From 93b1da844575595cc5354e36bdf150ad5810e878 Mon Sep 17 00:00:00 2001
From: Sylvester Joosten <sjoosten@anl.gov>
Date: Fri, 15 Nov 2024 15:59:06 -0500
Subject: [PATCH 1/3] Special debug configuration of the BIC with only the
first tracking layer enabled
---
compact/ecal/bic/bic_layer1_only.xml | 190 ++++++++++++++++++
compact/ecal/bic_6layers.xml | 2 +-
compact/ecal/bic_layer1_only.xml | 17 ++
configurations/craterlake_bic_layer1_only.yml | 38 ++++
4 files changed, 246 insertions(+), 1 deletion(-)
create mode 100644 compact/ecal/bic/bic_layer1_only.xml
create mode 100644 compact/ecal/bic_layer1_only.xml
create mode 100644 configurations/craterlake_bic_layer1_only.yml
diff --git a/compact/ecal/bic/bic_layer1_only.xml b/compact/ecal/bic/bic_layer1_only.xml
new file mode 100644
index 000000000..6e5c965da
--- /dev/null
+++ b/compact/ecal/bic/bic_layer1_only.xml
@@ -0,0 +1,190 @@
+<!-- SPDX-License-Identifier: LGPL-3.0-or-later -->
+<!-- Copyright (C) 2022 Whitney Armstrong, Chao Peng, Maria Zurek, Jihee Kim -->
+<!-- Active AstroPix layers: 1-3-4-6 -->
+
+
+<lccdd>
+
+ <display>
+ </display>
+ <define>
+ <comment>
+ ---------------------------------------
+ EM Calorimeter Parameters with AstroPix
+ THIS IS A SPECIAL VERSION WITH ONLY THE FIRST IMAGING LAYER ENABLED
+ FOR TRACKING DEBUG PURPOSES ONLY
+ ---------------------------------------
+ </comment>
+ <comment>
+ To change the number of imaging layer slots from, e.g., 9 to 6,
+ change EcalBarrelImagingLayers_nMax variable. Note that this does NOT change the
+ number of silicon frames, as each silicon frame and layer is placed manually.
+
+ This file assumes the EcalBarrel_enable_staves_N variables have been defined to allow
+ changing the configuration by enabling/disabling staves
+ </comment>
+ <!-- Number of imaging layer slots -->
+ <constant name="EcalBarrelImagingLayers_num" value="1"/>
+ <comment>
+ Active part of the calorimeter is
+ 435 cm long
+ -41.25 cm offset
+ </comment>
+ <constant name="EcalBarrel_Calorimeter_zmin"
+ value="min(258.75*cm, EcalBarrelBackward_zmax)"/>
+ <constant name="EcalBarrel_Calorimeter_zmax"
+ value="min(176.25*cm, EcalBarrelForward_zmax)"/>
+ <constant name="EcalBarrel_Readout_zmin" value="273.75*cm"/>
+ <constant name="EcalBarrel_Readout_zmax" value="191.25*cm"/>
+ <constant name="EcalBarrel_Calorimeter_length"
+ value="EcalBarrel_Calorimeter_zmax + EcalBarrel_Calorimeter_zmin"/>
+ <constant name="EcalBarrel_Calorimeter_offset"
+ value="(EcalBarrel_Calorimeter_zmax - EcalBarrel_Calorimeter_zmin)/2.0"/>
+
+ <constant name="EcalBarrel_FrontSupportThickness" value="0.5*cm"/>
+ <constant name="EcalBarrel_BackSupportThickness" value="3*cm"/>
+ <constant name="EcalBarrel_SiliconThickness" value="500*um"/>
+ <constant name="EcalBarrel_ElectronicsThickness" value="150*um"/>
+ <constant name="EcalBarrel_CopperThickness" value="100*um"/>
+ <constant name="EcalBarrel_KaptonThickness" value="200*um"/>
+ <constant name="EcalBarrel_EpoxyThickness" value="100*um"/>
+ <constant name="EcalBarrel_CarbonFrameThickness" value="2*mm"/>
+ <constant name="EcalBarrel_CarbonStaveThickness" value="0.5*mm"/>
+
+ <constant name="EcalBarrel_AstroPix_width" value="2*cm"/>
+ <constant name="EcalBarrel_AstroPix_length" value="2*cm"/>
+ <constant name="EcalBarrel_AstroPix_margin" value="200*um"/>
+ <constant name="EcalBarrel_AstroPix_thickness"
+ value="EcalBarrel_SiliconThickness
+ + EcalBarrel_ElectronicsThickness
+ + EcalBarrel_CopperThickness
+ + EcalBarrel_KaptonThickness
+ + EcalBarrel_EpoxyThickness"/>
+
+ <constant name="EcalBarrel_Stave_width" value="EcalBarrel_AstroPix_width + 2. * EcalBarrel_AstroPix_margin"/>
+ <constant name="EcalBarrel_Stave_length" value="EcalBarrel_Calorimeter_length"/>
+ <constant name="EcalBarrel_Stave_thickness" value="EcalBarrel_AstroPix_thickness + EcalBarrel_CarbonStaveThickness"/>
+ <constant name="EcalBarrel_StaveTilt_angle" value="10*degree"/>
+ <constant name="EcalBarrel_Stave_ModuleRepeat" value="floor(EcalBarrel_Calorimeter_length / (EcalBarrel_AstroPix_length + EcalBarrel_AstroPix_margin))"/>
+
+ <constant name="EcalBarrel_FiberRadius" value="0.5*mm"/>
+ <constant name="EcalBarrel_FiberXSpacing" value="1.34*mm"/>
+ <constant name="EcalBarrel_FiberZSpacing" value="1.22*mm"/>
+ <constant name="EcalBarrel_CladdingThickness" value="0.04*mm"/>
+ <constant name="EcalBarrel_SpaceBetween" value="0.01*mm"/>
+ <comment>
+ For Pb/SiFi (GlueX): X0 ~ 1.45 cm
+ For W/SiFi (sPHENIX): X0 ~ 0.7 cm (but different fiber orientation)
+ </comment>
+ <constant name="EcalBarrel_RadiatorThickness" value="EcalBarrel_FiberZSpacing * 17"/>
+ <constant name="EcalBarrel_TotalFiberLayers_num" value="12"/>
+ <constant name="EcalBarrel_RadiatorEdgeThickness" value="0.61*mm"/>
+ <constant name="EcalBarrel_SectorRepeat" value="EcalBarrelSectorsN"/>
+ <constant name="EcalBarrel_AvailThickness" value="EcalBarrelRegion_thickness - EcalBarrel_BackSupportThickness - EcalBarrel_FrontSupportThickness"/>
+
+ <constant name="EcalBarrel_ImagingLayerThickness" value="1.7*cm"/>
+
+ <constant name="EcalBarrel_ImagingLayerThickness_WithoutFrame"
+ value="EcalBarrel_ImagingLayerThickness
+ - 2*EcalBarrel_CarbonFrameThickness"/>
+
+ <constant name="EcalBarrel_ScFiLayerThickness_Imaging"
+ value="EcalBarrel_RadiatorThickness + 2*EcalBarrel_RadiatorEdgeThickness"/>
+
+ <comment>
+ Adjusting size of the ScFi back chunk to match number of imaging layers
+ and ~17.1 radiation lengths in total
+ </comment>
+ <constant name="EcalBarrel_FiberBulkLayers_num" value = "EcalBarrel_TotalFiberLayers_num-EcalBarrelImagingLayers_num+1"/>
+
+ <constant name="EcalBarrel_ImagingPartThickness"
+ value="EcalBarrelImagingLayers_num * (EcalBarrel_ImagingLayerThickness + EcalBarrel_ScFiLayerThickness_Imaging + EcalBarrel_SpaceBetween)
+ - EcalBarrel_ScFiLayerThickness_Imaging"/>
+ <constant name="EcalBarrel_ScFiPartThickness"
+ value="EcalBarrel_RadiatorThickness*EcalBarrel_FiberBulkLayers_num"/>
+ <constant name="EcalBarrelDetector_rmax"
+ value="EcalBarrel_rmin + EcalBarrel_FrontSupportThickness
+ + EcalBarrel_ImagingPartThickness + EcalBarrel_ScFiPartThickness + EcalBarrel_BackSupportThickness"/>
+
+ </define>
+
+ <limits>
+ </limits>
+
+ <regions>
+ </regions>
+
+ <display>
+ </display>
+
+ <detectors>
+
+ <comment>
+ ---------------------------------------
+ Imaging Layers of Barrel EM Calorimeter
+ ---------------------------------------
+ Silicon (Astropix) readout layers for imaging 3d showers
+ </comment>
+ <detector
+ id="EcalBarrel_ID"
+ name="EcalBarrelImaging"
+ type="epic_EcalBarrelImaging"
+ readout="EcalBarrelImagingHits"
+ calorimeterType="EM_BARREL"
+ vis="EcalBarrelEnvelopeVis"
+ offset="EcalBarrel_Calorimeter_offset">
+ <dimensions numsides="EcalBarrel_SectorRepeat"
+ rmin="EcalBarrel_rmin"
+ z="EcalBarrel_Calorimeter_length"/>
+ <sectors vis="EcalBarrelSectorVis"/>
+
+ <module name="AstroPix_Module"
+ vis="EcalBarrelModuleVis">
+ <module_component name="AstroPix_Chip"
+ material="Silicon"
+ width="EcalBarrel_AstroPix_width"
+ length="EcalBarrel_AstroPix_length"
+ thickness="EcalBarrel_AstroPix_thickness"
+ vis="EcalBarrelModuleVis">
+ <slice material="Silicon" thickness="EcalBarrel_SiliconThickness" vis="EcalBarrelSliceVis" sensitive="yes" limits="cal_limits"/>
+ <slice material="Silicon" thickness="EcalBarrel_ElectronicsThickness" vis="EcalBarrelSliceVis"/>
+ <slice material="Copper" thickness="EcalBarrel_CopperThickness" vis="EcalBarrelSliceVis"/>
+ <slice material="Kapton" thickness="EcalBarrel_KaptonThickness" vis="EcalBarrelSliceVis"/>
+ <slice material="Epoxy" thickness="EcalBarrel_EpoxyThickness" vis="EcalBarrelSliceVis"/>
+ </module_component>
+ </module>
+
+ <support thickness="EcalBarrel_FrontSupportThickness" material="Aluminum" vis="EcalBarrelSupportVis"/>
+
+ <layer repeat="1" vis="EcalBarrelLayerVis"
+ thickness="EcalBarrel_ImagingLayerThickness"
+ space_before="EcalBarrel_FrontSupportThickness">
+ <frame material="CarbonFiber" fill="Air" thickness="EcalBarrel_CarbonFrameThickness" height="EcalBarrel_ImagingLayerThickness" vis="EcalBarrelSliceVis"/>
+ <stave repeat="6"
+ width="EcalBarrel_Stave_width"
+ length="EcalBarrel_Stave_length"
+ thickness="EcalBarrel_Stave_thickness"
+ angle="EcalBarrel_StaveTilt_angle"
+ module="AstroPix_Module"
+ vis="EcalBarrelStaveVis"
+ enable="EcalBarrel_enable_staves_1">
+ <xy_layout
+ dx="EcalBarrel_AstroPix_width + EcalBarrel_AstroPix_margin"
+ dy="EcalBarrel_AstroPix_length + EcalBarrel_AstroPix_margin"
+ />
+ </stave>
+ </layer>
+ </detector>
+
+ <readouts>
+ <readout name="EcalBarrelImagingHits">
+ <segmentation type="CartesianGridXY" grid_size_x="0.5 * mm" grid_size_y="0.5 * mm"/>
+ <id>system:8,sector:6,layer:4,stave:4,module:8,slice:2,x:32:-16,y:-16</id>
+ </readout>
+ <readout name="EcalBarrelScFiHits">
+ <segmentation type="CartesianStripZ" strip_size_x="1.0*cm" identifier_x="z"/>
+ <id>system:8,sector:6,layer:6,slice:4,grid:10,fiber:16,z:-14</id>
+ </readout>
+ </readouts>
+
+</lccdd>
diff --git a/compact/ecal/bic_6layers.xml b/compact/ecal/bic_6layers.xml
index 059c92b9b..f3eab6f89 100644
--- a/compact/ecal/bic_6layers.xml
+++ b/compact/ecal/bic_6layers.xml
@@ -3,7 +3,7 @@
<lccdd>
<info name="bic_default"
- title="Default ePIC BIC configuration with 4 AstroPix layers"
+ title="Alternate ePIC BIC configuration with 6 AstroPix layers"
author="@sly2j"
url="https://github.com/sly2j"
status="development"
diff --git a/compact/ecal/bic_layer1_only.xml b/compact/ecal/bic_layer1_only.xml
new file mode 100644
index 000000000..8f46b3658
--- /dev/null
+++ b/compact/ecal/bic_layer1_only.xml
@@ -0,0 +1,17 @@
+<!-- SPDX-License-Identifier: LGPL-3.0-or-later -->
+<!-- Copyright (C) 2024 Sylvester Joosten -->
+<lccdd>
+
+ <info name="bic_default"
+ title="Special ePIC BIC configuration with only the first AstroPix layer (and support) enabled"
+ author="@sly2j"
+ url="https://github.com/sly2j"
+ status="development"
+ version="1.0"
+ ><comment/></info>
+
+ <define>
+ <constant name="EcalBarrel_enable_staves_1" value="1"/>
+ </define>
+ <include ref="bic/bic_layer1_only.xml"/>
+</lccdd>
diff --git a/configurations/craterlake_bic_layer1_only.yml b/configurations/craterlake_bic_layer1_only.yml
new file mode 100644
index 000000000..db5420f34
--- /dev/null
+++ b/configurations/craterlake_bic_layer1_only.yml
@@ -0,0 +1,38 @@
+ebeam: 10
+pbeam: 100
+features:
+ beampipe:
+ tracking:
+ definitions_craterlake:
+ vertex_barrel:
+ silicon_barrel:
+ mpgd_barrel:
+ support_service_craterlake:
+ mpgd_outerbarrel:
+ mpgd_forward_endcap:
+ mpgd_backward_endcap:
+ silicon_disks:
+ tof_barrel:
+ tof_endcap:
+ pid:
+ dirc:
+ pfrich:
+ drich:
+ ecal:
+ forward_homogeneous:
+ forward_insert_homogeneous:
+ bic_layer1_only:
+ backward_PbWO4:
+ solenoid:
+ hcal:
+ lfhcal_with_space_for_insert:
+ forward_insert:
+ barrel_gdml:
+ barrel_flux_return:
+ forward_endcap_flux:
+ backward:
+ backward_endcap_flux:
+ far_forward:
+ default:
+ far_backward:
+ default:
From c5e017284843aa95a734be1b1a92a75bb8754f9f Mon Sep 17 00:00:00 2001
From: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Date: Fri, 15 Nov 2024 17:17:07 -0500
Subject: [PATCH 2/3] Update compact/ecal/bic/bic_layer1_only.xml
---
compact/ecal/bic/bic_layer1_only.xml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/compact/ecal/bic/bic_layer1_only.xml b/compact/ecal/bic/bic_layer1_only.xml
index 6e5c965da..f7af9f9d6 100644
--- a/compact/ecal/bic/bic_layer1_only.xml
+++ b/compact/ecal/bic/bic_layer1_only.xml
@@ -1,6 +1,6 @@
<!-- SPDX-License-Identifier: LGPL-3.0-or-later -->
<!-- Copyright (C) 2022 Whitney Armstrong, Chao Peng, Maria Zurek, Jihee Kim -->
-<!-- Active AstroPix layers: 1-3-4-6 -->
+<!-- Active AstroPix layers: 1 -->
<lccdd>
From ca69fc951c6bab4abc768c8834aec22d40b28022 Mon Sep 17 00:00:00 2001
From: Sylvester Joosten <sjoosten@anl.gov>
Date: Sat, 16 Nov 2024 14:36:59 -0500
Subject: [PATCH 3/3] add missing closing tag
---
compact/ecal/bic/bic_layer1_only.xml | 1 +
1 file changed, 1 insertion(+)
diff --git a/compact/ecal/bic/bic_layer1_only.xml b/compact/ecal/bic/bic_layer1_only.xml
index f7af9f9d6..10ad35102 100644
--- a/compact/ecal/bic/bic_layer1_only.xml
+++ b/compact/ecal/bic/bic_layer1_only.xml
@@ -175,6 +175,7 @@
</stave>
</layer>
</detector>
+ </detectors>
<readouts>
<readout name="EcalBarrelImagingHits">