1.10.14 Aqara Smartplugs, Rollershade und Tint LEuchten nicht mehr ansprechbar

[vaaarg]

describe the problem in Detail. What do you expect to happen ? What does happen ?

Just wanted to leave a note that directly after updating to newest stable version some vendors stopped to work. i directly changed down to last version, with which everything works as intended. The devices were even not deletable, I did not investigate further.

Adapter version

1.10.14

Coordinator firmware version

0000000

Coordinator

type:zStack30x version:2-2.2.7.2. revision:20211222 port:/dev/serial/by-id/usb-Texas_Instruments_CC2538_USB_CDC-if00 channel:11

Setup

pi5

Protocol of the error (as text, encapsulated in multiline code tags <>). Separate different occurrances into clearly split log sections

No response

[asgothian]

This is a known issue (#2351).

Current state is that there are 2 options to move forward:

• deleting the stored network setup (shepherd.db / nvbackup.json) and having to pair all devices anew
• moving to a newer TI based coordinator which can 'inherit' the existing network

There is an open issue on the zigbee-herdsman level to add an option which retains both network and hardware, but that is slow going.

A.

[vaaarg]

This is a known issue (#2351).

Current state is that there are 2 options to move forward:

• deleting the stored network setup (shepherd.db / nvbackup.json) and having to pair all devices anew
• moving to a newer TI based coordinator which can 'inherit' the existing network

There is an open issue on the zigbee-herdsman level to add an option which retains both network and hardware, but that is slow going.

A.

I bought `SLZB-07P7 Zigbee USB CC2652P7' should this do the Job ("inherit the Network") ?

[asgothian]

Yes, that one should work.