main.tex

%%
%% This is file `sample-sigplan.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% samples.dtx  (with options: `all,proceedings,bibtex,sigplan')
%% 
%% IMPORTANT NOTICE:
%% 
%% For the copyright see the source file.
%% 
%% Any modified versions of this file must be renamed
%% with new filenames distinct from sample-sigplan.tex.
%% 
%% For distribution of the original source see the terms
%% for copying and modification in the file samples.dtx.
%% 
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%%
%% Commands for TeXCount
%TC:macro \cite [option:text,text]
%TC:macro \citep [option:text,text]
%TC:macro \citet [option:text,text]
%TC:envir table 0 1
%TC:envir table* 0 1
%TC:envir tabular [ignore] word
%TC:envir displaymath 0 word
%TC:envir math 0 word
%TC:envir comment 0 0
%%
%%
%% The first command in your LaTeX source must be the \documentclass
%% command.
%%
%% For submission and review of your manuscript please change the
%% command to \documentclass[manuscript, screen, review]{acmart}.
%%
%% When submitting camera ready or to TAPS, please change the command
%% to \documentclass[sigconf]{acmart} or whichever template is required
%% for your publication.
%%
%%
\documentclass[manuscript,review,screen,nonacm,sigplan]{acmart}

%%
%% \BibTeX command to typeset BibTeX logo in the docs
\AtBeginDocument{%
  \providecommand\BibTeX{{%
    Bib\TeX}}}

%% Rights management information.  This information is sent to you
%% when you complete the rights form.  These commands have SAMPLE
%% values in them; it is your responsibility as an author to replace
%% the commands and values with those provided to you when you
%% complete the rights form.
% \setcopyright{acmlicensed}
% \copyrightyear{2024}
% \acmYear{2024}
% \acmDOI{XXXXXXX.XXXXXXX}

%% These commands are for a PROCEEDINGS abstract or paper.
% \acmConference[APLAS '24 Stundent Research Competition]{Make sure to enter the correct
%   conference title from your rights confirmation emai}{October 22--25,
%   2024}{Kyoto, Japan}
%%
%%  Uncomment \acmBooktitle if the title of the proceedings is different
%%  from ``Proceedings of ...''!
%%
%%\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection,
%%  June 03--05, 2018, Woodstock, NY}
% \acmISBN{978-1-4503-XXXX-X/18/06}


%%
%% Submission ID.
%% Use this when submitting an article to a sponsored event. You'll
%% receive a unique submission ID from the organizers
%% of the event, and this ID should be used as the parameter to this command.
%%\acmSubmissionID{123-A56-BU3}

%%
%% For managing citations, it is recommended to use bibliography
%% files in BibTeX format.
%%
%% You can then either use BibTeX with the ACM-Reference-Format style,
%% or BibLaTeX with the acmnumeric or acmauthoryear sytles, that include
%% support for advanced citation of software artefact from the
%% biblatex-software package, also separately available on CTAN.
%%
%% Look at the sample-*-biblatex.tex files for templates showcasing
%% the biblatex styles.
%%

%%
%% The majority of ACM publications use numbered citations and
%% references.  The command \citestyle{authoryear} switches to the\begin{teaserfigure}
%   % \includegraphics[width=\textwidth]{sampleteaser}
%   \caption{Seattle Mariners at Spring Training, 2010.}
%   \Description{Enjoying the baseball game from the third-base
%   seats. Ichiro Suzuki preparing to bat.}
%   \label{fig:teaser}
% \end{teaserfigure}
%% "author year" style.
%%
%% If you are preparing content for an event
%% sponsored by ACM SIGGRAPH, you must use the "author year" style of
%% citations and references.
%% Uncommenting
%% the next command will enable that style.
%%\citestyle{acmauthoryear}

\usepackage{amsmath}
\usepackage{amsthm}
\usepackage{comment}
\usepackage{amsthm}
\usepackage{xcolor}
\usepackage{bussproofs}

%%%% macros to add comments
\newif\ifdraftComments
\draftCommentsfalse
\def\mkDraftFn#1#2{%
  \expandafter\def\csname #1\endcsname##1{\ifdraftComments\textcolor{#2}{[#1: ##1]}\marginpar[$\longrightarrow$]{$\longleftarrow$}\fi}%
}
\mkDraftFn{HM}{orange}
\mkDraftFn{YC}{blue}
\mkDraftFn{YT}{red}

\draftCommentstrue

%%
%% end of the preamble, start of the body of the document source.
\begin{document}

%%
%% The "title" command has an optional parameter,
%% allowing the author to define a "short title" to be used in page headers.
\title{The Name of the Title Is Hope}

%%
%% The "author" command and its associated commands are used to define
%% the authors and their affiliations.
%% Of note is the shared affiliation of the first two authors, and the
%% "authornote" and "authornotemark" commands
%% used to denote shared contribution to the research.

\author{Your Name}
\orcid{If you don't have orcid, please get one.}
\email{your_address@prg,is.titech.ac.jp}
\affiliation{%
  \institution{Tokyo Institute of Technology\\(Institute of Science Tokyo from October 2024)}
  \city{Tokyo}
  \country{Japan}
}

\author{Youyou Cong}
\orcid{0000-0003-2315-6182}
\email{cong@c.titech.ac.jp}
\affiliation{%
  \institution{Tokyo Institute of Technology\\(Institute of Science Tokyo from October 2024)}
  \city{Tokyo}
  \country{Japan}
}

\author{Yudai Tanabe}
\email{yudaitnb@prg.is.titech.ac.jp}
\orcid{0000-0002-7990-0989}
\affiliation{%
  \institution{Tokyo Institute of Technology\\(Institute of Science Tokyo from October 2024)}
  \city{Tokyo}
  \country{Japan}
}

\author{Hidehiko Masuhara}
\orcid{0000-0002-8837-5303}
\email{masuhara@acm.org}
\affiliation{%
  \institution{Tokyo Institute of Technology\\(Institute of Science Tokyo from October 2024)}
  \city{Tokyo}
  \country{Japan}
}

%%
%% By default, the full list of authors will be used in the page
%% headers. Often, this list is too long, and will overlap
%% other information printed in the page headers. This command allows
%% the author to define a more concise list
%% of authors' names for this purpose.
\renewcommand{\shortauthors}{Yout family name et al.}

%%
%% The abstract is a short summary of the work to be presented in the
%% article.
\begin{abstract}
\HM{Write the contents!}
% A clear and well-documented \LaTeX\ document is presented as an
% article formatted for publication by ACM in a conference proceedings
% or journal publication. Based on the ``acmart'' document class, this
% article presents and explains many of the common variations, as well
% as many of the formatting elements an author may use in the
% preparation of the documentation of their work.
\end{abstract}

%%
%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm.
%% Please copy and paste the code instead of the example below.
%%
\begin{CCSXML}
\end{CCSXML}

\ccsdesc[500]{Software and its engineering~Object oriented languages}

%%
%% Keywords. The author(s) should pick words that accurately describe
%% the work being presented. Separate the keywords with commas.
\keywords{keyword1, keyword2, ...}
%% A "teaser" image appears between the author and affiliation
%% information and the body of the document, and typically spans the
%% page.
% \begin{teaserfigure}
%   % \includegraphics[width=\textwidth]{sampleteaser}
%   \caption{Seattle Mariners at Spring Training, 2010.}
%   \Description{Enjoying the baseball game from the third-base
%   seats. Ichiro Suzuki preparing to bat.}
%   \label{fig:teaser}
% \end{teaserfigure}

% \received{20 February 2007}
% \received[revised]{12 March 2009}
% \received[accepted]{5 June 2009}

%%
%% This command processes the author and affiliation and title
%% information and builds the first part of the formatted document.
\maketitle

\section{Introduction}
\section{Background}
\section{Method}
\section{Evaluation}
\section{Related Work}
\section{Contribution}

%%
%% The acknowledgments section is defined using the "acks" environment
%% (and NOT an unnumbered section). This ensures the proper
%% identification of the section in the article metadata, and the
%% consistent spelling of the heading.
\begin{acks}
  The author would like to thank ...
\end{acks}

%%
%% The next two lines define the bibliography style to be used, and
%% the bibliography file.
\bibliographystyle{ACM-Reference-Format}
\bibliography{sample-base}


%%
%% If your work has an appendix, this is the place to put it.
\appendix

\section{Research Methods}

\subsection{Part One}

\subsection{Part Two}

\end{document}
\endinput
%%
%% End of file `sample-sigplan.tex'.