attribute_types_oppowervm.xml

<!-- IBM_PROLOG_BEGIN_TAG                                                   -->
<!-- This is an automatically generated prolog.                             -->
<!--                                                                        -->
<!-- $Source: src/usr/targeting/common/xmltohb/attribute_types_oppowervm.xml $ -->
<!--                                                                        -->
<!-- OpenPOWER HostBoot Project                                             -->
<!--                                                                        -->
<!-- Contributors Listed Below - COPYRIGHT 2016                             -->
<!-- [+] International Business Machines Corp.                              -->
<!--                                                                        -->
<!--                                                                        -->
<!-- Licensed under the Apache License, Version 2.0 (the "License");        -->
<!-- you may not use this file except in compliance with the License.       -->
<!-- You may obtain a copy of the License at                                -->
<!--                                                                        -->
<!--     http://www.apache.org/licenses/LICENSE-2.0                         -->
<!--                                                                        -->
<!-- Unless required by applicable law or agreed to in writing, software    -->
<!-- distributed under the License is distributed on an "AS IS" BASIS,      -->
<!-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        -->
<!-- implied. See the License for the specific language governing           -->
<!-- permissions and limitations under the License.                         -->
<!--                                                                        -->
<!-- IBM_PROLOG_END_TAG                                                     -->
<attributes>

<!-- =====================================================================
     Contains the definition of attributes that are only available on
     openpower systems for a PowerVM build.  This file is only compiled when
     CONFIG_XML_INCLUDE_OPPOWERVM is set to true and is always false on
     FSP based systems.
     =====================================================================
-->

<attribute>
    <id>PROC_HW_TOPOLOGY</id>
    <description>Hardware topology for HDAT
        creator:MRW
        consumer:HDAT
        firmware notes:
        Hardware Topology 2 Bytes
        Byte 1:
            bit 0-3: Node Id
            bit 4-7: Socket id inside the node
            bit 8-11: Proc id inside socket
            bit 12-15:Hub Id inside proc
    </description>
    <simpleType>
        <uint16_t>
        </uint16_t>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
</attribute>

<enumerationType>
    <id>CHIP_VER</id>
    <description>Enumeration indicating the chip version</description>
    <enumerator>
        <name>DD10</name>
        <value>0x10</value>
    </enumerator>
    <enumerator>
        <name>DD11</name>
        <value>0x11</value>
    </enumerator>
    <enumerator>
        <name>DD20</name>
        <value>0x20</value>
    </enumerator>
    <enumerator>
        <name>DD21</name>
        <value>0x21</value>
    </enumerator>
    <default>DD10</default>
</enumerationType>

<enumerationType>
    <id>HW_VER</id>
    <description>Enumeration indicating the chip HW version</description>
    <enumerator>
        <name>FSP_HW_VER</name>
        <value>0x2</value>
    </enumerator>
    <enumerator>
        <name>BMC_HW_VER</name>
        <value>0x3</value>
    </enumerator>
    <default>BMC_HW_VER</default>
</enumerationType>

<enumerationType>
    <id>SW_VER</id>
    <description>Enumeration indicating the SW version</description>
    <enumerator>
        <name>FSP_SW_VER</name>
        <value>0x1</value>
    </enumerator>
    <enumerator>
        <name>BMC_SW_VER</name>
        <value>0x2</value>
    </enumerator>
    <default>BMC_SW_VER</default>
</enumerationType>

<enumerationType>
    <id>ROLE</id>
    <description>Enumeration indicating the master's FSI type</description>
    <enumerator>
        <name>PRIMARY</name>
        <value>1</value>
    </enumerator>
    <enumerator>
        <name>BACKUP</name>
        <value>0</value>
    </enumerator>
    <default>PRIMARY</default>
</enumerationType>

<attribute>
    <id>CHIP_VER</id>
    <description>Attribute indicating the target's chip version</description>
    <simpleType>
        <enumeration>
            <id>CHIP_VER</id>
        </enumeration>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <hasStringConversion/>
</attribute>

<attribute>
    <id>HW_VER</id>
    <description>Attribute indicating the target's hw version</description>
    <simpleType>
        <enumeration>
            <id>HW_VER</id>
        </enumeration>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <hasStringConversion/>
</attribute>

<attribute>
    <id>SW_VER</id>
    <description>Attribute indicating the target's software version</description>
    <simpleType>
        <enumeration>
            <id>SW_VER</id>
        </enumeration>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <hasStringConversion/>
</attribute>

<attribute>
    <id>ROLE</id>
    <description>Attribute indicating the target's role</description>
    <simpleType>
        <enumeration>
            <id>ROLE</id>
        </enumeration>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <hasStringConversion/>
</attribute>

<attribute>
    <id>PHYP_SYSTEM_TYPE</id>
    <description>PHYP system type value for habanero
            and barreleye (0x3015 and 0x3016 respectively).
            The value is updated in the system xml.
    </description>
    <simpleType>
        <uint32_t>
        </uint32_t>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>ASCII_VPD_LX_KEYWORD</id>
    <description>LX keyword VPD data for HDAT module
    </description>
    <simpleType>
        <uint64_t>
        </uint64_t>
    </simpleType>
    <persistency>non-volatile</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>ENLARGED_IO_SLOT_COUNT</id>
    <description>
        User configuration for Enlarged IO SLot Count
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>CREATE_DEF_PARTITION</id>
    <description>
        User configuration for creating default partition
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
   <id>IPL_ATTRIBUTES</id>
   <description>
       Assorted list of differnt IPL attributes passed via HDAT
   </description>
   <complexType>
        <description>struct - 8 booleans </description>
        <field>
            <name>createDefaultPartition</name>
            <description>
             0b0: Dont create default partition;
             0b1: Create default partition;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>clickToAcceptState</name>
            <description>
             0b0: Customer has not accepted license agreement;
             0b1: Customer has accepted license agreement;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>disableVirtIO</name>
            <description>
             0b0: Enable Virtual IO Connections between partitions;
             0b1: Disable Virtual IO Connections between partitions;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>resetPCINumbers</name>
            <description>
             0b0: Do not reset PCI Numbers;
             0b1: Reset PCI Numbers;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>clearHypNVRAM</name>
            <description>
             0b0: Do not clear HYP NVRAM;
             0b1: Clear HYP NVRAM;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>deleteHYPSELs</name>
            <description>
             0b0: Do not delete SELs originating from HYP;
             0b1: Delete SELs originating from HYP;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>deleteHBSELs</name>
            <description>
             0b0: Do not delete SELs originating from Hostboot;
             0b1: Delete SELs originating from Hostboot;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
        <field>
            <name>deleteBMCSELs</name>
            <description>
             0b0: Do not delete SELs originating from BMC;
             0b1: Delete SELs originating from BMC;
            </description>
            <type>uint8_t</type>
            <bits>1</bits>
            <default>0</default>
        </field>
   </complexType>
   <persistency>volatile-zeroed</persistency>
   <readable/>
   <writeable/>
</attribute>

<attribute>
    <id>PRESERVE_MDC_PARTITION_VPD</id>
    <description>
        MFG setting to preserve MDC partition vpd
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>HYPERVISOR_IPL_SIDE</id>
    <description>
       Platform IPL Side
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>OS_IPL_MODE</id>
    <description>
       Operating System IPL Mode
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>LMB_SIZE</id>
    <description>
       Logical Memory Block Size
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>MAX_HSL_OPTICONNECT_CONNECTIONS</id>
    <description>
        User configuration for max HSL Opticonnect connections
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>HUGE_PAGE_COUNT</id>
    <description>
       Huge Memory Page Count
    </description>
    <simpleType>
        <uint16_t>
        </uint16_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>HUGE_PAGE_SIZE</id>
    <description>
       Huge Memory Page Size
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>VLAN_SWITCHES</id>
    <description>
       Number of VLAN Switches
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>VTPM_ENABLED</id>
    <description>
       Virtual TPM Enabled
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>HYPERVISOR_IPL_DESTINATION</id>
    <description>
      Hypervisor IPL Destination
    </description>
    <simpleType>
    <uint8_t>
    </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>HYP_DISPATCH_WHEEL</id>
    <description>
       Hypervisor Dispatch Wheel
    </description>
    <simpleType>
        <uint8_t>
        </uint8_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>SYSTEM_BRAND_NAME</id>
    <description>
       Brand Name of OEM systems
    </description>
    <simpleType>
     <string>
        <sizeInclNull>64</sizeInclNull>
     </string>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>SLCA_INDEX</id>
    <description>
       SLCA index for this FRU
    </description>
    <simpleType>
        <uint32_t>
        </uint32_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

<attribute>
    <id>SLCA_RID</id>
    <description>
       SLCA RID for this FRU
    </description>
    <simpleType>
        <uint32_t>
        </uint32_t>
    </simpleType>
    <persistency>volatile-zeroed</persistency>
    <readable/>
    <writeable/>
</attribute>

</attributes>