raspberrypi3_defconfig

BR2_arm=y
BR2_cortex_a53=y
BR2_ARM_FPU_NEON_VFPV4=y

BR2_TOOLCHAIN_BUILDROOT_CXX=y

BR2_SYSTEM_DHCP="eth0"

# Linux headers same as kernel, a 5.10 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y

BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"

# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"

BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3/config_3.txt"

# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y

# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"