build.yml

name: Build

# Controls when the workflow will run
on:
  # Triggers the workflow on push or pull request events but only for the master branch
  push:
  pull_request:

  # Allows you to run this workflow manually from the Actions tab
  workflow_dispatch:


jobs:
  build-mac-intel:
    runs-on: macos-12
    strategy:
      matrix:
        python-version: [ '3.9', '3.10', '3.11', '3.12', '3.13', 'pypy-3.9', 'pypy-3.10' ]
        raylib-platform: ['Desktop', 'SDL']
    env:
      MACOSX_DEPLOYMENT_TARGET: '10.13'
    steps:
      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Build SDL
        run: |
          wget https://github.com/libsdl-org/SDL/archive/refs/tags/release-2.30.7.tar.gz
          tar xvfz release-2.30.7.tar.gz
          mkdir build
          cd build
          cmake ../SDL-release-2.30.7 -DSDL_SHARED=OFF -DSDL_STATIC=ON -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_BUILD_TYPE=Release
          cmake --build . --config Release
          sudo cmake --install .

      - name: Setup Python
        uses: actions/setup-python@v5
        with:
          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
          python-version: ${{ matrix.python-version }}
          # The target architecture (x86, x64) of the Python interpreter.
          architecture: x64

      # Runs a set of commands using the runners shell
      - name: Build raylib without SDL because SDL version has incorrect pkg-config
        run: |
          cd raylib-c
          mkdir build
          cd build
          cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
          make -j2
          sudo make install

      - name: Build raylib with SDL if selected
        run: |
          cd raylib-c
          mkdir build2
          cd build2
          cmake -DPLATFORM=${{ matrix.raylib-platform }}  -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
          make -j2
          sudo cp raylib/libraylib.a /usr/local/lib/libraylib.a

      - name: Copy extras
        run: |
          sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
          sudo cp physac/src/physac.h /usr/local/include/
          sudo cp raygui/src/raygui.h /usr/local/include/

      - name: Build raylib-python-cffi
        env:
          RAYLIB_PLATFORM: ${{ matrix.raylib-platform }}
        run: |
          python -m pip install --upgrade pip
          pip3 install "cffi>=1.17.1"
          pip3 install wheel
          pip3 install setuptools
          python setup.py bdist_wheel --plat-name macosx_10_13_x86_64

      - name: Test
        run: |
          pip3 install dist/*.whl
          cd /
          python3 -c 'import pyray; pyray.init_window(100,100,"test")' >/tmp/output 2>&1 || true
          cat /tmp/output
          if grep -q "INFO: Initializing raylib" /tmp/output; then
            echo "Passed"
            exit 0
          else
            echo "Failed"
            exit 1
          fi

      - name: Upload build Artifact wheel
        uses: actions/upload-artifact@v3.2.1
        with:
          name: wheel
          path: dist/*

#  build-mac-universal:
#    runs-on: macos-14
#    strategy:
#      matrix:
#        python-version: [ '3.8', '3.9', '3.10', '3.11', '3.12', '3.13', 'pypy-3.8', 'pypy-3.9', 'pypy-3.10' ]
#        raylib-platform: ['Desktop', 'SDL']
#    env:
#      MACOSX_DEPLOYMENT_TARGET: 11.0
#    steps:
#      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
#      - uses: actions/checkout@v4
#        with:
#          submodules: recursive
#
#      - name: Build SDL
#        run: |
#          wget https://github.com/libsdl-org/SDL/archive/refs/tags/release-2.30.7.tar.gz
#          tar xvfz release-2.30.7.tar.gz
#          mkdir build
#          cd build
#          cmake ../SDL-release-2.30.7 -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" -DSDL_SHARED=OFF -DSDL_STATIC=ON -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_BUILD_TYPE=Release
#          cmake --build . --config Release
#          sudo cmake --install .
#
#      - name: Setup Python
#        uses: actions/setup-python@v5
#        with:
#          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
#          python-version: ${{ matrix.python-version }}
#          architecture: arm64
#
#      # Runs a set of commands using the runners shell
#      - name: Build raylib without SDL because SDL version has incorrect pkg-config
#        run: |
#          cd raylib-c
#          mkdir build
#          cd build
#          cmake -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
#          make -j2
#          sudo make install
#
#      - name: Build raylib with SDL if selected
#        run: |
#          cd raylib-c
#          mkdir build2
#          cd build2
#          cmake -DPLATFORM=${{ matrix.raylib-platform }} -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" -DPLATFORM=SDL -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
#          make -j2
#          sudo cp raylib/libraylib.a /usr/local/lib/libraylib.a
#
#      - name: Copy extras
#        run: |
#          sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
#          sudo cp physac/src/physac.h /usr/local/include/
#          sudo cp raygui/src/raygui.h /usr/local/include/
#
#      - name: Build raylib-python-cffi
#        run: |
#          python -m pip install --upgrade pip
#          pip3 install "cffi>=1.17.1"
#          pip3 install wheel
#          pip3 install setuptools
#          RAYLIB_PLATFORM=${{ matrix.raylib-platform }} python setup.py bdist_wheel
#
#      - name: Upload build Artifact wheel
#        uses: actions/upload-artifact@v3.2.1
#        with:
#          name: wheel
#          path: dist/*

#
#      # Name defaults to universal2 and it technically is, but we override name to arm64.  Why don't we make a working universal2 wheel?  Because
#      # I'd rather have a separate x86_64 that I can test, and I want it to work on 10_15 but I'm not sure a 'macosx_10_15_universal2' is valid
#      # given that there is no SDK for universal until macosx_11_0
#      - name: Build raylib-python-cffi
#        run: |
#          python -m pip install --upgrade pip
#          pip3 install cffi
#          pip3 install wheel
#          python setup.py bdist_wheel --plat-name macosx_12_0_arm64



  build-linux:
    runs-on: ubuntu-20.04
    strategy:
      # You can use PyPy versions in python-version.
      # For example, pypy2 and pypy3
      matrix:
        python-version: [ '3.9', '3.10', '3.11', '3.12', '3.13', 'pypy-3.9', 'pypy-3.10' ]
        raylib-platform: ['Desktop', 'SDL', 'DRM']
    steps:
      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Setup Python
        uses: actions/setup-python@v5
        with:
          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
          python-version: ${{ matrix.python-version }}
          # The target architecture (x86, x64) of the Python interpreter.
          architecture: x64

      - name: install prereqs
        run: |
          sudo apt update
          sudo apt install libasound2-dev mesa-common-dev libx11-dev libxrandr-dev libxi-dev xorg-dev libgl1-mesa-dev libglu1-mesa-dev libwayland-dev libxkbcommon-dev
      - name: Build SDL
        run: |          
          wget https://github.com/libsdl-org/SDL/archive/refs/tags/release-2.30.7.tar.gz
          tar xvfz release-2.30.7.tar.gz
          mkdir build
          cd build
          cmake ../SDL-release-2.30.7 -DSDL_SHARED=OFF -DSDL_STATIC=ON -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_BUILD_TYPE=Release
          cmake --build . --config Release
          sudo cmake --install .

      # Runs a set of commands using the runners shell
      - name: Build raylib
        run: |
          cd raylib-c
          mkdir build
          cd build
          cmake -DPLATFORM=${{ matrix.raylib-platform }} -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release -DOpenGL_GL_PREFERENCE=GLVND ..
          make -j2
          sudo make install
      - name: Copy extras
        run: |
          sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
          sudo cp physac/src/physac.h /usr/local/include/
          sudo cp raygui/src/raygui.h /usr/local/include/
      - name: Build raylib-python-cffi
        env:
          RAYLIB_PLATFORM: ${{ matrix.raylib-platform }}
        run: |
          python -m pip install --upgrade pip
          pip3 install "cffi>=1.17.1"
          pip3 install wheel
          pip3 install setuptools
          python setup.py bdist_wheel --plat-name manylinux2014_x86_64
      - name: Test
        run: |
          pip3 install dist/*.whl
          cd /
          python3 -c 'import pyray; pyray.init_window(100,100,"test")' >/tmp/output 2>&1 || true
          cat /tmp/output
          if grep -q "INFO: Initializing raylib" /tmp/output; then
            echo "Passed"
            exit 0
          else
            echo "Failed"
            exit 1
          fi
                    

      - name: Upload build Artifact wheel
        uses: actions/upload-artifact@v3.2.1
        with:
          name: wheel
          path: dist/*




  build-windows:
    # The type of runner that the job will run on
    runs-on: windows-2019
    strategy:
      # You can use PyPy versions in python-version.
      # For example, pypy2 and pypy3
      matrix:
        python-version:  [ '3.9', '3.10', '3.11', '3.12', '3.13', 'pypy-3.9', 'pypy-3.10' ]
        raylib-platform: ['Desktop', 'SDL']
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Download SDL2
        run: curl -L -o SDL2.zip https://github.com/libsdl-org/SDL/releases/download/release-2.30.8/SDL2-devel-2.30.8-VC.zip

      - name: Create extraction directory
        run: mkdir ${{ runner.temp }}\SDL2

      - name: Unzip SDL2
        run: tar -xf SDL2.zip -C ${{ runner.temp }}\SDL2 --strip-components=1

      - name: Set SDL2_DIR environment variable
        run: echo SDL2_DIR=${{ runner.temp }}\SDL2\cmake >> $env:GITHUB_ENV

      - name: Setup Python
        uses: actions/setup-python@v5
        with:
          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
          python-version: ${{ matrix.python-version }}
          # The target architecture (x86, x64) of the Python interpreter.
          architecture: x64

      - name: Add msbuild to PATH
        uses: microsoft/setup-msbuild@v1.0.2

      - name: Build raylib
        run: |
          cd raylib-c
          mkdir build
          cd build
          cmake -DPLATFORM=${{ matrix.raylib-platform }}  -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
          msbuild raylib.sln /target:raylib /property:Configuration=Release
          copy raylib\Release\raylib.lib ..\..
          cd ..\..
        shell: cmd

      - name: Build raylib-python-cffi
        env:
          RAYLIB_PLATFORM: ${{ matrix.raylib-platform }}
        run: |
          copy ${{ runner.temp }}\SDL2\lib\x64\SDL2.lib .
          copy ${{ runner.temp }}\SDL2\lib\x64\SDL2.dll raylib\
          python -m pip install --upgrade pip
          pip3 install "cffi>=1.17.1"
          pip3 install wheel
          pip3 install setuptools
          del raylib\dynamic\*.so* >nul 2>&1
          del raylib\dynamic\*.dll >nul 2>&1
          del raylib\dynamic\*.dylib >nul 2>&1
          del raylib\dynamic\32bit\* >nul 2>&1
          python setup.py bdist_wheel
        shell: cmd

      - name: Test
        shell: bash
        run: |
          pip3 install --no-deps dist/*.whl
          cd /
          python3 -c 'import pyray; pyray.init_window(100,100,"test")' >/tmp/output 2>&1 || true
          cat /tmp/output
          if grep -q "INFO: Initializing raylib" /tmp/output; then
            echo "Passed"
            exit 0
          else
            echo "Failed"
            exit 1
          fi
          
      - name: Upload build Artifact wheel
        uses: actions/upload-artifact@v3.2.1
        with:
          name: wheel
          path: dist/* 
          
  source-distro:
    runs-on: ubuntu-20.04

    steps:
      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Setup Python
        uses: actions/setup-python@v5
        with:
          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
          python-version: '3.12'
          # The target architecture (x86, x64) of the Python interpreter.
          architecture: x64

      - name: Build raylib
        run: |
          sudo apt update
          sudo apt install libasound2-dev mesa-common-dev libx11-dev libxrandr-dev libxi-dev xorg-dev libgl1-mesa-dev libglu1-mesa-dev libwayland-dev libxkbcommon-dev
          cd raylib-c
          mkdir build
          cd build
          cmake -DBUILD_EXAMPLES=OFF -DCUSTOMIZE_BUILD=ON -DSUPPORT_FILEFORMAT_JPG=ON -DSUPPORT_FILEFORMAT_FLAC=ON -DWITH_PIC=ON -DCMAKE_BUILD_TYPE=Release ..
          make -j2
          sudo make install
      - name: Copy extras
        run: |
          sudo cp -r raylib-c/src/external/glfw/include/GLFW /usr/local/include/
          sudo cp physac/src/physac.h /usr/local/include/
          sudo cp raygui/src/raygui.h /usr/local/include/

      - name: Build raylib-python-cffi
        run: |
          python -m pip install --upgrade pip
          pip3 install "cffi>=1.17.1"
          pip3 install wheel
          pip3 install setuptools
          python setup.py sdist

      - name: Upload build Artifact wheel
        uses: actions/upload-artifact@v3.2.1
        with:
          name: wheel
          path: dist/*

  dynamic-distro:
    runs-on: ubuntu-20.04

    steps:
      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Setup Python
        uses: actions/setup-python@v5
        with:
          # Version range or exact version of a Python version to use, using SemVer's version range syntax.
          python-version: '3.12'
          # The target architecture (x86, x64) of the Python interpreter.
          architecture: x64

      - name: Build raylib-python-cffi-dynamic
        run: |
          python -m pip install --upgrade pip
          pip3 install "cffi>=1.17.1"
          pip3 install wheel
          pip3 install setuptools
          cd dynamic
          python setup.py sdist

      - name: Upload build Artifact wheel
        uses: actions/upload-artifact@v3.2.1
        with:
          name: wheel
          path: dynamic/dist/*