(id=0x0034, name='occupied_setback', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0036": {
"attribute": "ZCLAttributeDef(id=0x0036, name='occupied_setback_max', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0035": {
"attribute": "ZCLAttributeDef(id=0x0035, name='occupied_setback_min', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='outdoor_temperature', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0007": {
"attribute": "ZCLAttributeDef(id=0x0007, name='pi_cooling_demand', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0008": {
"attribute": "ZCLAttributeDef(id=0x0008, name='pi_heating_demand', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0025": {
"attribute": "ZCLAttributeDef(id=0x0025, name='programing_oper_mode', type=<flag 'ProgrammingOperationMode'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write|Report: 11>, mandatory=False, is_manufacturer_specific=False)",
"value": 1
},
"0x001a": {
"attribute": "ZCLAttributeDef(id=0x001A, name='remote_sensing', type=<flag 'RemoteSensing'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x001e": {
"attribute": "ZCLAttributeDef(id=0x001E, name='running_mode', type=<enum 'RunningMode'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": 4
},
"0x0029": {
"attribute": "ZCLAttributeDef(id=0x0029, name='running_state', type=<flag 'RunningState'>, zcl_type=<DataTypeId.map16: 25>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": 1
},
"0x0031": {
"attribute": "ZCLAttributeDef(id=0x0031, name='setpoint_change_amount', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0030": {
"attribute": "ZCLAttributeDef(id=0x0030, name='setpoint_change_source', type=<enum 'SetpointChangeSource'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0032": {
"attribute": "ZCLAttributeDef(id=0x0032, name='setpoint_change_source_timestamp', type=<class 'zigpy.types.named.UTCTime'>, zcl_type=<DataTypeId.UTC: 226>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0020": {
"attribute": "ZCLAttributeDef(id=0x0020, name='start_of_week', type=<enum 'StartOfWeek'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x001c": {
"attribute": "ZCLAttributeDef(id=0x001C, name='system_mode', type=<enum 'SystemMode'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write|Scene: 19>, mandatory=True, is_manufacturer_specific=False)",
"value": 4
},
"0x0009": {
"attribute": "ZCLAttributeDef(id=0x0009, name='system_type_config', type=<flag 'SystemType'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0023": {
"attribute": "ZCLAttributeDef(id=0x0023, name='temp_setpoint_hold', type=<enum 'TemperatureSetpointHold'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0024": {
"attribute": "ZCLAttributeDef(id=0x0024, name='temp_setpoint_hold_duration', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0013": {
"attribute": "ZCLAttributeDef(id=0x0013, name='unoccupied_cooling_setpoint', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0014": {
"attribute": "ZCLAttributeDef(id=0x0014, name='unoccupied_heating_setpoint', type=<class 'zigpy.types.basic.int16s'>, zcl_type=<DataTypeId.int16: 41>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0037": {
"attribute": "ZCLAttributeDef(id=0x0037, name='unoccupied_setback', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0039": {
"attribute": "ZCLAttributeDef(id=0x0039, name='unoccupied_setback_max', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0038": {
"attribute": "ZCLAttributeDef(id=0x0038, name='unoccupied_setback_min', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0x0204": {
"endpoint_attribute": "thermostat_ui",
"attributes": {
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='keypad_lockout', type=<enum 'KeypadLockout'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=True, is_manufacturer_specific=False)",
"value": 0
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='schedule_programming_visibility', type=<enum 'ScheduleProgrammingVisibility'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='temperature_display_mode', type=<enum 'TemperatureDisplayMode'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=True, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0x0001": {
"endpoint_attribute": "power",
"attributes": {
"0x0052": {
"attribute": "ZCLAttributeDef(id=0x0052, name='battery_2_a_hr_rating', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0055": {
"attribute": "ZCLAttributeDef(id=0x0055, name='battery_2_alarm_mask', type=<flag 'bitmap8'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x005e": {
"attribute": "ZCLAttributeDef(id=0x005E, name='battery_2_alarm_state', type=<flag 'bitmap32'>, zcl_type=<DataTypeId.map32: 27>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0050": {
"attribute": "ZCLAttributeDef(id=0x0050, name='battery_2_manufacturer', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x005a": {
"attribute": "ZCLAttributeDef(id=0x005A, name='battery_2_percent_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x005b": {
"attribute": "ZCLAttributeDef(id=0x005B, name='battery_2_percent_thres1', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x005c": {
"attribute": "ZCLAttributeDef(id=0x005C, name='battery_2_percent_thres2', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x005d": {
"attribute": "ZCLAttributeDef(id=0x005D, name='battery_2_percent_thres3', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0041": {
"attribute": "ZCLAttributeDef(id=0x0041, name='battery_2_percentage_remaining', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0053": {
"attribute": "ZCLAttributeDef(id=0x0053, name='battery_2_quantity', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0054": {
"attribute": "ZCLAttributeDef(id=0x0054, name='battery_2_rated_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0051": {
"attribute": "ZCLAttributeDef(id=0x0051, name='battery_2_size', type=<enum 'BatterySize'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0056": {
"attribute": "ZCLAttributeDef(id=0x0056, name='battery_2_volt_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0057": {
"attribute": "ZCLAttributeDef(id=0x0057, name='battery_2_volt_thres1', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0058": {
"attribute": "ZCLAttributeDef(id=0x0058, name='battery_2_volt_thres2', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0059": {
"attribute": "ZCLAttributeDef(id=0x0059, name='battery_2_volt_thres3', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0040": {
"attribute": "ZCLAttributeDef(id=0x0040, name='battery_2_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0072": {
"attribute": "ZCLAttributeDef(id=0x0072, name='battery_3_a_hr_rating', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0075": {
"attribute": "ZCLAttributeDef(id=0x0075, name='battery_3_alarm_mask', type=<flag 'bitmap8'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x007e": {
"attribute": "ZCLAttributeDef(id=0x007E, name='battery_3_alarm_state', type=<flag 'bitmap32'>, zcl_type=<DataTypeId.map32: 27>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0070": {
"attribute": "ZCLAttributeDef(id=0x0070, name='battery_3_manufacturer', type=<class 'zigpy.types.basic.CharacterString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x007a": {
"attribute": "ZCLAttributeDef(id=0x007A, name='battery_3_percent_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x007b": {
"attribute": "ZCLAttributeDef(id=0x007B, name='battery_3_percent_thres1', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x007c": {
"attribute": "ZCLAttributeDef(id=0x007C, name='battery_3_percent_thres2', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x007d": {
"attribute": "ZCLAttributeDef(id=0x007D, name='battery_3_percent_thres3', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0061": {
"attribute": "ZCLAttributeDef(id=0x0061, name='battery_3_percentage_remaining', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0073": {
"attribute": "ZCLAttributeDef(id=0x0073, name='battery_3_quantity', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0074": {
"attribute": "ZCLAttributeDef(id=0x0074, name='battery_3_rated_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0071": {
"attribute": "ZCLAttributeDef(id=0x0071, name='battery_3_size', type=<enum 'BatterySize'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0076": {
"attribute": "ZCLAttributeDef(id=0x0076, name='battery_3_volt_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0077": {
"attribute": "ZCLAttributeDef(id=0x0077, name='battery_3_volt_thres1', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0078": {
"attribute": "ZCLAttributeDef(id=0x0078, name='battery_3_volt_thres2', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0079": {
"attribute": "ZCLAttributeDef(id=0x0079, name='battery_3_volt_thres3', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0060": {
"attribute": "ZCLAttributeDef(id=0x0060, name='battery_3_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0032": {
"attribute": "ZCLAttributeDef(id=0x0032, name='battery_a_hr_rating', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0035": {
"attribute": "ZCLAttributeDef(id=0x0035, name='battery_alarm_mask', type=<flag 'bitmap8'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x003e": {
"attribute": "ZCLAttributeDef(id=0x003E, name='battery_alarm_state', type=<flag 'bitmap32'>, zcl_type=<DataTypeId.map32: 27>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0030": {
"attribute": "ZCLAttributeDef(id=0x0030, name='battery_manufacturer', type=<class 'zigpy.types.basic.LimitedCharString..LimitedCharString'>, zcl_type=<DataTypeId.string: 66>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x003a": {
"attribute": "ZCLAttributeDef(id=0x003A, name='battery_percent_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x003b": {
"attribute": "ZCLAttributeDef(id=0x003B, name='battery_percent_thres1', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x003c": {
"attribute": "ZCLAttributeDef(id=0x003C, name='battery_percent_thres2', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x003d": {
"attribute": "ZCLAttributeDef(id=0x003D, name='battery_percent_thres3', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0021": {
"attribute": "ZCLAttributeDef(id=0x0021, name='battery_percentage_remaining', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Report: 9>, mandatory=False, is_manufacturer_specific=False)",
"value": 54
},
"0x0033": {
"attribute": "ZCLAttributeDef(id=0x0033, name='battery_quantity', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": 2
},
"0x0034": {
"attribute": "ZCLAttributeDef(id=0x0034, name='battery_rated_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": 15
},
"0x0031": {
"attribute": "ZCLAttributeDef(id=0x0031, name='battery_size', type=<enum 'BatterySize'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": 3
},
"0x0036": {
"attribute": "ZCLAttributeDef(id=0x0036, name='battery_volt_min_thres', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0037": {
"attribute": "ZCLAttributeDef(id=0x0037, name='battery_volt_thres1', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0038": {
"attribute": "ZCLAttributeDef(id=0x0038, name='battery_volt_thres2', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0039": {
"attribute": "ZCLAttributeDef(id=0x0039, name='battery_volt_thres3', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0020": {
"attribute": "ZCLAttributeDef(id=0x0020, name='battery_voltage', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0010": {
"attribute": "ZCLAttributeDef(id=0x0010, name='mains_alarm_mask', type=<flag 'MainsAlarmMask'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='mains_frequency', type=<class 'zigpy.types.basic.uint8_t'>, zcl_type=<DataTypeId.uint8: 32>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0012": {
"attribute": "ZCLAttributeDef(id=0x0012, name='mains_volt_max_thres', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0011": {
"attribute": "ZCLAttributeDef(id=0x0011, name='mains_volt_min_thres', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='mains_voltage', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0013": {
"attribute": "ZCLAttributeDef(id=0x0013, name='mains_voltage_dwell_trip_point', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
}
},
"out_clusters": {
"0x000a": {
"endpoint_attribute": "time",
"attributes": {
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0004": {
"attribute": "ZCLAttributeDef(id=0x0004, name='dst_end', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0005": {
"attribute": "ZCLAttributeDef(id=0x0005, name='dst_shift', type=<class 'zigpy.types.basic.int32s'>, zcl_type=<DataTypeId.int32: 43>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0003": {
"attribute": "ZCLAttributeDef(id=0x0003, name='dst_start', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0008": {
"attribute": "ZCLAttributeDef(id=0x0008, name='last_set_time', type=<class 'zigpy.types.named.UTCTime'>, zcl_type=<DataTypeId.UTC: 226>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0007": {
"attribute": "ZCLAttributeDef(id=0x0007, name='local_time', type=<class 'zigpy.types.named.LocalTime'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0006": {
"attribute": "ZCLAttributeDef(id=0x0006, name='standard_time', type=<class 'zigpy.types.named.StandardTime'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='time', type=<class 'zigpy.types.named.UTCTime'>, zcl_type=<DataTypeId.UTC: 226>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='time_status', type=<flag 'TimeStatus'>, zcl_type=<DataTypeId.map8: 24>, access=<ZCLAttributeAccess.Read|Write_Optional: 5>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='time_zone', type=<class 'zigpy.types.basic.int32s'>, zcl_type=<DataTypeId.int32: 43>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0009": {
"attribute": "ZCLAttributeDef(id=0x0009, name='valid_until_time', type=<class 'zigpy.types.named.UTCTime'>, zcl_type=<DataTypeId.UTC: 226>, access=<ZCLAttributeAccess.Read|Write: 3>, mandatory=False, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": []
},
"0x0019": {
"endpoint_attribute": "ota",
"attributes": {
"0xfffd": {
"attribute": "ZCLAttributeDef(id=0xFFFD, name='cluster_revision', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0002": {
"attribute": "ZCLAttributeDef(id=0x0002, name='current_file_version', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": 85
},
"0x0003": {
"attribute": "ZCLAttributeDef(id=0x0003, name='current_zigbee_stack_version', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0004": {
"attribute": "ZCLAttributeDef(id=0x0004, name='downloaded_file_version', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0005": {
"attribute": "ZCLAttributeDef(id=0x0005, name='downloaded_zigbee_stack_version', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0001": {
"attribute": "ZCLAttributeDef(id=0x0001, name='file_offset', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x000a": {
"attribute": "ZCLAttributeDef(id=0x000A, name='image_stamp', type=<class 'zigpy.types.basic.uint32_t'>, zcl_type=<DataTypeId.uint32: 35>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0008": {
"attribute": "ZCLAttributeDef(id=0x0008, name='image_type_id', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0006": {
"attribute": "ZCLAttributeDef(id=0x0006, name='image_upgrade_status', type=<enum 'ImageUpgradeStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x0007": {
"attribute": "ZCLAttributeDef(id=0x0007, name='manufacturer_id', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0009": {
"attribute": "ZCLAttributeDef(id=0x0009, name='minimum_block_req_delay', type=<class 'zigpy.types.basic.uint16_t'>, zcl_type=<DataTypeId.uint16: 33>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0xfffe": {
"attribute": "ZCLAttributeDef(id=0xFFFE, name='reporting_status', type=<enum 'AttributeReportingStatus'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x000b": {
"attribute": "ZCLAttributeDef(id=0x000B, name='upgrade_activation_policy', type=<enum 'UpgradeActivationPolicy'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
},
"0x0000": {
"attribute": "ZCLAttributeDef(id=0x0000, name='upgrade_server_id', type=<class 'zigpy.types.named.EUI64'>, zcl_type=<DataTypeId.EUI64: 240>, access=<ZCLAttributeAccess.Read: 1>, mandatory=True, is_manufacturer_specific=False)",
"value": null
},
"0x000c": {
"attribute": "ZCLAttributeDef(id=0x000C, name='upgrade_timeout_policy', type=<enum 'UpgradeTimeoutPolicy'>, zcl_type=<DataTypeId.enum8: 48>, access=<ZCLAttributeAccess.Read: 1>, mandatory=False, is_manufacturer_specific=False)",
"value": null
}
},
"unsupported_attributes": [
2,
"current_file_version"
]
}
}

[MacSergey]

hi there,

that’s exactly my problem too.

I have this devices:

TS0601 von _TZE200_hhrtiq0x

Quirk: zhaquirks.tuya.ts0601_trv.SiterwellGS361_Type2,

with a perfect ZigBee connection

LQI: 230

RSSI: -35

I cannot change anything at the device via HA. no temperature, no on or off.

Please Help

THX

Udo

I found the solution, I installed custom quirk for my device from this repo and everything started working correctly

https://github.com/jacekk015/zha_quirks

[Sir-Udo]

oh, ok, thx.
i have no idee ybout "quirks"
i only create the directory and copy the file into?
no more to do?
please help
thx udo

[MacSergey]

oh, ok, thx.

i have no idee ybout "quirks"

i only create the directory and copy the file into?

no more to do?

please help

thx udo

Yes, follow the instructions from the repo

[Sir-Udo]

ok, thx
lol "He who can read, is clearly in advantage" me ;-)
thx

[Sir-Udo]

ok, it is the same error like bevor.
some one a other idee?

[prairiesnpr]

ok, it is the same error like bevor. some one a other idee?

Your error is probably related to overall zigbee mesh issues or a device problem. A delivery error isn't going to be solved by a quirk.

[Sir-Udo]

at 10 devices?
LQI: 224
RSSI: -44
LQI: 244
RSSI: -42
LQI: 242
RSSI: -41
etc. etc.
with this koordinator
SLZB-06M