diff --git a/README.md b/README.md
new file mode 100644
index 0000000..41e10ec
--- /dev/null
+++ b/README.md
@@ -0,0 +1,92 @@
+# Soundboard
+
+This is a simple, easy-to-use soundboard programmed in Rust. Designed for use with [bwestley/remote-input](https://github.com/bwestley/remote-input).
+
+## Features
+
+* Play multiple sounds simultaneously
+* Pause and resume single or all sound playback
+* Fully configurable from the GUI, all settings are automatically stored in a human-readable config.toml file
+* A client for [bwestley/remote-input](https://github.com/bwestley/remote-input), a rust program that sends keyboard events from a separate linux machine over the network
+
+## QUICK START GUIDE
+
+1. Install <https://github.com/bwestley/remote-input> on a linux device.
+2. Configure the remote input server with a "config.toml" file such as the template in this manual. If a "config.toml" file cannot be found, a default matching this template will be automatically installed.
+3. Start the remote input server.
+4. Open settings.
+5. Set the server address and API key.
+6. Press "Connect" in the main window to connect to the configured remote input server.
+7. Select output devices.
+8. Set keybinds:
+    * To clear: right click.
+    * To set: left click before pressing a key on the remote. Left click again to cancel.
+9. Close settings.
+10. Add a new sound by filling the following fields from left to right before clicking the "Add" button.
+    * Name
+    * Key: see step 8
+    * Volume: drag the slider or enter a number
+    * Path: type in a path or click and drag a file
+11. Click the large toggle switch to enable the soundboard.
+12. On the remote, press the key that was selected in step 10 to play that sound!
+
+## KEY BIND BUTTONS
+
+Key bind buttons store a specific key to trigger behavior when that key is
+    later pressed on that remote.
+To clear: right click.
+To set: left click before pressing a key on the remote. Left click again to
+    cancel.
+
+## SOUNDS
+
+A sound can be added by pressing the "Add" button on the top row of the sounds
+table. The fields will then be moved down into the next row. These can be
+edited at any time. The sound-specific volume and keybind settings take effect
+immediately. Press the "^" or "v" buttons to move the sounds up or down the
+list. The order of sounds has no effect. Press the "Remove" button to delete
+that sound. The indicator on the left of each sound shows if the sound is
+stopped, playing, or paused. When the sound ends, the indicator still shows
+that it is playing. Pressing the pause button (as configured in the settings
+menu under "Shortcuts") will pause all playing sounds. Pressing it again will
+play all paused sounds. Pressing the stop button (as configured...) will stop
+all playing and paused sounds. Pressing the modifier button (as configured...)
+will cause the the next button pressed to resume/pause playback instead of
+restarting play from the beginning of the sound. Pressing the modifier button
+again before pressing a sound button, or pressing a sound button will reset the
+modifier state.
+
+## SETTINGS
+
+The settings menu can be opened with the "Settings" button. When a audio device
+is added or remove from the computer, the audio device list can be updated with
+the "Reload Devices" button. Check the box next to each device audio should
+play from. The server address may be an IP address or DNS name followed by a
+port number (e.g. rpi3.lan:8650 or 192.168.1.58:8650).The remote input server
+api key should match what is in the remote server's config.toml tile. The
+pause, stop, and modifier keybinds can be changed in the "Shortcuts" section.
+See the SOUNDS section of this manual for information on shortcut function and
+the KEY BIND BUTTONS section for instructions on how to configure keybinds.
+
+## REMOTE INPUT SERVER config.toml TEMPLATE
+
+```toml
+[hardware]
+# The name of the keyboard device as reported by evdev:
+name = "Logitech USB Keyboard"
+# The status light blink duration in milliseconds
+led_speed_millis = 3000
+# See https://github.com/torvalds/linux/blob/master/include/uapi/linux/
+# input-event-codes.h for key names.
+# The escape key will ungrab and grab the input device.
+escape = "KEY_SCROLLLOCK"
+# The pause key will pause and unpause event transmission.
+pause = "KEY_PAUSE"
+
+[server]
+# The bind address for the remote input server:
+address = "0.0.0.0:8650"
+# The api key (terminated by a zero byte) must be sent by
+# the client when the connection is established.
+api_key = "d4AXBDqWa0PQgsGVc4oKnguYA4jEfu5EM7ztD7to"
+```