-
Notifications
You must be signed in to change notification settings - Fork 7
/
Copy pathsubnodes.config
executable file
·108 lines (68 loc) · 2.72 KB
/
subnodes.config
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
#!/bin/sh
# Config file for subnodes configuration
############################################################
############################################################
############################################################
# MESH STUFF
# FLAGS: y or n
DO_SET_MESH=y
# PARMAS FOR SUBNODES_MESH INIT SCRIPT
MESH_SSID="submesh"
MESH_CHANNEL=3
CELL_ID=02:12:34:56:78:90
MTU=1532
# SET GATEWAY MODE - CLIENT OR SERVER (IF THIS IS A GATEWAY NODE)
GW_MODE="client"
# IP ADDRESS OF GATEWAY NODE
# GW_IP=192.168.100.1
# To-Do: Specify exact device you would like to use for mesh point
#MESH_PHY="phy2"
############################################################
############################################################
############################################################
# IF USING MESH NODE, CREATE BRIDGE FOR MESH AND AP
# START WITH NUMBER 2+ (UNLESS THIS IS A GATEWAY NODE, THEN USE .1)
BRIDGE_IP=10.168.100.2
BRIDGE_NETMASK=255.255.0.0
############################################################
############################################################
############################################################
# HOSTAPD STUFF
# WIRELESS RADIO DRIVER
RADIO_DRIVER=nl80211
# ACCESS POINT
AP_COUNTRY=US
# BE SURE TO USE A UNIQUE NAME
AP_SSID="subnodes$((RANDOM%10000+1))"
# Recommended channels: 1, 6 or 11. Do not use channels 12 or 13 because they won't work with the onboard RPi3 radio
AP_CHAN=6
# START WITH NUMBER 2+ (UNLESS THIS IS A GATEWAY NODE, THEN USE .1)
AP_IP=10.80.100.2
AP_NETMASK=255.255.255.0
# To-Do: Specify exact device you would like to use for access point
#AP_PHY="phy1"
############################################################
############################################################
############################################################
# DNSMASQ STUFF
# SET THE DHCP RANGE IF WE ARE ONLY SETTING UP AN AP
# Keep in mind IP address overlap! Will eventually replace this with Avahi
AP_DHCP_START=10.80.100.101
AP_DHCP_END=10.80.100.254
DHCP_NETMASK=255.255.255.0
DHCP_LEASE=1h
# Configure below if we are joining a mesh network
# SET THE DHCP RANGE IF WE ARE USING A BRIDGE DIRECTING TRAFFIC TO THE MESH OR AP
# Keep in mind IP address overlap! Will eventually replace this with Avahi
BR_DHCP_START=10.168.100.101
BR_DHCP_END=10.168.100.254
# SET THE IP ADDRESS OF THE GATEWAY ROUTER FOR ROUTING BETWEEN NETWORKS
# DHCP_ROUTER=10.168.100.1
# SET THE IP ADDRESS OF THE GATEWAY ROUTER WHICH WE WILL ALSO USE FOR DNS
# DNS=10.168.100.1
############################################################
############################################################
############################################################
# other options could be
# - Other Adapter Names
# ....