Different BMS's

[N7MQ]

Hi!
Does this project support the use of multiple BMS's? I have SOK batteries that use a Pace BMS and some SEPLOS batteries that use the v3 of their BMS. I have been able to successfully communicate with the seplos BMS, but when I add the SOK batteries the program doesn't try and open the port for them. I have the BMS's listed separately as /dev/ttyUSB0 and /dev/ttyUSB1. In the log the program opens the port /dev/ttyUSB0 successfully but does not attempt to open /dev/ttyUSB1 for the PACE BMS.

Thank You

[ai-republic]

Hi @N7MQ,
yes, the application supports any number of BMSes (same or mixed). Could you run the application (without webserver) in wiith debug log level enabled and attach the log file please?

[N7MQ]

Thanks for the help!. Please see the enclosed. I have also included my config.properties files also.

BMS-to-Inverter.log
config.txt

[ai-republic]

Have you tried it with just one BMS connected first. Let's try only one BMS connected first to ttyUSB0 and see if you get any results. The do the same with only one BMS connected to ttyUSB1