INSTALL.txt

# Installing Pure Data

This README file contains info for installing Pure Data from source.

Pd is built on the commandline using traditional Unix-style tools. The source
distribution comes with two build systems:

* autotools: easy to use, many compilation options, recommended for most users
* makefile: smaller & simpler, used for Pd binary downloads

## Requirements

Core build requirements:

* Unix command shell: bash, dash, etc
* C compiler chain: gcc/clang & make

Core runtime requirements:

* Tcl/Tk: Tk wish shell

Optional features:

* autotools: autconf, automake, & libtool (if building with the autotools)
* gettext: build localizations in the po directory
* JACK: audio server support
* FFTW: use the optimized FFTW Fast Fourier Transform library

## Autotools Build (recommended)

Building Pd using the GNU autotools involves the following steps for all
platforms:

1. configure: detect & set library and platform options
2. make: compile Pd, associated tools, and resource files (ie. translations)
3. install: install the Pd binaries and resources onto your system

Overview:

    cd path/to/pd
    ./autogen.sh
    ./configure
    make

Note: Additional platform-specific options and build targets are listed in
following subsections.

Start by opening a commandline shell and navigating to the Pd source directory:

    cd path/to/pd

First generate the configure script and various build files by running:

    ./autogen.sh

Next configure Pd with the default options for your platform:

    ./configure

You can verify the configuration options that the configure step script prints:

    pd 0.47.1 is now configured

    Platform:             Mac OSX
    Debug build:          no
    Universal build:      no
    Localizations:        no
    Source directory:     .
    Installation prefix:  /usr/local

    ...

    audio APIs:           PortAudio
    midi APIs:            PortMidi

If you want to change these options, you can specify/override the configure
script settings on the commandline:

    # change install prefix to /usr
    ./configure --prefix /usr

    # build Pd with the JACK audio server backend
    ./configure --enable-jack

    # build Pd using a system installed PortAudio
    ./configure --without-local-portaudio

An important configure option for some platforms is --enable-universal which
allows you to specify the desired architecture(s) when building Pd. For Intel
and AMD processors, 32 bit is called "i386" and 64 bit is "x86_64". By default,
Pd is built for the architecture of the current system, however you may want a
32 bit Pd to work with existing 32 bit externals on a 64 bit system. You can
override the defaults with --enable-universal:

    # build 32 bit Pd
    ./configure --enable-universal=i386

    # build 64 bit Pd
    ./configure --with-universal=x86_64

The full list of available configuration options can printed by running:

    ./configure --help

Now that Pd is configured, build by running:

    make

Building should take a minute or two. If compilation was successful, you can
run Pd from the build directory without installing it:

    cd bin
    ./pd

To install to your system using the configuration prefix (default /usr/local):

    sudo make install

You can also to a custom location via:

    make install DESTDIR=~/pd-xxx prefix=/

Once installed, you should now be able to run Pd from the commandline:

    pd

If want to uninstall, make sure Pd is configured and then run:

    sudo make uninstall

If you compiled Pd using the --enable-universal configure option and want to
double check which architectures Pd was built with, use the "file" command:

    # examine binary in the src directory
    file src/pd
    ...
    src/pd: Mach-O 64-bit executable x86_64

    # look at pd inside a macOS .app bundle
    file Pd.app/Contents/Resources/bin/pd
    ...
    Pd-0.47.1.app/Contents/Resources/bin/pd: Mach-O 64-bit executable x86_64

### Linux

Platform requirements:

* ALSA: Linux sound library (recommended)
* OSS: historical precursor to ALSA, generally not used
* JACK: JACK audio server (optional)

Install the core build requirements using your distribution's package manager.
For Debian, you can install the compiler chain, autotools, & gettext with:

    sudo apt-get install build-essential automake autoconf libtool gettext

For libraries, you will need to install the "development" versions which include
the source code header files. In Debian, the ALSA development package is called
"libasound2-dev":

    sudo apt-get install libasound2-dev

Similarly, optional development libraries can be also be installed to for
additional features. Install the JACK development files on Debian:

    sudo apt-get install libjack-jackd2-dev

In case you are using jackd1 instead of jackd2, use:

    sudo apt-get install libjack-dev

Most distributions come with Tcl/Tk installed, so you should be able to run Pd
after it is built.

Once your build system is set up, you can follow the general autotools build
steps to build Pd.

### macOS

macOS is built on top of a BSD system and the bash commandline can be accessed
with the Terminal application in the /Applications/Utility directory.

The clang compiler and associated tools are provided by Apple. If you are
running macOS 10.9+, you *do not* need to install the full Xcode application and
can install the Commandline Tools Package only by running the following:

    xcode-select --install

If you are running macOS 10.6 - 10.8, you will need to install Xcode
from the Mac App Store or downloaded from http://developer.apple.com

Tcl/Tk is already included macOS.

To install the autotools, gettext, and libraries for additional features,
you can use one of the open source package managers for macOS:

* homebrew: https://brew.sh (recommended)
* macports: https://www.macports.org

Follow the package manager set up instructions and then install the software you
need. For example, to install the autotools & gettext using Homebrew:

    brew install automake autoconf libtool pkg-config gettext
    brew link --force gettext

By default, Pd is built for the current system architecture, usually 64 bit. If
you want to override this you can use the --enable-universal configure option
which allows you to specify the desired architecture(s) when building Pd. For
Intel/AMD processors, 32 bit is called "i386" and 64 bit is "x86_64". For Apple
Silicon processors (M1, M2, etc), the 64 bit architecture is called "arm64". By
default, Pd is built for the architecture of the current system, however you may
want a 32 bit Pd to work with existing 32 bit externals on a 64 bit system. You
can override the defaults with --enable-universal:
you want to override this you can use the --enable-universal configure option,
as mentioned in the main Autotools Build section. On macOS, running this option
without arguments will build a "fat" Pd for all architectures supported by the
compiler:

* macOS 10.6: i386, x86_64, ppc
* macOS 10.7+: i386, x86_64
* macOS 10.15: x86_64
* macOS 11+: x86_64, arm64

Note: a "fat" Pd may not work on all systems and/or be able to load both 32 or
64 bit externals. Additionally, you can specify multiple architectures directly:

    # build a "fat" Pd for both 32 and 64 bit Intel
    # may not work on all systems
    ./configure --enable-universal=i386,x86_64

    # build a "fat" Pd for all detected architectures (macOS: i386, x86_64, ppc)
    # may not work on all systems
    ./configure --enable-universal

The JACK audio server is supported by Pd on macOS. By default, Pd can use either
the offical 64-bit builds for macOS 10.12+ from https://jackaudio.org or the
older, 32-bit Jack OS X runtime framework if one is installed on the system.
Optionally, Pd can also be built with Jack installed via Homebrew or Macports,
however the runtime framework support must be disabled:

    brew install jack
    ./configure --disable-jack-framework --enable-jack

You should now be ready to build Pd by following the general autotools build
steps. Once built, there are two options for installation:

* build a standalone macOS application (recommended)
* install to your system as a commandline program

To build the Pd macOS application, simply run:

    make app

This builds Pd-#.##.#.app in the Pd source directory which can be then be
double-clicked and/or copied to /Applications. For more info & options regarding
the Pd .app bundle, see mac/README.txt

If you want to have both the Pd application *and* use Pd from the commandline,
add command aliases to the binaries inside the .app to your ~/.bash_profile:

# pd commandline
WHICHPD="Pd-0.47-1"
alias pd="/Applications/$WHICHPD.app/Contents/Resources/bin/pd"
alias pdsend="/Applications/$WHICHPD.app/Contents/Resources/bin/pdsend"
alias pdreceive="/Applications/$WHICHPD.app/Contents/Resources/bin/pdreceive"

Next, reload the profile by either opening a new Terminal window or running:

    source ~/.bash_profile

If you install Pd to your system with "make install", the Tk 8.5.9 currently
included with the system (as of macOS 10.14) is buggy and should *not* be used.
It is recommended to install a newer version, either via Homebrew or from the
ActiveState Tcl/Tk downloads.

To see which version the Pd GUI is using: set the log level to 4 & look for the
Tk version log line in the Pd window.

Another option is to set the Tk Wish command Pd uses to launch the GUI. At
start, Pd does a quick search in the "usual places" for Wish and chooses the
first path that exists. Versions of macOS up to 10.12 also ship with Tcl/Tk 8.4
which works fine and this wish can be invoked by Pd using the full path
"/usr/bin/wish8.4". You can configure Pd to use this search path first with:

    ./configure --with-wish=/usr/bin/wish8.4

To see Pd's path search info, run Pd with the -verbose flag:

    pd -verbose

Note: Pd installed to your system or run from the build/bin directory will not
use the default font and will be missing the various macOS GUI hints (such as
retina rendering) which are specified by the Info.plist file inside the .app
bundle. Again, it is recommended to build a .app and use the aforementioned
aliases to provide the pd command.

### Windows

Pd on Windows can be built with either MinGW or Cygwin which provide the
core build requirements: a compiler chain & shell environment.

It is recommended to use the Msys2 distribution which provides both a Unix
command shell and MinGW. Download the Msys2 "x86_64" 64 bit installer (or "i686"
if you are using 32 bit Windows) from:

    http://www.msys2.org/

Then install to the default location (C:\msys32 or C:\msys64) and follow the
setup/update info on the Msys2 webpage.

Msys2 provides both 32 and 64 MinGW and command shells. As of Pd 0.50, the Pd
release is 64 bit for Windows, so it is recommended to set up and use the MinGW
64 bit shell. If you want to build a 32 bit Pd, similarly use the MinGW 32 bit
shell. Due to how MinGW is designed, you cannot build a 64 bit Pd with a 32 bit
MinGW and vice versa. This also means the Pd configure --enable-universal build
option has no effect in MinGW.

Note: Msys2 development seems to change frequently, so some of the package names
      below may have changed after this document was written.

Open an Msys2 shell and install the compiler chain, autotools, & gettext via:

    # 64 bit
    pacman -S mingw-w64-x86_64-toolchain mingw-w64-x86_64-clang \
              make autoconf automake libtool \
              mingw-w64-x86_64-gettext

    # 32 bit
    pacman -S mingw-w64-i686-toolchain mingw-w64-i686-clang \
              make autoconf automake libtool \
              mingw-w64-i686-gettext

Install git if you want to clone the Pd sources from Github, etc:

    pacman -S git

and/or the nsis installer tool if you want to build the Pd Windows installer:

    # 64 bit
    pacman -S mingw-w64-x86_64-nsis

    # 32 bit
    pacman -S mingw-w64-i686-nsis

Note: You can also search for packages in Msys2 with:

    pacman -S -s <searchterm>

Once the packages are installed, you should now be ready to build Pd by
following the general autotools build steps.

The following audio APIS are available on Windows and can be enabled/disabled
via their configure flags:

* MMIO: --enable-mmio or --disable-mmio (default enabled)
* ASIO: --enable-asio or --disable-asio (default enabled, if found)
* JACK: --enable-jack or --disable-jack

For example, to build Pd without MMIO support:

    ./configure --disable-mmio

Note: Because of license restrictions, Pd cannot distribute the ASIO SDK source
files. If you want to build Pd with ASIO support, see asio/README.txt for
further instructions.

Once built Pd is built, you can either:

* build a Pd application directory for Windows (recommended)
* build a Windows installer

A Pd application directory is essentially a self-contained Pd package which
should run out of the box. To build, simply use:

    make app

This will create a "pd-VERSION" directory (ie. pd-0.48.1) which can then be used
by running pd.exe in the bin directory and placed wherever on your system. For
more info & options regarding the Pd app directory, see msw/README.txt

To build a .msi Windows installer for Pd, see msw/build-nsi.sh.

Note: The standard "make install" requires Tcl/Tk and won't work outside your
Cygwin/Msys2 environment (if at all).

### Cross-compilation for Windows on Linux

You can also build a Windows binary of Pd on a Linux system, using a
cross-compilation toolchain.

For Debian based systems (e.g. Ubuntu), you can install the toolchain with:

    sudo apt-get install build-essential automake autoconf libtool gettext
    sudo apt-get install mingw-w64 mingw-w64-tools
    sudo apt-get install nsis

The "mingw-w64" package will install the cross compilation toolchains for both
32bit (g++-mingw-w64-i686, binutils-mingw-w64-i686) and
64bit (g++-mingw-w64-x86-64, binutils-mingw-w64-x86-64).

The "nsis" package is purely optional, and only needed if you want to build the
installer.

You must tell configure that you want to cross-compile for a given architecture
via the "--host" configure flag.

For example, to build a 32 bit Pd:

    ./configure --host=i686-w64-mingw32

Similarly, to build a 64 bit Pd without ASIO support:

    ./configure --disable-asio --host=x86_64-w64-mingw32

If all went well, you should now be ready to build Pd, as explained in the
instructions above in the "Windows" section:

    make app

### BSD

Building Pd for the various BSD variants is similar to the Linux way.
The major difference is the used package manager (and the names of the packages),
you'll want to install.

### FreeBSD

(Tested on FreeBSD-13)

Install the core build requirements:

    sudo pkg install gcc automake autoconf libtool gettext gmake

You may install one (or more) libraries (depending on your needs).
It seems that with FreeBSD-13, there are ALSA and JACK packages available:

    sudo pkg install alsa-lib jackit

Once your build system is set up, you can follow the general autotools build
steps to build Pd, but make sure to use `gmake` (aka "GNU make").
The ordinary BSD `make` will not suffice!

    ./autogen.sh
    ./configure --deken-os=FreeBSD MAKE=gmake
    gmake

    sudo gmake install

### OpenBSD

(Tested on OpenBSD-7)

Install the core build requirements:

    sudo pkg_add gcc automake autoconf libtool gettext-tools gmake

(If there are multiple versions for one or more of the packages, pick your favourite or the newest one).


You may install one (or more) libraries (depending on your needs).
It seems that with OpenBSD-7, there are only JACK packages available:

    sudo pkg_add jack

By default, OpenBSD installs all its packages into `/usr/local/`,
but the compiler does not look for headers resp. libraries in this directory.
We can instruct autotools to automatically consider these directories
by creating a file '/usr/local/share/config.site':

    cat | sudo tee /usr/local/share/config.site>/dev/null << EOF
    CPPFLAGS="-I/usr/local/include \$CPPFLAGS"
    LDFLAGS="-L/usr/local/lib \$LDFLAGS"
    EOF

Also, because OpenBSD allows to coinstall multiple versions of the autotools (with no "default"),
we must specify which version we want to use:

   export AUTOCONF_VERSION=$(ls -S /usr/local/bin/autoconf-* | sed -e 's|.*-||' | sort -n | tail -1)
   export AUTOMAKE_VERSION=$(ls -S /usr/local/bin/automake-* | sed -e 's|.*-||' | sort -n | tail -1)

Now that your build system is set up, you can follow the general autotools build
steps to build Pd, but make sure to use `gmake` (aka "GNU make").
The ordinary BSD `make` will not suffice!

    ./autogen.sh
    ./configure --deken-os=OpenBSD --enable-jack MAKE=gmake
    gmake

    sudo gmake install

### NetBSD

(Tested on NetBSD-9)

Install the core build requirements:

    sudo pkgin install gcc automake autoconf libtool gettext-tools gmake

You may install one (or more) libraries (depending on your needs).
It seems that with NetBSD-9, there are JACK and ALSA packages available,
but the ALSA packages seem to be broken. OSS appears to be built-in.

    sudo pkgin install jack

By default, NetBSD installs all its packages into `/usr/pkg/`,
but the compiler does not look for headers resp. libraries in this directory.
We can instruct autotools to automatically consider these directories
by creating a file '/usr/pkg/share/config.site':

    cat | sudo tee /usr/pkg/share/config.site>/dev/null << EOF
    CPPFLAGS="-I/usr/pkg/include \$CPPFLAGS"
    LDFLAGS="-L/usr/pkg/lib -Wl,-R/usr/pkg/lib \$LDFLAGS"
    EOF

Now that your build system is set up, you can follow the general autotools build
steps to build Pd, but make sure to use `gmake` (aka "GNU make").
The ordinary BSD `make` will not suffice!

    ./autogen.sh
    ./configure --deken-os=NetBSD --prefix=/usr/pkg --disable-alsa --enable-jack MAKE=gmake
    gmake

    sudo gmake install

## Makefile Build

Alternatively, and often more simply, to the autotools build, you can use the
fallback makefiles in the src directory:

* src/makefile.gnu: GNU/Linux
* src/makefile.mac: macOS
* src/makefile.msvc: Windows with Microsoft Visual C
* src/makefile.mingw: Windows with MinGW GCC

On Linux, for example, run the GNU-specific makefile in the src directory:

    cd src
    make -f makefile.gnu

You can then run directly out of the bin directory without installing:

    cd ../bin
    ./pd

For Microsoft Visual C, first build Pd with the MS VC makefile and then build
each external in the extra directory:

    cd src
    make -f makefile.msvc
    cd ../extra/bob~
    make pd_nt
    cd ../bonk~ && make pd_nt
    cd ../choice && make pd_nt
    cd ../fiddle~ && make pd_nt
    ...

To install Pd to your system on Linux, macOS, & MinGW (Windows), use the
"install" makefile target. For Linux, this is:

    make -f makefile.gnu install

Once installed, you should now be able to run Pd from the commandline:

    pd

If want to uninstall, simply run the "uninstall" makefile target:

    make -f makefile.gnu uninstall

On macOS, you can build a clickable Pd .app bundle using the supplemental build
scripts in the mac directory. See mac/README.txt for more info.

## Reporting Bugs

Let us know if you run into any bugs or issues with building or installing Pd:

* send an email: https://lists.puredata.info/listinfo
* post to the Pd forum: https://forum.pdpatchrepo.info
* create a bugreport: https://bugs.puredata.info
* open an issue: https://github.com/pure-data/pure-data/issues

Please include information involved with your problem such as:

* information about your system: OS version, libraries installed, etc
* configure or make output including error lines
* steps you took: configuration options, etc