[Bug]: Charging Flag False when it should be true.

[vlturner]

Category

Other

Hardware

Heltec Wireless Tracker

Firmware Version

2.5.20

Description

I can see the unit charging on the web interface while usb cable is plugged in over time but the USB flag & charging flag is showing false. Also consider adding release to the JSON report Full Release ID is missing in the apps.

Relevant log output

{"data":{"airtime":{"channel_utilization":1.66833329200745,"periods_to_log":8,"rx_all_log":[0,0,0,0,0,0,0,0],"rx_log":[0,0,0,0,0,0,0,0],"seconds_per_period":3600,"seconds_since_boot":59846,"tx_log":[10522,12764,16228,12788,2742,10407,7551,12951],"utilization_tx":0.415388882160187},"device":{"reboot_counter":101},"memory":{"fs_free":1019904,"fs_total":1048576,"fs_used":28672,"heap_free":64864,"heap_total":261712,"psram_free":0,"psram_total":0},"power":{"battery_percent":49,"battery_voltage_mv":3717,"has_battery":"true","has_usb":"false","is_charging":"false"},"radio":{"frequency":906.875,"lora_channel":20},"wifi":{"ip":"192.168.0.11","rssi":-15}},"status":"ok"}

[fifieldt]

Thanks for writing in. Can I confirm by "see the unit charging", you're seeing the charging icon in the web interface or through the app? However, the MQTT Json content shows the wrong values?

[vlturner]

Yes the weird thing is now that it hit 100% it changed them, but during charging it doesn’t say connected or charging, but you see the battery charge growing. {"data":{"airtime":{"channel_utilization":0,"periods_to_log":8,"rx_all_log":[0,0,0,0,0,0,0,0],"rx_log":[0,0,0,0,0,0,0,0],"seconds_per_period":3600,"seconds_since_boot":77276,"tx_log":[5911,11294,22209,19822,17571,12877,15298,18662],"utilization_tx":0.291888892650604},"device":{"reboot_counter":103},"memory":{"fs_free":1019904,"fs_total":1048576,"fs_used":28672,"heap_free":74892,"heap_total":264176,"psram_free":0,"psram_total":0},"power":{"battery_percent":100,"battery_voltage_mv":4296,"has_battery":"true","has_usb":"true","is_charging":"true"},"radio":{"frequency":906.875,"lora_channel":20},"wifi":{"ip":"192.168.0.11","rssi":-2}},"status":"ok"} From: Tom Fifield ***@***.***> Sent: Saturday, February 1, 2025 6:37 PM To: meshtastic/firmware ***@***.***> Cc: vlturner ***@***.***>; Author ***@***.***> Subject: Re: [meshtastic/firmware] [Bug]: Charging Flag False when it should be true. (Issue #5974) Thanks for writing in. Can I confirm by "see the unit charging", you're seeing the charging icon in the web interface or through the app? However, the MQTT Json content shows the wrong values? — Reply to this email directly, view it on GitHub <#5974 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJCQVEA324CHLHLMODCCDKD2NWAGBAVCNFSM6AAAAABWJROEYGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRZGIYTENJYGU> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AJCQVEH3XXT7Q42R3FR5EUL2NWAGBA5CNFSM6AAAAABWJROEYGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTU4W2M2S.gif> Message ID: ***@***.*** ***@***.***> >