ELTAKO FSR61 8-24

[pphil78]

Hello, first of all, thank for this good job.
I've installed ha_enoceanmqtt_dev 0.1.25.
My temp sensors are well supported (Nodon EEP A5-02-05). ELTAKO FAFT60 (EEP A5-04-02) is also OK.
Smoke detector ELTAKO FRW (EEP F6-02-02) seems to be well supported.
I also have one ELTAKO FSR61 (EEP F6-02-02) but I can see only sensor entity but no switch entity. Is it normal? how is it possible to send command? Philippe

[mak-gitdev]

Hi @pphil78,

In fact, your FSR61 uses two EEP, one for status (F6-02-01 or F6-02-02) and one for control A5-38-08 (Command 1).
As A5-38-08 command 1 is supported, you should add a new device with this EEP in addition to the one used for status. I don't know if the address for the control device is the same as the one for the status.

In general, Eltako devices are not well supported at the moment because they are mainly non-standard EnOcean devices.
I have work to do as can be seen in the To Do list in #17.

[pphil78]

Hi @mak-gitdev ,
Thanks for your prompt answer. I've tried and it does not work, no reaction of FSR61.
I've a log of jeedom when I send a command to FSR61, perhaps it can help. FSR61 address is 01:9E:C7:C9

[2023-02-21 19:33:37.457][DEBUG] : Received command from jeedom : send
[2023-02-21 19:33:37.457][DEBUG] : Send command
[2023-02-21 19:33:37.457][DEBUG] : {'R1': 0, 'T21': 1, 'NU': 1} on command None 246 2 2
[2023-02-21 19:33:37.457][DEBUG] : Replacing destination with broadcast address.
[2023-02-21 19:33:37.457][DEBUG] : [85, 0, 7, 7, 1, 122, 246, 16, 1, 158, 199, 201, 48, 3, 255, 255, 255, 255, 255, 0, 237]
[2023-02-21 19:33:37.457][DEBUG] : Replacing destination with broadcast address.
[2023-02-21 19:33:37.457][DEBUG] : [85, 0, 7, 7, 1, 122, 246, 0, 1, 158, 199, 201, 48, 3, 255, 255, 255, 255, 255, 0, 146]
[2023-02-21 19:33:37.458][DEBUG] : Last packet for this Broadcast was emited 0.0003418922424316406 seconds ago
[2023-02-21 19:33:37.458][DEBUG] : Waiting Response
[2023-02-21 19:33:37.508][DEBUG] : Waiting Response
[2023-02-21 19:33:37.517][INFO] : Sending packet
[2023-02-21 19:33:37.517][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x10', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.537][INFO] : Sending packet
[2023-02-21 19:33:37.537][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x10', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.557][INFO] : Sending packet
[2023-02-21 19:33:37.558][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x10', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.558][DEBUG] : Waiting Response
[2023-02-21 19:33:37.578][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.578][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.579][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.579][DEBUG] : Response is : OK
[2023-02-21 19:33:37.579][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.579][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.599][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.599][DEBUG] : Response is : OK
[2023-02-21 19:33:37.679][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.679][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.679][INFO] : Sending packet
[2023-02-21 19:33:37.680][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x0', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.680][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.680][DEBUG] : Response is : OK
[2023-02-21 19:33:37.700][INFO] : Sending packet
[2023-02-21 19:33:37.700][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x0', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.721][INFO] : Sending packet
[2023-02-21 19:33:37.721][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-255 dBm): 0x01 ['0xf6', '0x0', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x3', '0xff', '0xff', '0xff', '0xff', '0xff', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
[2023-02-21 19:33:37.741][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.742][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.742][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.742][DEBUG] : Response is : OK
[2023-02-21 19:33:37.742][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.742][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.759][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2023-02-21 19:33:37.759][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2023-02-21 19:33:37.762][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.762][DEBUG] : Response is : OK
[2023-02-21 19:33:37.783][DEBUG] : Receive response packet : 2
[2023-02-21 19:33:37.783][DEBUG] : Response is : OK
[2023-02-21 19:33:37.859][DEBUG] : [85, 0, 7, 7, 1, 122, 246, 112, 1, 158, 199, 201, 48, 1, 255, 255, 255, 255, 74, 0, 95]
[2023-02-21 19:33:37.860][DEBUG] : 01:9E:C7:C9->FF:FF:FF:FF (-74 dBm): 0x01 ['0xf6', '0x70', '0x1', '0x9e', '0xc7', '0xc9', '0x30'] ['0x1', '0xff', '0xff', '0xff', '0xff', '0x4a', '0x0'] OrderedDict()
[2023-02-21 19:33:37.860][DEBUG] : Message is repeated 0 times
[2023-02-21 19:33:37.860][DEBUG] : {'id': '019EC7C9', 'rorg': 'f6', 'packet_type': '1', 'dBm': '-74', 'func': '02', 'type': '02', 'repeat': '0', 'destination': 'FFFFFFFF', 'manufacturer': '000', 'cmd': None}
[2023-02-21 19:33:37.860][DEBUG] : Parsing Packet
[2023-02-21 19:33:37.860][DEBUG] : Its a RPS message
[2023-02-21 19:33:37.861][DEBUG] : Decode data : {"id": "019EC7C9", "rorg": "f6", "packet_type": "1", "dBm": "-74", "func": "02", "type": "02", "repeat": "0", "destination": "FFFFFFFF", "manufacturer": "000", "cmd": null, "R1": {"description": "Rocker 1st action", "unit": "", "value": "Button BO", "raw_value": 3}, "EB": {"description": "Energy bow", "unit": "", "value": "pressed", "raw_value": 1}, "R2": {"description": "Rocker 2nd action", "unit": "", "value": "Button AI", "raw_value": 0}, "SA": {"description": "2nd action", "unit": "", "value": "No 2nd action", "raw_value": 0}, "T21": {"description": "T21", "unit": "", "value": true, "raw_value": 1}, "NU": {"description": "NU", "unit": "", "value": true, "raw_value": 1}, "bt_2": "toggle"}
[2023-02-21 19:33:38.043][DEBUG] : Send to jeedom : {'devices': {'019EC7C9': {'id': '019EC7C9', 'rorg': 'f6', 'packet_type': '1', 'dBm': '-74', 'func': '02', 'type': '02', 'repeat': '0', 'destination': 'FFFFFFFF', 'manufacturer': '000', 'cmd': None, 'R1': {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BO', 'raw_value': 3}, 'EB': {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}, 'R2': {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}, 'SA': {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}, 'T21': {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}, 'NU': {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1}, 'bt_2': 'toggle'}}}
[2023-02-21 19:33:38.044][DEBUG] : Starting new HTTPS connection (1): 127.0.0.1:443

[mak-gitdev]

I think Jeedom uses a virtual switch to control your device, while my previous proposal allows to directly control it.
Both should be possible starting from version 0.1.24.

Are you using the same USB300 for Jeedom and Home Assistant ?
If not, is your HA USB300 paired with your FSR61 ? This is mandatory to allow your HA USB300 to control it.

Have a look at this reply from @apromix for more details on direct control of Eltako devices.
For virtual switch, have a look at this wiki page.

[pphil78]

Yes, I use the same USB300 for JEEDOM and HA.
I have 1 VBox JEEDOM et 1 VBOX HA on the same NUC and I try to move ENOCEAN from JEEDOM to HA.
Philippe

[pphil78]

Hello @mak-gitdev, thanks a lot, it's OK, It works fine with a virtual.