No data and errors for Vibration Sensor TS0210 _TZ3000_lzdjjfss Tuya TS0210

[rursache]

hello,

i bought and setup this vibration sensor:
Tuya TS0210
TS0210 _TZ3000_lzdjjfss

however there is no data except the "vibration" bool which works as expected:

this error appears when changing the sensitivity:

Publish 'set' 'sensitivity' to '0xa4c138219dd60230' failed: 'Error: ZCL command 0xa4c138219dd60230/1 ssIasZone.write({"currentZoneSensitivityLevel":12}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Timeout - 31713 - 1 - 12 - 1280 - 4 after 10000ms)'

It also said something about the value being a String not a Int or vice-versa but haven't catched that error since

i think it's just a mapping error because the image is also wrong as the device is actually rounded:

[github-actions]

This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days

[rursache]

the issue is still happening.

[kevincaradant]

Thank you in advance for your help @Koenkk . Best regards.

In my case, I do have the correct picture. However, all the other issues mentioned in this thread apply to my situation as well.

[jimbo123-ha]

Just thought I'd add a comment here,.. I have a similar sensor, also found a very similar error when trying to set the sensitivity, which is what lead me here.

But now I'm guessing it may be expected behaviour, as the sensor is not 'an always connected' device; I am able to set the sensitivity if I intentionally trigger the vibration and making the setting change close together.

info 2025-02-05 11:54:40z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Vibration (washing machine)', payload '{"battery":null,"battery_low":false,"linkquality":109,"sensitivity":25,"tamper":false,"vibration":false,"voltage":null}'
info 2025-02-05 12:00:46z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Vibration (washing machine)', payload '{"battery":null,"battery_low":false,"linkquality":105,"sensitivity":25,"tamper":false,"vibration":true,"voltage":null}'
info 2025-02-05 12:00:46z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Vibration (washing machine)', payload '{"battery":null,"battery_low":false,"linkquality":109,"sensitivity":25,"tamper":false,"vibration":true,"voltage":null}'
info 2025-02-05 12:00:47z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Vibration (washing machine)', payload '{"battery":null,"battery_low":false,"linkquality":109,"sensitivity":30,"tamper":false,"vibration":true,"voltage":null}'
info 2025-02-05 12:02:16z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Vibration (washing machine)', payload '{"battery":null,"battery_low":false,"linkquality":109,"sensitivity":30,"tamper":false,"vibration":false,"voltage":null}'

EDIT: And have now just noticed that Zigbee2MQTT settings actually says: "Press button on the device right before changing this"

[kevincaradant]

Hi
I already tried to click on the button and change the sensitivity Just after that.
It doesn't work on my side. I will try again today to be sure.
Regards.

[jimbo123-ha]

Hi I already tried to click on the button and change the sensitivity Just after that. It doesn't work on my side. I will try again today to be sure. Regards.

Only button mine had was the pairing one,... so I just triggered the 'vibration'.