odm.py

import sys, datetime, time, platform

try:
    import serial
    from serial.tools.list_ports import comports
except ImportError as err:
    sys.exit("❌ Can't find pyserial module - install it by running 'pip install pyserial'")
    
if len(sys.argv) == 2:
    comments = sys.argv[1].replace(' ', '_')
else:
    comments = input("Sample?  ").replace(' ', '_')
basefilename = datetime.datetime.now().strftime("%Y%m%dT%H%M%S") + "_" + comments
csvfilename = basefilename + "_DATA.csv"
statfilename = basefilename + "_STAT.txt"
csvfile = open(csvfilename, "w")
statfile = open(statfilename, "w")

ports = 0
port = ""
for p in comports():
    print(str(p))
    if "USB" in str(p) or "usb" in str(p):
        port = p.name
        ports += 1
if ports == 0:
    sys.exit("❌ No port found - is the Arduino plugged in?")
if ports >= 2:
    sys.exit("❌ Too many ports found - unplug everything but the Arduino and try again")
if platform.system() == "Darwin":  # if MacOS...
    port = "/dev/" + port   # ...prepend /dev/
print("✅ Found an Arduino at " + port)

data = []
ser = serial.Serial(port, 115200, timeout=1)

start_time = time.time()
statfile.write(str(start_time) + "\n")
t1 = 300  # 5 minutes  300
t2 = 30*60 + t1  # 30 minutes of dissolution

# measurement_number = 0
ser.flush()
ser.read_all()
while True:
    try:
        et = time.time() - start_time
        if 0 <= et < t1-5:  # baseline phase
            print(f"{str(datetime.timedelta(seconds=t1-et))}", end="\t")
        elif t1-5 <= et < t1:  # alarm phase
            print(f"{str(datetime.timedelta(seconds=t1-et))}\a", end="\t")
        elif t1 <= et < t2:  # dissolution phase
            print(f"{str(datetime.timedelta(seconds=t2-et))}", end="\t")
        elif et >= t2:  # experiment over
            break
        s = ser.readline().decode("utf-8", "ignore")
        print(f"{ser.inWaiting()}\t{s}", end="")
        csvfile.write(s)
    except:
        break

statfile.write(str(time.time()) + "\n")
csvfile.close()
statfile.close()
print("\n\aDONE")