Skip to content

Latest commit

 

History

History
72 lines (50 loc) · 2.37 KB

without_docker.md

File metadata and controls

72 lines (50 loc) · 2.37 KB

Imagination Technologies Limited logo

Creator System Test Framework

Prerequisites (Without Docker - DEPRECATED)

WARNING: Tayga is unstable on some operating systems and may not correctly set up a NAT64 service, causing the simulated constrained device to not be able to access the cloud. Docker is recommended.

Note: the instructions below are assuming an Ubuntu host.

  1. Clone this repository as well as its submodules.
    $ git clone --recursive https://github.com/CreatorDev/creator-system-test-framework.git creator-system-test-framework
  1. Build the AwaLWM2M development suite in a directory of your choice by following the instructions in the readme.
    $ cd DeviceManegementTests/AwaLWM2M
    $ make
    $ cd ..
  1. Build the minimal-net Contiki client
    $ cd lwm2m-contiki/lwm2m-client-contiki-test
    $ make TARGET=minimal-net
    $ cd ../..
  1. Ensure configs/local_simulated.yml (or copy it and create your own) contains the correct paths to your LWM2M repository, and change the following constants:
    CLIENT_ID
    userName
  1. Install required python libraries
    $ pip install -r requirements.txt
  1. Install Tayga
    $ sudo apt-get install tayga
    $ sudo mkdir -p /var/db

Running the Test Framework

Firstly, launch the helpers. Root/sudo is required in order to manipulate the network interfaces on the Contiki simulated constrained device.

The proxies that the devices connect to defined in configs/local_simulated.yml must match the address and port of the running helpers, otherwise the test framework will not be able to connect to a helper it requires in order to complete a test.

    $ PYTHONPATH=.:$PYTHONPATH python helpers/bootstrap_server_test_helper.py --ip 127.0.0.1 --port 4442 --log xmlrpcserver_bootstrap_local.log
    $ PYTHONPATH=.:$PYTHONPATH python helpers/gateway_server_test_helper.py --ip 127.0.0.1 --port 4342 --log xmlrpcserver_gateway_server_local.log
    $ PYTHONPATH=.:$PYTHONPATH python helpers/gateway_client_test_helper.py --ip 127.0.0.1 --port 4242 --log xmlrpcserver_gateway_client_local.log
    $ sudo PYTHONPATH=.:$PYTHONPATH python helpers/constrained_client_test_helper.py --ip 127.0.0.1 --port 4142 --log xmlrpcserver_constrained_client_local.log

Run the tests with:

$ PYTHONPATH=.:$PYTHONPATH ./noserunner.py -svv --tc-file configs/local_simulated.yml