Releases: seud0nym/tch-gui-unhide
Releases · seud0nym/tch-gui-unhide
2021.05.09
tch-gui-unhide
- Fixed Local Network card showed incorrect IPv6 prefix
- Fixed DHCP range validation errors when changing LAN IP address
- Fixed GUI failing to display and various other issues when in bridged mode
- Removed ability to set the tch-nginx-gui version of bridged mode through Broadband screen and Internet Access
- Fixed VLAN detection when manually changing Broadband connection mode
- When configuring VLAN, set IPv6 (wan6) interface as well as IPv4 (wan) interface
- Set IPv6 (wan6) interface as well as IPv4 (wan) interface when manually changing Broadband connection mode
- Added warning to remind that WAN connection mode has to be applied after disabling WAN sensing
- Added VLAN status to Broadband card
- Added Bridged Mode button to Broadband card (same as Local Network card)
- Added IPv6 Address request behavior setting to Internet Access DHCP configuration (#24) and PPPoE configuration
- Added IPv6 Prefix request behavior setting to Internet Access DHCP configuration (#24) and PPPoE configuration
- Added IPv6 Prefix Size to Local Network screen (FW 18 only)
- Added IPv6 ULA Prefix to Local Network screen, and button to randomly generate ULA prefix (FW 18 only)
- Added ability to set wan6 interface to either same as wan interface or '@wan' when using PPPoE (Fix for Exetel users)
- PPPoE username/password entered in Internet Access screen was only saved on the WAN interface and not updated on to the PPP interface like it is in the basic configuration screen
- Added ability to set LAN Domain Name on Local Network screen
- Added new Management tab when MTD backups enabled (by mtd-backup script cron job) to show list of backups on USB
- Added system Redirect and NAT firewall rules to Port Forwarding tab
- Renamed Packet Filter Rules tab in Firewall to Firewall Rules, and added ability to display NAT, Mangle and Raw tables in addition to Filter table
- Applied consistent font size to all IP addresses displayed on Internet and Local Network cards
- Show waiting spinner before opening modals
- Forces protection against loss of root when doing a factory reset from the GUI by preserving the password files and dropbear (SSH) configuration
de-telstra
- Fixed "uci: Entry not found" message when executed after Telstra AIR QoS configuration already removed
- Added -F option to enable/disable protection against loss of root when doing a factory reset from the GUI, by preserving the password files and dropbear (SSH) configuration (Note: installation of
tch-gui-unhideALWAYS forces root RTFD protection)
New Utility Scripts
- intercept-dns: Enable DNS interception and hijacking
- mtd-backup: Perform ad-hoc or scheduled backups of MTD partitions and other configuration to an attached USB drive
- mtd-restore: Restore backed up MTD partitions
Download Statistics
2021.04.01
tch-gui-unhide
- Fixed bug in Mobile Network Operators tab in FW 17
- Fixed peerdns and ipv6 configuration settings in Internet DHCP and static screens
- Changed status text 'on' to 'connected' on Internet card
- Added option to ignore a new release (hides the 'Update Available' button until the next release)
Download Statistics
2021.03.17
tch-gui-unhide
- Added current receive/transmit raw throughput (Mb/s) to Broadband and Local Network cards
- Reformatted up/down volume on Broadband card to prevent wrap-around
- Fix firewall synflood_rate set with incorrect value
- Added firewall includes to System Rules tab
- Added tab to show active packet filter rules (iptables/ip6tables)
de-telstra
- Remove CWMP even if already disabled (#22)
- Fix tls-thor package not found message
- Remove some more FON QoS settings
- Changed opkg repository for Homeware 18
Download Statistics
2021.02.22
tch-gui-unhide
- When running on Mobile Internet, added check for possibly disabled Telstra SIM (low received byte count compared to transmitted bytes)
- Reworked Firewall GUI to use multiple tabs
- Exposed Firewall advanced settings, system-defined rules, and zone configuration in new tabs
- If the NAT Helpers card is hidden (using tch-gui-unhide-cards), the NAT Helpers functionality is moved to a tab in the Firewall GUI
- Moved Port Forwarding (from WAN Services) to a new tab in Firewall GUI
- Reworked Firewall card to show default incoming policy (DROP, REJECT, or ACCEPT) rather than the more confusing enabled/disabled, and added number of port forwarding rules and total number of active rules (system + user-defined)
- Reworked WAN Services card to show WoL over Internet and UPnP status, plus number of defined DNS rules
- Added support for insert option in dial plan entries
- Added Usage History tab to Broadband, and a supporting cron job to generate the history (creates the history from the rolling 24-hour data collected by the default traffic monitoring cron job for displaying the traffic chart)
- Improved card sizing on smaller-width screens
- Fixed bug that prevented re-enabling mobile service after disabling
- Fixed bug in cron numeric fields pattern matching
set-optimal-bank-plan
- Handle different bank layouts correctly (see https://whrl.pl/RgdWhV and https://whrl.pl/RgdXmv)
Download Statistics
2021.02.06
tch-gui-unhide
- Fixed 'invalid instance' error on QoS Queues tab when using DSL WAN
- Ignored Telstra Air SSIDs when determining if any devices missing in QoS Device tab
- Fixed QoS classify/reclassify rules editing on FW 17
- Fixed incorrect WAN device count on QoS card
- Added ability to enable/disable the SSH AFG configuration added by the root acquisition process
- Added LTE Band Selection to Mobile Configuration
- Added new Mobile Auto-Failover tab to configure timeouts after connection failure
- Added modified Eco Settings card from https://github.com/Ansuel/tch-nginx-gui/tree/master/decompressed/gui_file/www
tch-gui-unhide-cards
- Added support for Eco Settings card
reset-to-factory-defaults-with-root
- Applied latest changes from https://hack-technicolor.readthedocs.io/en/stable/Upgrade/
2021.02.01
tch-gui-unhide
Minor update for FW 18 users; Bug fix release for FW 17 users.
- Fixed QoS card on FW 17
- Removed QoS classify/reclassify rules editing on FW 17 until bugs (e.g. incomplete lists, missing data after save, and errors on delete) resolved
- Fixed NAT Helpers card on FW 17
- Added warning message on QoS rule sequencing
2021.01.31
WARNING: Some of the QoS changes in this release are not compatible with FW 17 releases.
tch-gui-unhide
- Added -V option to show script release, current installed release and latest release available on GitHub
- Added -v option to optionally disable update checking (default is to enable check for new releases and show the 'Update Available' button in GUI)
- Replaced checkboxes with switches on Mobile Configuration modal
- Added Device Capabilities information (read-only) to Mobile Configuration modal
- Fixed check for DSL WAN interface on Broadband and Internet cards
- Fixed static IPs/DNS missing from Internet card
- Fixed QoS card and Queues tab which incorrectly showed QoS on WAN as disabled when it is really enabled
- Correctly show re-allocated LAN to WAN ports on QoS Queues tab
- Improved QoS card to show QoS status separately for WAN, LAN and Wi-Fi
- Bug fixes and improvements to the QoS Classify Rules tab
- Exposed Source and Destination interfaces on QoS Classify Rules
- Correctly allocate QoS devices to QoS interfaces on the QoS Queues tab
- Moved QoS Labels to new tab
- Added new tab to modify QoS Device settings
- Added new tab to modify QoS Reclassify rules
- Added new tab to modify QoS Upload Shaping
2021.01.16
tch-gui-unhide
- Added Network Operators to Mobile tabs to add/edit MCC/MNC values
- Added auto refresh to Telephony card
- Stop all auto-refreshes when any modal opened
- Fixed icon display issue on Telstra Classic theme [#19]
- Allowed add/delete of dial plan entries
- Clarified PoS on Telephony Codecs tab
- Allow entry of SIP Domain Name and Realm
- Optionally use a decrypted text field (instead of masked password field) for SIP Profile passwords
- Allow assignment of IPv6 address to router via DHCP without LAN prefix
- Show individual helper status on NAT Helpers card
- Moved WAN Sensing L3 status from Internet Access card to Broadband card with L2 status
- Added DNS Server IPs to Internet card [#20]
- Standardised IPv4 and IPv6 DNS settings across DHCP/PPPoE/Static Internet Access modal snippets, plus added ability to enable/disable auto-discovery of ISP IPv6 DNS servers
Extras
- tch-gui-unhide-xtra.minidlna: Correctly restore /lib/functions/contentsharing.sh after minidlna opkg removed
- tch-gui-unhide-xtra.samba36-server: Correctly restore /lib/functions/contentsharing.sh after samba36-server opkg removed
2021.01.06
tch-gui-unhide
- Added auto refresh to Broadband card
- Added auto refresh to Internet card
- Added auto refresh to Devices card, and show booster-connected Wi-Fi devices separately
- Added WAN Supervision to Internet PPPoE Mode snippet
- Fix formatting on Mobile card
- Static and DHCP Internet modals incorrectly used wan network interface "ipv6" setting to determine IPv6 status (setting only relevant to PPP connection method)
- Hide custom firewall rules if User Defined firewall level not selected
2021.01.01
tch-gui-unhide:
- Fixed bug that caused Telephony card to crash when no call statistics recorded [#18]
- Added button to indicate when a new version is available
- Added tch-gui-unhide release version to landing page (18.1.c only)
- Allow setup of wan connection when in bridge mode ( Applied Ansuel/tch-nginx-gui@1903e35)
- Ensure wan6 auto, proto and ifname settings match wan on save