Releases: seud0nym/tch-gui-unhide
Releases · seud0nym/tch-gui-unhide
2022.11.01
Changes
tch-gui-unhide
- Allow Local Network IPv4 address to be provided by DHCP when in Bridged mode (#113)
- Fixed multiple IPv6 addresses overflowing on Local Network card
- Fixed bug in DSCP handling on QoS Labels tab
- Fixed bug in handling of errors when editing bandwidth-shaped devices in QoS (#114)
- Debugging now enabled by default in pre-releases
- Fixed layout issues in FW 20.4.0428
- Fixed Wi-Fi Booster count in FW 20.4.0428
- Fixed Devices screen in FW 20.4.0428
- Fixed tch-gui-unhide text colour in landing screen in FW 20.4.0428
- Updated tproxy-go to v2022.10.29-0-g95c0329
mtd-backup
- Added version to backup image file name for bootfs1/2 partitions (Smart Modem Gen 3)
mtd-restore
- Added new -b option to swap the banks when restoring firmware bank partitions (e.g. if restoring bank_1, write it into bank_2)
- Added new --dry-run option to show the commands to be executed instead of actually running them
reset-to-factory-defaults-with-root
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
safe-firmware-upgrade
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
- Improved detection of updated dependency
show-bank-plan
- Now indicates if the booted firmware is vulnerable to tch-exploit or not
Download Statistics
2022.10.28
Changes
All changes from Pre-release 2022.10.14 and 2022.10.27 PLUS:
tch-gui-unhide
- Fixed Devices screen in FW 20.4.0428
- Fixed tch-gui-unhide text colour in landing screen in FW 20.4.0428
Download Statistics
2022.10.27
Changes
All changes from Pre-release 2022.10.14 PLUS:
tch-gui-unhide
- Fixed bug in DSCP handling on QoS Labels tab
- Fixed bug in handling of errors when editing bandwidth-shaped devices in QoS (#114)
- Fixed layout issues in FW 20.4.0428
- Fixed Wi-Fi Booster count in FW 20.4.0428
mtd-backup
- Added version to backup image file name for bootfs1/2 partitions (Smart Modem Gen 3)
mtd-restore
- Added new -b option to swap the banks when restoring firmware bank partitions (e.g. if restoring bank_1, write it into bank_2)
- Added new --dry-run option to show the commands to be executed instead of actually running them
reset-to-factory-defaults-with-root
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
safe-firmware-upgrade
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
- Improved detection of updated dependency
show-bank-plan
- Now indicates if the booted firmware is vulnerable to tch-exploit or not
Download Statistics
2022.10.14
Changes
tch-gui-unhide
- Allow Local Network IPv4 address to be provided by DHCP when in Bridged mode (#113)
- Fixed multiple IPv6 addresses overflowing on Local Network card
- Debugging now enabled by default in pre-releases
Download Statistics
2022.10.06
Changes
tch-gui-unhide
- Fixed Local Network and Broadband screens were showing error message
{ "success":false, "message":"Unknown Network Mode: SAVE?" }when saving any change (except changing between routed mode and bridged mode)
Download Statistics
2022.10.04
Changes
tch-gui-unhide
- Fixed Bridged Mode broken in 2022.08.20 (when switching to Bridged mode, some routed configuration silently failed to be removed)
- Fixed broken tc install on MIPS devices (#108)
- Fixed incorrect device IPv6 address on Guest interfaces
- Fixed bug preventing display of Mobile tabs (FW 17.2)
- Fixed bug preventing changes to Local Network screen when WAN IPv6 not enabled
- Fixed bug where LAN IPv6 ULA prefix could be displayed even if IPv6 disabled
- Fixed IPv6 address display on PPPoE connections
- Added domain name and extra DHCP settings on Guest interfaces
- Show LAN IPv6 prefix size even if no WAN prefix has been assigned (if LAN IPv6 enabled)
- IPv6 ULA configuration now visible on FW 17.2
- Completely reworked Local Network screen to attempt to improve performance
de-telstra
- Removed lte-logger-doctor from minimum memory mode disabled services because it breaks the Mobile Diagnostics chart
reset-to-factory-defaults-with-root
- IPv6 static leases were not restored as expected
safe-firmware-upgrade
- IPv6 static leases were not restored as expected
Download Statistics
2022.09.26
Changes
All changes from Pre-releases 2022.09.06 and 2022.09.21 PLUS:
tch-gui-unhide
- Fixed bug preventing changes to Local Network screen when WAN IPv6 not enabled
- Fixed bug where LAN IPv6 ULA prefix could be displayed even if IPv6 disabled
- Show LAN IPv6 prefix size even if no WAN prefix has been assigned (if LAN IPv6 enabled)
- IPv6 ULA configuration now visible on FW 17.2
- Completely reworked Local Network screen to attempt to improve performance
Download Statistics
2022.09.21
Changes
Changes from Pre-release 2022.09.06 PLUS:
tch-gui-unhide
- Fixed incorrect device IPv6 address display on Guest interfaces
- Fixed bug preventing display of Mobile tabs (FW 17.2)
- Added domain name and extra DHCP settings on Guest interfaces
- Allow for different IPv6 RPC network interfaces (e.g. PPPoE uses wan instead of wan6)
de-telstra
- Removed lte-logger-doctor from minimum memory mode disabled services because it breaks the Mobile Diagnostics chart
Download Statistics
2022.09.06
Changes
tch-gui-unhide
- Fixed broken tc install on MIPS devices (#108)
reset-to-factory-defaults-with-root
- IPv6 static leases were not restored as expected
safe-firmware-upgrade
- IPv6 static leases were not restored as expected
Download Statistics
2022.08.20
Changes
tch-gui-unhide
- Fixed bug where utilities were always copied to USB during GUI upgrade, even if they didn't exist before
- Fixed bug where Cancel/Save buttons were not replaced with Close button after successfully updating Broadband configuration
- Fixed layout issues and missing status for Mobile Only Mode on Mobile card
- Fixed LAN IPv6 in bridged mode
- Fixed IPv6 DNS Server display on Local Network card when DNS hijacking enabled
- Added Permanent WWAN switch to Broadband Configuration (Thanks to @UncleSam1966 for original code)
- When enabled, Mobile Internet will be permanently connected at a lower priority so that normal traffic will pass through the WAN connection, but if that fails, traffic will be routed immediately through the WWAN connection)
- NOTE: Should not be used with Telstra Backup SIM - it will probably get disabled
- Added separate tabs for Fixed and Mobile Broadband Usage
- Added device IPv6 addresses to Local Network card
- Added device IPv6 addresses to Local Network Screen
- Added Statistics tab to Telephony
- Added ability to configure WWAN peer DNS
- Added SIM card service provider to Mobile card header
- Added direct link to SMS tab from Unread SMS count on Mobile card
- Removed "SMS messages not supported with the Telstra Backup SIM" alert if SMS messages were found
- Removed log check during install (not reliable)
- Daily upload/download volume shown on Broadband card includes both Fixed and Mobile usage (not just current active interface)
- Internet card now correctly shows both Fixed and Mobile IPs if both active
- Hide Mobile Only Mode status on Mobile card if WAN Sensing disabled
- Hide Mobile Only Mode switch on Mobile Configuration screen if WAN Sensing disabled
- Hide Mobile Auto-Failover tab if WAN Sensing disabled
- When DNS hijacking enabled, automatically detect additional IPv6 addresses assigned to the specified IPv6 DNS Server (when a WAN interface comes up) and automatically exclude them from interception
- Updated tproxy-go to v2022.08.20-0-gcf5bf47
de-telstra
- WPS setting not correctly applied on FW 20.4 (Smart Modem Gen 3)
log-check
- Removed script (not reliable)
reset-to-factory-defaults-with-root
- When the -i (restore current IP address) option is specified, port forwards, static leases and the IPv6 ULA and prefix size will be restored (unless --no-forwards, --no-leases or --no-ula are specified).
safe-firmware-upgrade
- Fixed saved defaults not correctly applied
- When the -i (restore current IP address) option is specified, port forwards, static leases and the IPv6 ULA and prefix size will be restored (unless --no-forwards, --no-leases or --no-ula are specified).
Download Statistics
Contributors
UncleSam1966