README.md

ubuntu-kilo-multinode

Document for ubuntu multinode setup

This documents are based on

http://docs.openstack.org/kilo/install-guide/install/apt/content/

http://docs.openstack.org/kilo/install-guide/install/apt/openstack-install-guide-apt-draft.pdf

Controller Node

Prepare script repository:

sudo su

apt-get install -y git 

git clone https://github.com/infortrend-openstack/ubuntu-kilo-multinode.git 

cd ubuntu-kilo-multinode/

Check your network topology is right(see topology),

Use ip addr or ifconfig to check your network interface name

Execute setup IP script, it will ask your IP, enter the Mgmt net, Ext net, VM net related to 3 nodes

bash set-controller-node-ip.sh

Recheck ip is correct (ifconfig, /etc/hosts, /etc/network/interfaces)

Update cloudarchive package, this script will reboot after installed:

bash update-cloudarchive-kilo.sh | tee log-update-cloudarchive-controller

Go on install Controller node (RabbitMQ, DB, Keystone, ...):

bash install-controller-node.sh | tee log-install-controller-node

Network Node

prepare script repository:

sudo su

apt-get install -y git 

git clone https://github.com/infortrend-openstack/ubuntu-kilo-multinode.git 

cd ubuntu-kilo-multinode/

Check your network topology is right(see topology),

Use ip addr or ifconfig to check your network interface name

Execute setup IP script, it will ask your IP, enter the Mgmt net, Ext net, VM net related to 3 nodes

bash set-network-node-ip.sh

Recheck ip is correct (ifconfig, /etc/hosts, /etc/network/interfaces)

Update cloudarchive package, this script will reboot after installed:

bash update-cloudarchive-kilo.sh | tee log-update-cloudarchive-network

Go on install Network node (Neutron ...):

bash install-network-node.sh | tee log-install-network-node

Compute Node

Prepare script repository:

sudo su

apt-get install -y git 

git clone https://github.com/infortrend-openstack/ubuntu-kilo-multinode.git 

cd ubuntu-kilo-multinode/

Check your network topology is right(see topology),

Use ip addr or ifconfig to check your network interface name

Execute setup IP script, it will ask your IP, enter the Mgmt net, Ext net, VM net related to 3 nodes

bash set-compute-node-ip.sh

Recheck ip is correct (ifconfig, /etc/hosts, /etc/network/interfaces)

Update cloudarchive package, this script will reboot after installed:

bash update-cloudarchive-kilo.sh | tee log-update-cloudarchive-compute

Go on install Compute node (Nova, Neutron ...):

bash install-compute-node.sh | tee log-install-compute-node

Next

After set up 3 node completely, reboot the 3 nodes

    reboot

Finally, create networking on controller node, or you can create by yourself :)

    bash create-initial-network.sh

You can launch VM instance now, have fun!