L2_switching.virl

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.95" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.95/virl.xsd">
    <node name="unmanaged" type="SIMPLE" subtype="Unmanaged Switch" location="116,108">
        <interface id="0" name="link1"/>
        <interface id="1" name="link2"/>
        <interface id="2" name="link3"/>
    </node>
    <node name="managed" type="SIMPLE" subtype="IOSvL2" location="115,306">
        <extensions>
            <entry key="config" type="string">! IOSvL2 Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname managed
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
vtp domain virl.lab
vtp mode transparent
!
vlan 2
  name ank_vlan2
vlan 10
  name ank_vlan10
!
!
!
!
no cdp run
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
!
!
interface Loopback0
  description Loopback
!
interface GigabitEthernet0/0
  description OOB management
  ! Configured on launch
  no switchport
  vrf forwarding Mgmt-intf
  no ip address
  no shutdown
!
interface GigabitEthernet0/1
  description to unmanaged
  switchport access vlan 2
  switchport mode access
  no shutdown
!
interface GigabitEthernet0/2
  description to iosv-4
  switchport access vlan 2
  switchport mode access
  no shutdown
!
interface GigabitEthernet0/3
  description to iosv-3
  switchport access vlan 2
  switchport mode access
  no shutdown
!
interface GigabitEthernet1/0
  description to iosv-5
  switchport access vlan 10
  switchport mode access
  no shutdown
!
interface GigabitEthernet1/1
  description to iosv-6
  switchport access vlan 10
  switchport mode access
  no shutdown
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
        </entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet1/0"/>
        <interface id="4" name="GigabitEthernet1/1"/>
    </node>
    <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="54,39" ipv4="192.168.0.1">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-1
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.1 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to unmanaged
  ip address 10.0.0.1 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.1 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.1
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.2 remote-as 1
  neighbor 192.168.0.2 description iBGP peer iosv-2
  neighbor 192.168.0.2 update-source Loopback0
  !
  neighbor 192.168.0.3 remote-as 1
  neighbor 192.168.0.3 description iBGP peer iosv-3
  neighbor 192.168.0.3 update-source Loopback0
  !
  neighbor 192.168.0.4 remote-as 1
  neighbor 192.168.0.4 description iBGP peer iosv-4
  neighbor 192.168.0.4 update-source Loopback0
  !
  neighbor 192.168.0.5 remote-as 1
  neighbor 192.168.0.5 description iBGP peer iosv-5
  neighbor 192.168.0.5 update-source Loopback0
  !
  neighbor 192.168.0.6 remote-as 1
  neighbor 192.168.0.6 description iBGP peer iosv-6
  neighbor 192.168.0.6 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.1 mask 255.255.255.255
  neighbor 192.168.0.2 activate
  neighbor 192.168.0.3 activate
  neighbor 192.168.0.4 activate
  neighbor 192.168.0.5 activate
  neighbor 192.168.0.6 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.1" netPrefixLenV4="16"/>
    </node>
    <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="180,44" ipv4="192.168.0.2">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-2
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.2 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to unmanaged
  ip address 10.0.0.2 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.2 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.2
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.1 remote-as 1
  neighbor 192.168.0.1 description iBGP peer iosv-1
  neighbor 192.168.0.1 update-source Loopback0
  !
  neighbor 192.168.0.3 remote-as 1
  neighbor 192.168.0.3 description iBGP peer iosv-3
  neighbor 192.168.0.3 update-source Loopback0
  !
  neighbor 192.168.0.4 remote-as 1
  neighbor 192.168.0.4 description iBGP peer iosv-4
  neighbor 192.168.0.4 update-source Loopback0
  !
  neighbor 192.168.0.5 remote-as 1
  neighbor 192.168.0.5 description iBGP peer iosv-5
  neighbor 192.168.0.5 update-source Loopback0
  !
  neighbor 192.168.0.6 remote-as 1
  neighbor 192.168.0.6 description iBGP peer iosv-6
  neighbor 192.168.0.6 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.2 mask 255.255.255.255
  neighbor 192.168.0.1 activate
  neighbor 192.168.0.3 activate
  neighbor 192.168.0.4 activate
  neighbor 192.168.0.5 activate
  neighbor 192.168.0.6 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.2" netPrefixLenV4="16"/>
    </node>
    <node name="iosv-3" type="SIMPLE" subtype="IOSv" location="182,217" ipv4="192.168.0.3">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-3
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.3 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to managed
  ip address 10.0.0.3 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.3 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.3
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.1 remote-as 1
  neighbor 192.168.0.1 description iBGP peer iosv-1
  neighbor 192.168.0.1 update-source Loopback0
  !
  neighbor 192.168.0.2 remote-as 1
  neighbor 192.168.0.2 description iBGP peer iosv-2
  neighbor 192.168.0.2 update-source Loopback0
  !
  neighbor 192.168.0.4 remote-as 1
  neighbor 192.168.0.4 description iBGP peer iosv-4
  neighbor 192.168.0.4 update-source Loopback0
  !
  neighbor 192.168.0.5 remote-as 1
  neighbor 192.168.0.5 description iBGP peer iosv-5
  neighbor 192.168.0.5 update-source Loopback0
  !
  neighbor 192.168.0.6 remote-as 1
  neighbor 192.168.0.6 description iBGP peer iosv-6
  neighbor 192.168.0.6 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.3 mask 255.255.255.255
  neighbor 192.168.0.1 activate
  neighbor 192.168.0.2 activate
  neighbor 192.168.0.4 activate
  neighbor 192.168.0.5 activate
  neighbor 192.168.0.6 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.3" netPrefixLenV4="16"/>
    </node>
    <node name="iosv-4" type="SIMPLE" subtype="IOSv" location="48,214" ipv4="192.168.0.4">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-4
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.4 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to managed
  ip address 10.0.0.4 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.4 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.4
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.1 remote-as 1
  neighbor 192.168.0.1 description iBGP peer iosv-1
  neighbor 192.168.0.1 update-source Loopback0
  !
  neighbor 192.168.0.2 remote-as 1
  neighbor 192.168.0.2 description iBGP peer iosv-2
  neighbor 192.168.0.2 update-source Loopback0
  !
  neighbor 192.168.0.3 remote-as 1
  neighbor 192.168.0.3 description iBGP peer iosv-3
  neighbor 192.168.0.3 update-source Loopback0
  !
  neighbor 192.168.0.5 remote-as 1
  neighbor 192.168.0.5 description iBGP peer iosv-5
  neighbor 192.168.0.5 update-source Loopback0
  !
  neighbor 192.168.0.6 remote-as 1
  neighbor 192.168.0.6 description iBGP peer iosv-6
  neighbor 192.168.0.6 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.4 mask 255.255.255.255
  neighbor 192.168.0.1 activate
  neighbor 192.168.0.2 activate
  neighbor 192.168.0.3 activate
  neighbor 192.168.0.5 activate
  neighbor 192.168.0.6 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.4" netPrefixLenV4="16"/>
    </node>
    <node name="iosv-5" type="SIMPLE" subtype="IOSv" location="45,413" ipv4="192.168.0.5">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-5
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.5 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to managed
  ip address 10.0.0.5 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.5 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.5
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.1 remote-as 1
  neighbor 192.168.0.1 description iBGP peer iosv-1
  neighbor 192.168.0.1 update-source Loopback0
  !
  neighbor 192.168.0.2 remote-as 1
  neighbor 192.168.0.2 description iBGP peer iosv-2
  neighbor 192.168.0.2 update-source Loopback0
  !
  neighbor 192.168.0.3 remote-as 1
  neighbor 192.168.0.3 description iBGP peer iosv-3
  neighbor 192.168.0.3 update-source Loopback0
  !
  neighbor 192.168.0.4 remote-as 1
  neighbor 192.168.0.4 description iBGP peer iosv-4
  neighbor 192.168.0.4 update-source Loopback0
  !
  neighbor 192.168.0.6 remote-as 1
  neighbor 192.168.0.6 description iBGP peer iosv-6
  neighbor 192.168.0.6 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.5 mask 255.255.255.255
  neighbor 192.168.0.1 activate
  neighbor 192.168.0.2 activate
  neighbor 192.168.0.3 activate
  neighbor 192.168.0.4 activate
  neighbor 192.168.0.6 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="16">
            <extensions>
                <entry key="AutoNetkit.vlan" type="Integer">10</entry>
            </extensions>
        </interface>
    </node>
    <node name="iosv-6" type="SIMPLE" subtype="IOSv" location="180,409" ipv4="192.168.0.6">
        <extensions>
            <entry key="config" type="string">! IOS Config generated on 2017-04-06 16:24
! by autonetkit_0.23.5
!
hostname iosv-6
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
line vty 0 4
 transport input ssh telnet
 exec-timeout 720 0
 password cisco
 login local
line con 0
 password cisco
!
no cdp run
!
!
interface Loopback0
  description Loopback
  ip address 192.168.0.6 255.255.255.255
!
interface GigabitEthernet0/0
  description OOB Management
  vrf forwarding Mgmt-intf
  ! Configured on launch
  no ip address
  duplex full
  speed auto
  no shutdown
!
interface GigabitEthernet0/1
  description to managed
  ip address 10.0.0.6 255.255.0.0
  ip ospf cost 1
  duplex full
  speed auto
  no shutdown
!
!
!
router ospf 1
  network 192.168.0.6 0.0.0.0 area 0
  log-adjacency-changes
  passive-interface Loopback0
  network 10.0.0.0 0.0.255.255 area 0
!
!
router bgp 1
  bgp router-id 192.168.0.6
  no synchronization
! ibgp
  ! ibgp peers
  !
  neighbor 192.168.0.1 remote-as 1
  neighbor 192.168.0.1 description iBGP peer iosv-1
  neighbor 192.168.0.1 update-source Loopback0
  !
  neighbor 192.168.0.2 remote-as 1
  neighbor 192.168.0.2 description iBGP peer iosv-2
  neighbor 192.168.0.2 update-source Loopback0
  !
  neighbor 192.168.0.3 remote-as 1
  neighbor 192.168.0.3 description iBGP peer iosv-3
  neighbor 192.168.0.3 update-source Loopback0
  !
  neighbor 192.168.0.4 remote-as 1
  neighbor 192.168.0.4 description iBGP peer iosv-4
  neighbor 192.168.0.4 update-source Loopback0
  !
  neighbor 192.168.0.5 remote-as 1
  neighbor 192.168.0.5 description iBGP peer iosv-5
  neighbor 192.168.0.5 update-source Loopback0
!
!
 !
 address-family ipv4
  network 192.168.0.6 mask 255.255.255.255
  neighbor 192.168.0.1 activate
  neighbor 192.168.0.2 activate
  neighbor 192.168.0.3 activate
  neighbor 192.168.0.4 activate
  neighbor 192.168.0.5 activate
 exit-address-family
!
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.6" netPrefixLenV4="16">
            <extensions>
                <entry key="AutoNetkit.vlan" type="Integer">10</entry>
            </extensions>
        </interface>
    </node>
    <annotations/>
    <connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[1]/virl:interface[2]" src="/virl:topology/virl:node[4]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[2]" src="/virl:topology/virl:node[6]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[3]" src="/virl:topology/virl:node[5]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[4]" src="/virl:topology/virl:node[7]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[5]" src="/virl:topology/virl:node[8]/virl:interface[1]"/>
</topology>