shadowsocks-qt5.SlackBuild

#!/bin/sh

# Slackware build script for shadowsocks-qt5

# Copyright 2016 SlackwareCN Community
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# |-----------------------------------------------------------------| #
# REMOVE THIS ENTIRE BLOCK OF TEXT #
#
# A license is required, and we strongly suggest you use the above
# BSD/MIT style license. We DO NOT accept "Public Domain" scripts.
# Public domain is not valid in some countries, and no license is
# worse than a "bad" license in those countries.
#
# This template is not meant to be a 'cut and paste' script to
# enable any random user to make a working package.  While
# we're certainly not discouraging use of this template, if
# you haven't manually gone through each step of the process
# without the build script (typically as a normal user, as this
# will reveal problems that you won't see as root), then there's
# a good chance that something important is missing from your
# submission.

# When using this template script, please remove as many of
# these unnecessary comments as possible.  Commented code is
# a good thing, but if it's obvious, there's no need to comment it.
#
# AGAIN, REMOVE THE COMMENTS IF THEY ARE NOT NEEDED - DON'T JUST
# DELETE THIS BLOCK OF TEXT WITHOUT BOTHERING TO READ WHAT'S IN IT.
#
# |-----------------------------------------------------------------| #

PRGNAM=shadowsocks-qt5			# replace with name of program
VERSION=${VERSION:-3.0.1}	# replace with version of program
BUILD=${BUILD:-1}
TAG=${TAG:-_SlackwareCN}		# the "_SBo" is required

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) ARCH=i586 ;;
    arm*) ARCH=arm ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
       *) ARCH=$( uname -m ) ;;
  esac
fi

CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}	# For consistency's sake, use this
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}	# Drop the package in /tmp

if [ "$ARCH" = "i586" ]; then
  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

set -e # Exit on most errors
# If you prefer to do selective error checking with
#   command || exit 1
# then that's also acceptable.

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
tar xvf $CWD/v$VERSION.tar.gz

cd $PRGNAM-$VERSION
find -L . \
 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
  -o -perm 511 \) -exec chmod 755 {} \; -o \
 \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;

# Your application will probably need different configure flags;
# these are provided as an example only.
# Be sure to build only shared libraries unless there's some need for
# static.
# CFLAGS="$SLKCFLAGS" \
# CXXFLAGS="$SLKCFLAGS" \
# ./configure \
#   --prefix=/usr \
#   --libdir=/usr/lib${LIBDIRSUFFIX} \
#   --sysconfdir=/etc \
#   --localstatedir=/var \
#   --mandir=/usr/man \
#   --docdir=/usr/doc/$PRGNAM-$VERSION \
#   --build=$ARCH-slackware-linux


# Compile the application and install it into the $PKG directory
mkdir build && cd build
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make
make install

# Strip binaries and libraries - this can be done with 'make install-strip'
# in many source trees, and that's usually acceptable if so, but if not,
# use this:
find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Compress man pages
# If the man pages are installed to /usr/share/man instead, you'll need to either
# add the --mandir=/usr/man flag to configure or move them manually after the
# make install process is run.
# find $PKG/usr/man -type f -exec gzip -9 {} \;
# for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done

# Compress info pages and remove the package's dir file
# If no info pages are installed by the software, don't leave this in the script
# rm -f $PKG/usr/info/dir
# gzip -9 $PKG/usr/info/*.info*

# Remove perllocal.pod and other special files that don't need to be installed,
# as they will overwrite what's already on the system.  If this is not needed,
# remove it from the script.
# Remove 'special' files
find $PKG -name perllocal.pod \
  -o -name ".packlist" \
  -o -name "*.bs" \
  | xargs rm -f

# Copy program documentation into the package
# The included documentation varies from one application to another, so be sure
# to adjust your script as needed
# Also, include the SlackBuild script in the documentation directory
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
# cp -a \
#   <documentation> \
#   $PKG/usr/doc/$PRGNAM-$VERSION
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild

# Copy the slack-desc (and a custom doinst.sh if necessary) into ./install
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh

# Make the package; be sure to leave it in $OUTPUT
# If package symlinks need to be created during install *before*
# your custom contents of doinst.sh runs, then add the -p switch to
# the makepkg command below -- see makepkg(8) for details
cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}