Transmission just doesn't start

[mooyg]

Hey, I am trying to get transmission up and running with PUREVPN as a provider

# Torrent client
  transmission-openvpn:
    image: haugene/transmission-openvpn
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
    volumes:
      - /mnt/media/services/transmission/config:/config
      - /mnt/media/services/transmission/data:/data
    logging:
      driver: json-file
      options:
        max-size: 10m
    environment:
      - OPENVPN_PROVIDER=PUREVPN
      - OPENVPN_USERNAME=
      - OPENVPN_PASSWORD=
      - LOCAL_NETWORK=192.168.29.0/24
    ports:
      - 9091:9091
      - 19999:19999

this is my config as of now but if I check logs I don't see that transmission is running. The port is exposed but can't connect to it as well since transmission just doesn't get up and running

[pkishino]

It would help if you posted the logs :)

[mooyg]

I dont see any logs related to transmission in the container, I cant ping the port from within the container as well. adding route to local network 192.168.29.0/24 via 172.25.0.1 dev eth0

this shows up tho

[pkishino]

Please post the whole docker logs

[mooyg]

Please post the whole docker logs

https://srcb.in/3fRyUmbVy3

[pkishino]

Is that the complete log? I only see where it starts to connect to the vpn. If that is all then no connection has been established yet and this transmission isn’t running

[mooyg]

yes, that's the complete log, exactly what I am confused about :)

[pkishino]

Try a different server perhaps?

[mooyg]

Um what do you mean by that, my device rn is raspberry pi5 transmission client alone works perfectly fine.

[pkishino]

I see you haven’t specified
-e OPENVPN_CONFIG=xxx
If you take a look in the wiki it should help, also look at our vpn config repo to find list of servers. Right now it just tries the default, not sure which country that is in.. might not be best choice

[mooyg]

Is that the complete log? I only see where it starts to connect to the vpn. If that is all then no connection has been established yet and this transmission isn’t running

Try a different server perhaps?

I see you haven’t specified -e OPENVPN_CONFIG=xxx If you take a look in the wiki it should help, also look at our vpn config repo to find list of servers. Right now it just tries the default, not sure which country that is in.. might not be best choice

Yes am aware about that, I tried with it as well; Same result so i just didn't use it this time for a quick setup

[pkishino]

I’d suggest 1) check with downloading a new profile from purevpn and test it using CUSTOM Provider 2) check with debug turned on