Collected artefacts for building and controlling the AutoPulse EMFI-Station
- 1x Raspberry Pi 5
- 1x Ender 3 S1
- 1x ChipShouter | FaultyCat | PicoEMP
- 1x Raspberry Pi Camera Module 3 Wide (Datasheet)
- 1x Raspberry Pi Camera Module 3 Wide NoIR (Datasheet)
- 2x 500mm Raspberry Pi 5 Camera Cable (the old ones are not compatible with the new connector on the Pi 5)
- 8x White LEDs and 200 Ω resistor
- 3x IR LEDs and 1k Ω resistor OR
- 3x White LEDs and 735 Ω resistor (approx)
- Heat-Set Inserts M3x5x4mm (Voron variant)
- various Screws (M3)
- Jumper cables
- (Optional) crimp set for Dupont connectors