How to Build

Build host

Current build host for libtuv

• Ubuntu 14.04

Build tools installation

Host build

sudo apt-get install build-essential cmake

Cross compiler for Raspberry Pi 2

sudo apt-get install gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf

Cross compiler for STM32F4-Discovery

• Please read https://launchpad.net/gcc-arm-embedded/4.8/4.8-2014-q3-update

Build and run test

for x86 linux (Ubuntu 14.04)

make
./build/i686-linux/debug/bin/tuvtester
(or)
./build/x86_64-linux/debug/bin/tuvtester

for arm-linux (Raspberry Pi 2)

TUV_PLATFORM=arm-linux TUV_BOARD=rpi2 make
scp ./build/arm-linux/debug/bin/tuvtester pi@(your rpi2 IP addr):/home/pi/.

and in your RPi2 shell

./tuvtester

for arm-nuttx (STM32F4-Discovery)

TUV_PLATFORM=arm-nuttx TUV_BOARD=stm32f4disco TUV_SYSTEMROOT=/.../nuttx/nuttx make

Where /.../nuttx/nuttx is absolute path to nuttx where .config resides. It'll copy libtuv.a and libtuvtester.a, tester in library, to /.../nuttx/nuttx/lib folder.