Home

Welcome to the Purdue IEEE ROV team's internal wiki archive. This page is the ROV family lineage, with links to most relevant pages.

X13: ROV Triton

2019-2021, Captain Grant Geyer Qualifying Video
ROV Triton remains under development, since the competition for which it was design was delayed a full year due to COVID. Thanks to that additional time for iterative improvement and the design's high performance ceiling, Triton has the potential to be our best ROV since PotaTOS.

Mechanical (GrabCAD)

Enclosures: Power Box | Logic Tube | Solenoid Enclosure: G2, G3/VX | Secondary Camera Enclosures
Tools: Primary and Auxiliary Manipulators (PM/AM) | Pin "Yeeter" | Bottom Scraper | Surface Scraper | Tape Measure Tool
Frame | Foam | Customized Thrusters

Electrical (X12 Git | X13 Git)

X12 SID
X13 SID
"X12" Stack: Bricks Boards | Power Distribution | Power Conversion | Backplane | QuadESCs | Pi Shield | Solenoid Board | Camera Boards
"X13" Stack: Bricks Boards | Power Distribution | Power Conversion | Backplane | ESC Adapter | ESC Controller | Pi Shield | Solenoid Boards | Camera Boards

Software (X12 Git | X13 Git)

ROS
Front End

X11: ROV Remora

2018-2019, Captain Alex Ruffino Tech Report | Poster | Spec Sheet | Qualifying Video | Season Pictures

ROV Remora was a vehicle stiffled by ambition. Simultaneous changes to CAN, ROS, and pneumatics resulted in a plethora of integration issues that reduced available testing time. The ambitious Delta Power Tube was overly complex and demanded onerously tight electrical-mechanical integration for little benefit. Ultimately, X11 was operable for about 30 seconds during competition due to electrical issues and flooding of the Logic Tube.

Mechanical (GrabCAD)

Enclosures: Delta Power Tube | Logic Tube | Solenoid Enclosure G1 | Secondary Camera Enclosures
Tools: Primary Manipulator (PM) | Marker Tool | Grouter | Micro-ROV
Frame | Foam | Thruster Mounts

Electrical

SID
Boards: Backplane | ESC Boards | Power Distribution | Power Conversion | Pi Shield | Solenoid Board

Software (Git)

X10: ROV Cetacean

2017-2018, Captain Alex Ruffino Tech Report | Poster | Spec Sheet | Qualifying Video | Season Pictures

Mechanical (GrabCAD)

Enclosures: Integrated Electronics Tube | USB Hub | Secondary Camera Enclosures
Tools: Primary Manipulator (PM) | OBS Leveler | Lift Bag
Frame | Foam | Thruster Mounts

Electrical

Software (Git)

X9: ROV Cephalopod

2016-2017, Captain Kyle Rakos Tech Report | Poster | Spec Sheet | Qualifying Video | Season Pictures

Mechanical (GrabCAD)

Enclosures: Power Box | Electronics Tube | Main Camera Tube | Secondary Camera Box
Tools: Manipulator | Valve Turner | Fountain Tool | Power Connector Tool | Container Inspection Tool | Buoy | Sediment Collector | Payload Skid | Frame Positioning Tool
Frame | Foam | Thruster Mounts