diff --git a/cues/audienceEnters.scd b/cues/audienceEnters.scd
index cab4528..3cbadb4 100644
--- a/cues/audienceEnters.scd
+++ b/cues/audienceEnters.scd
@@ -35,19 +35,13 @@
             ~ch[\heartbeat].set( \attack, 240, \gate, 1, \rel, 30);
             ~ch[\mic0].set(\gate, 0);
             ~ch[\mic1].set(\gate, 0);
-            ~ch[\mic2].set(\lvlin, 0.dbamp, \lvlout, 0.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
-            ~ch[\mic3].set(\lvlin, 0.dbamp, \lvlout, 0.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
+            ~ch[\mic2].set(\lvlout, -3.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
+            ~ch[\mic3].set(\lvlout, -3.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
 
             Pdef(\heartbeat).play(TempoClock(0.8));
 
             Pdef(\nasaBeginning).play;
 
-            // s.record(
-            //     ~projectfolder++"/audio/live/audience.wav", 
-            //     bus: ~inBus, 
-            //     numChannels: 2
-            // );
-
         }.play;
     };
 )
diff --git a/cues/beaverRise.scd b/cues/beaverRise.scd
index e6d8d14..9412d44 100644
--- a/cues/beaverRise.scd
+++ b/cues/beaverRise.scd
@@ -24,8 +24,8 @@
             Pdef(\school_yard_fadein).stop;
             Pdef(\fastNonRythmical).stop;
             Pdef(\fastFirst).play;
-            ~ch[\mic2].set(\lvlin, -3.dbamp, \lvlout, 0.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -30.dbamp, \gate, 1);
-            ~ch[\mic3].set(\lvlin, -3.dbamp, \lvlout, 0.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -30.dbamp, \gate, 1);
+            ~ch[\mic2].set(\lvlout, -3.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -30.dbamp, \gate, 1);
+            ~ch[\mic3].set(\lvlout, -3.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -30.dbamp, \gate, 1);
 
             90.wait;
 
diff --git a/cues/crunchyImpro.scd b/cues/crunchyImpro.scd
index b83adf5..548432e 100644
--- a/cues/crunchyImpro.scd
+++ b/cues/crunchyImpro.scd
@@ -27,7 +27,7 @@
 
         // Backup when no sensors
         // Pdef(\sineGrainTrain).play;
-        // Pdef(\emSolo).stop;
+        Pdef(\emSolo).stop;
 
         fork{
             10.do{|i|
diff --git a/cues/darkness.scd b/cues/darkness.scd
index 0262cc6..3fff7f3 100644
--- a/cues/darkness.scd
+++ b/cues/darkness.scd
@@ -2,12 +2,14 @@
     {
         ~darknesscue = Routine {
 
+            var miclevel = -7.dbamp;
+
             "darkness".postln;
 
-            ~ch[\mic0].set(\lvlin, -3.dbamp, \lvlout, -0.dbamp, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 150, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //külli
-            ~ch[\mic1].set(\lvlin, -3.dbamp, \lvlout, -0.dbamp, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 150, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //rakesh
-            ~ch[\mic2].set(\lvlin, -3.dbamp, \lvlout, -0.dbamp, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 150, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //kenneth
-            ~ch[\mic3].set(\lvlin, -3.dbamp, \lvlout, -0.dbamp, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 150, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //isabell
+            ~ch[\mic0].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //külli
+            ~ch[\mic1].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //rakesh
+            ~ch[\mic2].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //kenneth
+            ~ch[\mic3].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //isabell
 
             [9, 12].do{|id, idx| ~deltaTriggers[\water][idx].release(1)}; //Isabell sensor off
             Pdef(\heartbeatLo).play(TempoClock(0.8));
@@ -15,15 +17,43 @@
 
             20.wait;
 
-            ~whispersynth = Synth(\cleanCirclePanGate, [\out, ~bus[\master], \buf, ~buffers[\translateEstonian][0], \amp, 9.dbamp, \hipassfreq, 400, \da, 2, \loop, 1, \rate, -1, \rel, 420]);
+            ~whispersynth = Synth(\cleanCirclePanGate, [
+                \out, ~bus[\master], 
+                \buf, ~buffers[\translateEstonian][0], 
+                \amp, -3.dbamp, 
+                \hipassfreq, 400, 
+                \da, 2, 
+                \loop, 1, 
+                \rate, -1, 
+                \rel, 420
+            ]);
 
             70.wait;
 
             if(~hasLaunchpad) {
                 ~launchpadOut.control(176, 0, 0);
                 MIDIdef.freeAll;
-                MIDIdef.noteOn(\text, {Tdef(\writetext).play; MIDIdef.noteOn(\text, {})}, chan: 0);
-            }
+                MIDIdef.noteOn(\text, {
+                    Tdef(\writetext).play; 
+                    Synth(\fm, [
+                        \carfreq, 52,
+                        \modfreq, 50,
+                        \moddepth, 4,
+                        \attack, 20, 
+                        \release, 200,
+                        \amp, -55.dbamp,
+                        \out, ~bus[\master],
+                    ]); 
+                    // Synth(\clean_circle_pan, [
+                    //     \buf, ~buffers[\nasa][4],
+                    //     \attack, 10,
+                    //     \release, 80,
+                    //     \amp, -26.dbamp,
+                    //     \panspeed, 0.03,
+                    // ]);
+                    MIDIdef.noteOn(\text, {})
+                }, chan: 0);
+            };
         }.play;
     }
 )
diff --git a/cues/heartdialog.scd b/cues/heartdialog.scd
index 66bc4fa..48e7e66 100644
--- a/cues/heartdialog.scd
+++ b/cues/heartdialog.scd
@@ -42,12 +42,13 @@
             "Rakesh solo".postln;
             ~deltaTriggers[\emIDs].do{|id, idx| ~deltaTriggers[\em][idx].play(out: ~bus[\em])};
             // Backup when no sensor
-            // Pdef(\emSolo).play;
+            Pdef(\emSolo).play;
 
             "Kenneth mics on, prepare for song".postln;
 
             ~ch[\grdelayLong].set(\fb, 0.6);
-            ~ch[\mic2].set(\gate, 1, \lvlin, -6.dbamp, \lvlout, -0.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -10.dbamp, \fx3lvl, 0.dbamp, \hishelffreq, 500, \hishelfdb, -3);
+            ~ch[\mic2].set(\gate, 1, \lvlout, -14.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -10.dbamp, \fx3lvl, 0.dbamp, \hishelffreq, 500, \hishelfdb, -3);
+
             60.wait;
 
             Pdef(\tens).stop;
diff --git a/cues/swirl.scd b/cues/swirl.scd
index ee0dda0..4024333 100644
--- a/cues/swirl.scd
+++ b/cues/swirl.scd
@@ -3,7 +3,7 @@
         ~swirlcue = Routine {
 
             "Swirl".postln;
-            ~ch[\heartbeat].set(\gate, 0, \attack, 100, \rel, 120, \amp, -7.dbamp);
+            ~ch[\heartbeat].set(\gate, 0, \attack, 80, \rel, 120, \amp, -7.dbamp);
             //Külli sensors off
             [10, 11].do{|id, idx| ~deltaTriggers[\sineGrain][idx].release(1) };
 
diff --git a/init.scd b/init.scd
index 5300b0e..bdcf767 100644
--- a/init.scd
+++ b/init.scd
@@ -1,8 +1,8 @@
 (
     ~projectfolder = "/home/kf/sc/primemover/";
-    ~numSpeakers = 4;
+    ~numSpeakers = 3;
     ~numMics = 4;
-    ~numSubs = 2;
+    ~numSubs = 1;
     ~micOffset = 4;
     ~subBus = ~numSpeakers;
     ~hasLaunchpad = false;
@@ -48,8 +48,9 @@
                     Buffer.readChannel(s, file.fullPath, channels: 0);
                 }));
             });
-            "Buffers read".postln;
+            "Reading buffers...".postln;
             s.sync;
+            "Buffers read".postln;
 
             //set up groups
             this.executeFile((~projectfolder++"groups.scd").standardizePath);
diff --git a/minibee/mbDeltaTrigs.scd b/minibee/mbDeltaTrigs.scd
index 255c75f..7fe8e53 100644
--- a/minibee/mbDeltaTrigs.scd
+++ b/minibee/mbDeltaTrigs.scd
@@ -10,8 +10,8 @@
                 speedlim: 0.5, 
                 threshold: 0.1, 
                 minibeeID: id,
-                minAmp: -38.dbamp, 
-                maxAmp: -9.dbamp,
+                minAmp: -68.dbamp, 
+                maxAmp: -3.dbamp,
                 function: {|outbus, dt, minAmp, maxAmp|
                     Synth(\clean, 
                         [
@@ -22,14 +22,14 @@
                             \pan, rrand(-1.0, 1.0), 
                             \rate, rrand(0.5, 1.2),
                             \ratio, 4,
-                            \hishelfdb, -6,
+                            \hishelfdb, -9,
                             \out, outbus,
                             \fx1, ~bus[\jpverb], 
-                            \fx1lvl, rrand(-12, 0).dbamp,
+                            \fx1lvl, rrand(-22, -3).dbamp,
                             \fx2, ~bus[\grdelayMedium], 
-                            \fx2lvl, rrand(-24, -12).dbamp,
+                            \fx2lvl, rrand(-24, -15).dbamp,
                             \fx3, ~bus[\grdelayLong], 
-                            \fx3lvl, rrand(-24, -12).dbamp,
+                            \fx3lvl, rrand(-24, -15).dbamp,
                         ], 
                         ~group[\instr]
                     );
@@ -45,7 +45,7 @@
                 speedlim: 0.5, 
                 threshold: 0.1,
                 minibeeID: id,
-                minAmp: -26.dbamp, 
+                minAmp: -46.dbamp, 
                 maxAmp: 8.dbamp,
                 function: { |outbus, dt, minAmp, maxAmp|
                     var release = dt.linlin(0.0, 1.0, 3.0, 5.0);
@@ -80,7 +80,7 @@
                 threshold: 0.07, 
                 minibeeID: id, 
                 minAmp: -60.dbamp, 
-                maxAmp: -43.dbamp,
+                maxAmp: -40.dbamp,
                 function: { |outbus, dt, minAmp, maxAmp|
                     Synth(\sineGrainTrain,
                         [
diff --git a/patterns/em.scd b/patterns/em.scd
index 1d96ff7..280acf0 100644
--- a/patterns/em.scd
+++ b/patterns/em.scd
@@ -42,8 +42,8 @@
             \instrument, \clean,
             \buf, Prand(~buffers[\em], inf),
             \group, ~group[\instr],
-            \db, Pwhite(-20, -6),
-            \dur, Pexprand(0.5, 8.0),
+            \db, Pwhite(-20, -2).trace,
+            \dur, Pexprand(0.8, 8.0),
             \rel, Pkey(\dur),
             \attack, Pkey(\dur) * 0.3,
             \rate, Pexprand(0.25, 0.75),
@@ -56,3 +56,5 @@
         )
     );
 )
+
+
diff --git a/patterns/fmdrone.scd b/patterns/fmdrone.scd
index f226dc1..7b6dcc0 100644
--- a/patterns/fmdrone.scd
+++ b/patterns/fmdrone.scd
@@ -3,7 +3,7 @@
         Pbind(
             \instrument, \fm,
             \group, ~group[\instr],
-            \db, -29,
+            \db, -33,
             \carfreq, 50,
             \modfreq, Pexprand(49, 52),
             \moddepth, Pexprand(5, 140),
diff --git a/patterns/nasa_liftoff.scd b/patterns/nasa_liftoff.scd
index 8c29c1f..ae1420d 100644
--- a/patterns/nasa_liftoff.scd
+++ b/patterns/nasa_liftoff.scd
@@ -18,7 +18,7 @@
             \pan, Pwhite(-1.0, 1.0, inf),
             \panspeed, 0.03,
             \width, ~numSpeakers,
-            \db, Pseq([-26, -11, -11, -20, -22, -27] + 3),
+            \db, Pseq([-26, -11, -11, -20, -22, -27] - 1),
             \hipassfreq, Pseq([450, 220, 220, 220, 220, 220]),
             \hishelfdb, -9,
             \attack, Pseq([50, 10, 10, 10, 10, 10]),
diff --git a/pydon.log b/pydon.log
index 77090ba..5e36e98 100644
--- a/pydon.log
+++ b/pydon.log
@@ -78371,3 +78371,35640 @@ IOError: [Errno 5] Input/output error
 no data for 60 seconds, opening serial port again
 
 
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+('received data from unknown minibee', 65530, 178, [15, 150, 15, 222, 16, 223])
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Exception in thread xbee-thread:
+Traceback (most recent call last):
+  File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
+    self.run()
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 110, in run
+    self._callback(self.wait_read_frame())
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 460, in wait_read_frame
+    frame = self._wait_for_frame()
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 177, in _wait_for_frame
+    if self.serial.inWaiting() == 0:
+  File "/usr/lib/python2.7/site-packages/serial/serialutil.py", line 522, in inWaiting
+    return self.in_waiting
+  File "/usr/lib/python2.7/site-packages/serial/serialposix.py", line 467, in in_waiting
+    s = fcntl.ioctl(self.fd, TIOCINQ, TIOCM_zero_str)
+IOError: [Errno 5] Input/output error
+
+
+
+no data for 60 seconds, opening serial port again
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 14, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 14 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 13, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 13 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Exception in thread xbee-thread:
+Traceback (most recent call last):
+  File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
+    self.run()
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 110, in run
+    self._callback(self.wait_read_frame())
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 460, in wait_read_frame
+    frame = self._wait_for_frame()
+  File "/usr/lib/python2.7/site-packages/xbee/base.py", line 177, in _wait_for_frame
+    if self.serial.inWaiting() == 0:
+  File "/usr/lib/python2.7/site-packages/serial/serialutil.py", line 522, in inWaiting
+    return self.in_waiting
+  File "/usr/lib/python2.7/site-packages/serial/serialposix.py", line 467, in in_waiting
+    s = fcntl.ioctl(self.fd, TIOCINQ, TIOCM_zero_str)
+IOError: [Errno 5] Input/output error
+
+
+
+no data for 60 seconds, opening serial port again
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+serial port was not opened
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('could not open serial port', '/dev/ttyUSB0')
+
+
+Please make sure your coordinator node is connected to the computer and pass in the right serial port location upon startup, e.g. 'python swpydonhive.py -s /dev/ttyUSB1'
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
+gui_ip
+
+
+key is not None
+
+
+gui_port
+
+
+---------------------------------------------------------------------------
+
+
+MetaPydonHive - a universal client to communicate with the minibee network.
+
+
+version v0.44
+
+
+ --- to find out more about the startup options start with 'metapydonhive.py -h'
+
+
+ --- The client has been started with these options:
+
+
+{'verbose': False, 'apimode': True, 'ip': '0.0.0.0', 'xbeeerror': False, 'serial': '/dev/ttyUSB0', 'port': 57600, 'createNewFiles': True, 'logdata': False, 'minibees': 20, 'program': '/minibee/*', 'logdir': '.', 'autostart': False, 'gui_ip': '127.0.0.1', 'config': 'mb10-14.xml', 'hport': 57120, 'gui_port': None, 'baudrate': 57600, 'host': '127.0.0.1', 'mboffset': 1, 'name': 'pydonhive', 'loglevel': 'info', 'quiet': False, 'ignore': False, 'logname': 'pydon.log', 'clean': False}
+
+
+---------------------------------------------------------------------------
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+assigning minibee
+
+
+1
+
+
+('ignoring unknown minibees', False)
+
+
+('check for xbee errors', False)
+
+
+('gui interface', '127.0.0.1', None)
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('create new files for unknown minibees', True)
+
+
+Created OSC listener at (0.0.0.0,57600) and OSC sender to (127.0.0.1,57120) and opened serial port at /dev/ttyUSB0. Now waiting for messages.
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+no data for 60 seconds, opening serial port again
+
+
+serial port is closed, trying to open serial port again
+
+
+trying to open serial port
+
+
+('Opening serial port', '/dev/ttyUSB0', True)
+
+
+serial port is open again
+
+
+initialising communication through serial port
+
+
+querying settings
+
+
+setting coordinator settings
+
+
+querying settings
+
+
+--------------------------------
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+('XBEE setting changed', 'CE')
+
+
+('XBEE setting changed', 'AP')
+
+
+('XBEE setting changed', 'MY')
+
+
+('XBEE setting changed', 'DH')
+
+
+('XBEE setting changed', 'DL')
+
+
+('XBEE setting: channel', '\x12')
+
+
+('XBEE setting: panid', "\x10'")
+
+
+('XBEE setting: coordinator enable', '\x01')
+
+
+('XBEE setting: api mode', '\x02')
+
+
+('XBEE setting: my address', '\x00\x00')
+
+
+('XBEE setting: destination high address', '\x00\x00\x00\x00')
+
+
+('XBEE setting: destination low address', '\x00\x00\xff\xfa')
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 9, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 9 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 12, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 12 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 11, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 11 is configured
+
+
+--------------------------------
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+Sending config message for MiniBee 10, revision D, firmware 7
+
+
+Configuration:
+ 
+{'A5': 'TWIClock', 'A4': 'TWIData'}
+
+
+('confirmconfig', [1, 0, 50, 6, 0, 0, 0])
+
+
+minibee 10 is configured
+
+
+--------------------------------
+
+
+Waiting for Server-thread to finish
+
+
+Done; goodbye
+
+
+exiting hive loop
+
+
diff --git a/sdefs.scd b/sdefs.scd
index b8106e0..f6a3543 100644
--- a/sdefs.scd
+++ b/sdefs.scd
@@ -61,7 +61,7 @@
     }).add;
 
     SynthDef(\soundin, {
-        arg in=0, out=0, gate=0, da=2, lvlin=0.2, lvlout=0.2, pan=0, width=2.0,
+        arg in=0, out=0, gate=0, da=2, lvlin=1, lvlout=0.2, pan=0, width=2.0,
         locut=20, loshelffreq=200, loshelfdb=0, 
         hishelffreq=1500, hishelfdb=0, hicut=20000, 
         peakfreq=600, peakrq=1, peakdb=0, 
diff --git a/soundcheck.scd b/soundcheck.scd
index 684e69c..199f0c5 100644
--- a/soundcheck.scd
+++ b/soundcheck.scd
@@ -1,6 +1,7 @@
 (
     //speakertest
     fork{ var dur = 1;
+        4.wait;
         ~numSpeakers.do{|i, idx| 
             {Out.ar(idx, SinOsc.ar(880) * XLine.kr(0.1, 0.00001, dur, doneAction: 2))}.play;
             dur.wait
@@ -14,15 +15,25 @@
 
 (
     //audience enter mics
-    ~ch[\mic2].set(\lvlin, -0.dbamp, \lvlout, 0.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
-    ~ch[\mic3].set(\lvlin, -0.dbamp, \lvlout, 0.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
+    ~ch[\mic2].set(\lvlout, -3.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
+    ~ch[\mic3].set( \lvlout, -3.dbamp, \gate, 1, \fx1lvl, -20.dbamp, \fx2lvl, -20.dbamp, \fx3lvl, -5.dbamp, \width, ~numSpeakers);
 )
 (
+    var miclevel = -7.dbamp;
+
+    "darkness".postln;
+
+    ~ch[\mic0].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //külli
+    ~ch[\mic1].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //rakesh
+    ~ch[\mic2].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //kenneth
+    ~ch[\mic3].set(\lvlout, miclevel, \gate, 1, \fx1lvl, 0, \fx2lvl, 0, \fx3lvl, 0, \locut, 250, \hishelffreq, 8000, \hishelfdb, 3, \width, ~numSpeakers); //isabell
+)
+(
+    var level = -3.dbamp;
     //soundcheck mics
     //kulli, yellow
     ~ch[\mic0].set(
-        \lvlin, -6.dbamp, 
-        \lvlout, 3.dbamp, 
+        \lvlout, level, 
         \gate, 1, 
         \fx1lvl, 0, 
         \fx2lvl, 0, 
@@ -34,8 +45,7 @@
     );
     // rakesh, blue
     ~ch[\mic1].set(
-        \lvlin, -9.dbamp, 
-        \lvlout, 3.dbamp, 
+        \lvlout, level, 
         \gate, 1, 
         \fx1lvl, 0, 
         \fx2lvl, 0, 
@@ -47,8 +57,7 @@
     ); 
     // kenneth, none
     ~ch[\mic2].set(
-        \lvlin, -9.dbamp, 
-        \lvlout, 3.dbamp, 
+        \lvlout, level, 
         \gate, 1, 
         \fx1lvl, 0, 
         \fx2lvl, 0, 
@@ -60,8 +69,7 @@
     );
     // isabell, white
     ~ch[\mic3].set(
-        \lvlin, -9.dbamp, 
-        \lvlout, 3.dbamp, 
+        \lvlout, level, 
         \gate, 1, 
         \fx1lvl, 0, 
         \fx2lvl, 0, 
@@ -80,6 +88,8 @@
 )
 Pdef(\tens).play(TempoClock(2.0));
 Pdef(\tens).stop;
+~ch[\tens].set( \compgain, 12.dbamp, \ratio, 2, \limit, 0.1.dbamp, \locut, 50);
+
 (
 
     fork{
@@ -93,3 +103,7 @@ Pdef(\tens).stop;
     Pdef(\nasa_liftoff).stop;
     Pdef(\fmdrone).stop
 )
+Pdef(\emSolo).play;
+Pdef(\emSolo).stop;
+~ch[\grdelayLong].set(\fb, 0.6);
+~ch[\mic2].set(\gate, 1, \lvlout, -6.dbamp, \fx1lvl, -20.dbamp, \fx2lvl, -10.dbamp, \fx3lvl, 0.dbamp, \hishelffreq, 500, \hishelfdb, -3);
diff --git a/tracks.scd b/tracks.scd
index e20b408..b8b973d 100644
--- a/tracks.scd
+++ b/tracks.scd
@@ -48,10 +48,10 @@
     //microphones
     ~mic = [
         // lvlin, lvlout, outbus 
-        [-6.dbamp, -6.dbamp, \master],
-        [-6.dbamp, -6.dbamp, \master],
-        [-6.dbamp, -6.dbamp, \master],
-        [-6.dbamp, -6.dbamp, \master],
+        [-0.dbamp, -6.dbamp, \master],
+        [-0.dbamp, -6.dbamp, \master],
+        [-0.dbamp, -6.dbamp, \master],
+        [-0.dbamp, -6.dbamp, \master],
     ];
 
     ~mic.do{|item, idx|
@@ -64,7 +64,7 @@
                     \in, idx + ~micOffset,
                     \lvlin, item[0],
                     \lvlout, item[1],
-                    \out, item[2],
+                    \out, ~bus[item[2]],
                     \locut, 200,
                     \fx1, ~bus[\jpverb],
                     \fx1lvl, 0,
@@ -112,7 +112,7 @@
     ~ch[\grdelay].set( \lo_cut, 40, \density, 20, \grain_size, 0.001, \grain_size_rand, 0.3, \min_delay, 0.3, \max_delay, 1.5, \fb, 0.05, \mod_freq, 0.05, \mod_depth, 0.1);
     ~ch[\grdelayMedium].set( \lo_cut, 40, \density, 10, \grain_size, 1.0, \grain_size_rand, 0.3, \min_delay, 1.0, \max_delay, 4.0, \fb, 0.3, \mod_freq, 0.05, \mod_depth, 0.1);
     ~ch[\grdelayLong].set( \lo_cut, 40, \density, 10, \grain_size, 1.0, \grain_size_rand, 0.3, \min_delay, 1.0, \max_delay, 4.0, \fb, 0.5, \mod_freq, 0.05, \mod_depth, 0.1);
-    ~ch[\master].set( \compgain, 2.dbamp, \ratio, 2, \limit, -0.3.dbamp, \thresh, -3.dbamp, \locut, 40, \hishelfdb, -3, \hishelffreq, 800);
+    ~ch[\master].set( \compgain, 2.dbamp, \ratio, 2, \limit, -0.3.dbamp, \thresh, -3.dbamp, \locut, 80, \hishelfdb, -3, \hishelffreq, 800);
 )
 
 // (