Motion Detection - Person only on RLC-810A

[widewings007]

Hi, is there a way I can set the motion to detection to person motion only as I am trying to control a light with this. At the moment there is a lot of motion detection and my light is turning on and off even though not needed.

Thanks for the help.

(Looks like this is solved already with the latest update - Thanks for making the modification)

[rysm83]

I too am looking to use the AI person detection on my camera. I have RLC-520A that I have added via this integration. Motion is working however the person motion detection is not. It is always clear and not detection anything. I would like to use this AI motion for automations like this one. What I have done in the mean time is integrated DOODS object detection into HA. So far it is working ok about 80-90% of the time. What I have done is use a motion sensor to detect the motion then using DOODS do image processing of the camera to scan for a person. If true then the light in the room turns on. Once motion is not detected it once again scans the image for a person to keep the light on since someone is still in the room. only when the image processing does not detect the person then the light turns off. I think that using the AI with the reolink camera would make this simpler and not need to DOODS integration if anyone can help to get that working?

[cmpoyner]

If you manually set to vehicle/motion detection under push notifications and then use the integration to toggle notifications on/off your vehicle/person settings are changed to Any Motion.

Disregard, this appears to function properly after updating camera firmware to 3.0.0.494

[Teevolution]

I have the same problem. HA detect motion from all my camera but no the AI person, pet, car? I did have it working via person detection but it now does not. Has there been an update from Reolink that has stopped this working?

[de-salvatierra]

If you manually set to vehicle/motion detection under push notifications and then use the integration to toggle notifications on/off your vehicle/person settings are changed to Any Motion.

Disregard, this appears to function properly after updating camera firmware to 3.0.0.494

My camera has firmware version 3.0.0.177_21012103. Where did you get version 3.0.0.494?

[cpainchaud]

https://reolink.com/download-center/

[de-salvatierra]

If you manually set to vehicle/motion detection under push notifications and then use the integration to toggle notifications on/off your vehicle/person settings are changed to Any Motion.

Disregard, this appears to function properly after updating camera firmware to 3.0.0.494
My camera has firmware version 3.0.0.177_21012103. Where did you get version 3.0.0.494?

[cpainchaud]

https://reolink.com/download-center/