jonesforth.S

/*	A sometimes minimal FORTH compiler and tutorial for Linux / i386 systems. -*- asm -*-
	By Richard W.M. Jones <rich@annexia.org> http://annexia.org/forth
	This is PUBLIC DOMAIN (see public domain release statement below).
	$Id: jonesforth.S,v 1.47 2009-09-11 08:33:13 rich Exp $

	gcc -m32 -nostdlib -static -Wl,-Ttext,0 -Wl,--build-id=none -o jonesforth jonesforth.S
*/
	.set JONES_VERSION,47
/*
	INTRODUCTION ----------------------------------------------------------------------

	FORTH is one of those alien languages which most working programmers regard in the same
	way as Haskell, LISP, and so on.  Something so strange that they'd rather any thoughts
	of it just go away so they can get on with writing this paying code.  But that's wrong
	and if you care at all about programming then you should at least understand all these
	languages, even if you will never use them.

	LISP is the ultimate high-level language, and features from LISP are being added every
	decade to the more common languages.  But FORTH is in some ways the ultimate in low level
	programming.  Out of the box it lacks features like dynamic memory management and even
	strings.  In fact, at its primitive level it lacks even basic concepts like IF-statements
	and loops.

	Why then would you want to learn FORTH?  There are several very good reasons.  First
	and foremost, FORTH is minimal.  You really can write a complete FORTH in, say, 2000
	lines of code.  I don't just mean a FORTH program, I mean a complete FORTH operating
	system, environment and language.  You could boot such a FORTH on a bare PC and it would
	come up with a prompt where you could start doing useful work.  The FORTH you have here
	isn't minimal and uses a Linux process as its 'base PC' (both for the purposes of making
	it a good tutorial). It's possible to completely understand the system.  Who can say they
	completely understand how Linux works, or gcc?

	Secondly FORTH has a peculiar bootstrapping property.  By that I mean that after writing
	a little bit of assembly to talk to the hardware and implement a few primitives, all the
	rest of the language and compiler is written in FORTH itself.  Remember I said before
	that FORTH lacked IF-statements and loops?  Well of course it doesn't really because
	such a lanuage would be useless, but my point was rather that IF-statements and loops are
	written in FORTH itself.

	Now of course this is common in other languages as well, and in those languages we call
	them 'libraries'.  For example in C, 'printf' is a library function written in C.  But
	in FORTH this goes way beyond mere libraries.  Can you imagine writing C's 'if' in C?
	And that brings me to my third reason: If you can write 'if' in FORTH, then why restrict
	yourself to the usual if/while/for/switch constructs?  You want a construct that iterates
	over every other element in a list of numbers?  You can add it to the language.  What
	about an operator which pulls in variables directly from a configuration file and makes
	them available as FORTH variables?  Or how about adding Makefile-like dependencies to
	the language?  No problem in FORTH.  How about modifying the FORTH compiler to allow
	complex inlining strategies -- simple.  This concept isn't common in programming languages,
	but it has a name (in fact two names): "macros" (by which I mean LISP-style macros, not
	the lame C preprocessor) and "domain specific languages" (DSLs).

	This tutorial isn't about learning FORTH as the language.  I'll point you to some references
	you should read if you're not familiar with using FORTH.  This tutorial is about how to
	write FORTH.  In fact, until you understand how FORTH is written, you'll have only a very
	superficial understanding of how to use it.

	So if you're not familiar with FORTH or want to refresh your memory here are some online
	references to read:

	http://en.wikipedia.org/wiki/Forth_%28programming_language%29

	http://galileo.phys.virginia.edu/classes/551.jvn.fall01/primer.htm

	http://wiki.laptop.org/go/Forth_Lessons

	http://www.albany.net/~hello/simple.htm

	Here is another "Why FORTH?" essay: http://www.jwdt.com/~paysan/why-forth.html

	Discussion and criticism of this FORTH here: http://lambda-the-ultimate.org/node/2452

	ACKNOWLEDGEMENTS ----------------------------------------------------------------------

	This code draws heavily on the design of LINA FORTH (http://home.hccnet.nl/a.w.m.van.der.horst/lina.html)
	by Albert van der Horst.  Any similarities in the code are probably not accidental.

	Some parts of this FORTH are also based on this IOCCC entry from 1992:
	http://ftp.funet.fi/pub/doc/IOCCC/1992/buzzard.2.design.
	I was very proud when Sean Barrett, the original author of the IOCCC entry, commented in the LtU thread
	http://lambda-the-ultimate.org/node/2452#comment-36818 about this FORTH.

	And finally I'd like to acknowledge the (possibly forgotten?) authors of ARTIC FORTH because their
	original program which I still have on original cassette tape kept nagging away at me all these years.
	http://en.wikipedia.org/wiki/Artic_Software

	PUBLIC DOMAIN ----------------------------------------------------------------------

	I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

	In case this is not legally possible, I grant any entity the right to use this work for any purpose,
	without any conditions, unless such conditions are required by law.

	SETTING UP ----------------------------------------------------------------------

	Let's get a few housekeeping things out of the way.  Firstly because I need to draw lots of
	ASCII-art diagrams to explain concepts, the best way to look at this is using a window which
	uses a fixed width font and is at least this wide:

 <------------------------------------------------------------------------------------------------------------------------>

	Secondly make sure TABS are set to 8 characters.  The following should be a vertical
	line.  If not, sort out your tabs.

		|
	        |
	    	|

	Thirdly I assume that your screen is at least 50 characters high.

	ASSEMBLING ----------------------------------------------------------------------

	If you want to actually run this FORTH, rather than just read it, you will need Linux on an
	i386.  Linux because instead of programming directly to the hardware on a bare PC which I
	could have done, I went for a simpler tutorial by assuming that the 'hardware' is a Linux
	process with a few basic system calls (read, write and exit and that's about all).  i386
	is needed because I had to write the assembly for a processor, and i386 is by far the most
	common.  (Of course when I say 'i386', any 32- or 64-bit x86 processor will do.  I'm compiling
	this on a 64 bit AMD Opteron).

	Again, to assemble this you will need gcc and gas (the GNU assembler).  The commands to
	assemble and run the code (save this file as 'jonesforth.S') are:

	gcc -m32 -nostdlib -static -Wl,-Ttext,0 -Wl,--build-id=none -o jonesforth jonesforth.S
	cat jonesforth.f - | ./jonesforth

	If you want to run your own FORTH programs you can do:

	cat jonesforth.f myprog.f | ./jonesforth

	If you want to load your own FORTH code and then continue reading user commands, you can do:

	cat jonesforth.f myfunctions.f - | ./jonesforth

	ASSEMBLER ----------------------------------------------------------------------

	(You can just skip to the next section -- you don't need to be able to read assembler to
	follow this tutorial).

	However if you do want to read the assembly code here are a few notes about gas (the GNU assembler):

	(1) Register names are prefixed with '%', so %eax is the 32 bit i386 accumulator.  The registers
	    available on i386 are: %eax, %ebx, %ecx, %edx, %esi, %edi, %ebp and %esp, and most of them
	    have special purposes.

	(2) Add, mov, etc. take arguments in the form SRC,DEST.  So mov %eax,%ecx moves %eax -> %ecx

	(3) Constants are prefixed with '$', and you mustn't forget it!  If you forget it then it
	    causes a read from memory instead, so:
	    mov $2,%eax		moves number 2 into %eax
	    mov 2,%eax		reads the 32 bit word from address 2 into %eax (ie. most likely a mistake)

	(4) gas has a funky syntax for local labels, where '1f' (etc.) means label '1:' "forwards"
	    and '1b' (etc.) means label '1:' "backwards".  Notice that these labels might be mistaken
	    for hex numbers (eg. you might confuse 1b with $0x1b).

	(5) 'ja' is "jump if above", 'jb' for "jump if below", 'je' "jump if equal" etc.

	(6) gas has a reasonably nice .macro syntax, and I use them a lot to make the code shorter and
	    less repetitive.

	For more help reading the assembler, do "info gas" at the Linux prompt.

	Now the tutorial starts in earnest.

	THE DICTIONARY ----------------------------------------------------------------------

	In FORTH as you will know, functions are called "words", and just as in other languages they
	have a name and a definition.  Here are two FORTH words:

	: DOUBLE DUP + ;		\ name is "DOUBLE", definition is "DUP +"
	: QUADRUPLE DOUBLE DOUBLE ;	\ name is "QUADRUPLE", definition is "DOUBLE DOUBLE"

	Words, both built-in ones and ones which the programmer defines later, are stored in a dictionary
	which is just a linked list of dictionary entries.

	<--- DICTIONARY ENTRY (HEADER) ----------------------->
	+------------------------+--------+---------- - - - - +----------- - - - -
	| LINK POINTER           | LENGTH/| NAME	      | DEFINITION
	|			 | FLAGS  |     	      |
	+--- (4 bytes) ----------+- byte -+- n bytes  - - - - +----------- - - - -

	I'll come to the definition of the word later.  For now just look at the header.  The first
	4 bytes are the link pointer.  This points back to the previous word in the dictionary, or, for
	the first word in the dictionary it is just a NULL pointer.  Then comes a length/flags byte.
	The length of the word can be up to 31 characters (5 bits used) and the top three bits are used
	for various flags which I'll come to later.  This is followed by the name itself, and in this
	implementation the name is rounded up to a multiple of 4 bytes by padding it with zero bytes.
	That's just to ensure that the definition starts on a 32 bit boundary.

	A FORTH variable called LATEST contains a pointer to the most recently defined word, in
	other words, the head of this linked list.

	DOUBLE and QUADRUPLE might look like this:

	  pointer to previous word
	   ^
	   |
	+--|------+---+---+---+---+---+---+---+---+------------- - - - -
	| LINK    | 6 | D | O | U | B | L | E | 0 | (definition ...)
	+---------+---+---+---+---+---+---+---+---+------------- - - - -
           ^       len                         padding
	   |
	+--|------+---+---+---+---+---+---+---+---+---+---+---+---+------------- - - - -
	| LINK    | 9 | Q | U | A | D | R | U | P | L | E | 0 | 0 | (definition ...)
	+---------+---+---+---+---+---+---+---+---+---+---+---+---+------------- - - - -
           ^       len                                     padding
           |
           |
	  LATEST

	You should be able to see from this how you might implement functions to find a word in
	the dictionary (just walk along the dictionary entries starting at LATEST and matching
	the names until you either find a match or hit the NULL pointer at the end of the dictionary);
	and add a word to the dictionary (create a new definition, set its LINK to LATEST, and set
	LATEST to point to the new word).  We'll see precisely these functions implemented in
	assembly code later on.

	One interesting consequence of using a linked list is that you can redefine words, and
	a newer definition of a word overrides an older one.  This is an important concept in
	FORTH because it means that any word (even "built-in" or "standard" words) can be
	overridden with a new definition, either to enhance it, to make it faster or even to
	disable it.  However because of the way that FORTH words get compiled, which you'll
	understand below, words defined using the old definition of a word continue to use
	the old definition.  Only words defined after the new definition use the new definition.

	DIRECT THREADED CODE ----------------------------------------------------------------------

	Now we'll get to the really crucial bit in understanding FORTH, so go and get a cup of tea
	or coffee and settle down.  It's fair to say that if you don't understand this section, then you
	won't "get" how FORTH works, and that would be a failure on my part for not explaining it well.
	So if after reading this section a few times you don't understand it, please email me
	(rich@annexia.org).

	Let's talk first about what "threaded code" means.  Imagine a peculiar version of C where
	you are only allowed to call functions without arguments.  (Don't worry for now that such a
	language would be completely useless!)  So in our peculiar C, code would look like this:

	f ()
	{
	  a ();
	  b ();
	  c ();
	}

	and so on.  How would a function, say 'f' above, be compiled by a standard C compiler?
	Probably into assembly code like this.  On the right hand side I've written the actual
	i386 machine code.

	f:
	  CALL a			E8 08 00 00 00
	  CALL b			E8 1C 00 00 00
	  CALL c			E8 2C 00 00 00
	  ; ignore the return from the function for now

	"E8" is the x86 machine code to "CALL" a function.  In the first 20 years of computing
	memory was hideously expensive and we might have worried about the wasted space being used
	by the repeated "E8" bytes.  We can save 20% in code size (and therefore, in expensive memory)
	by compressing this into just:

	08 00 00 00		Just the function addresses, without
	1C 00 00 00		the CALL prefix.
	2C 00 00 00

	On a 16-bit machine like the ones which originally ran FORTH the savings are even greater - 33%.

	[Historical note: If the execution model that FORTH uses looks strange from the following
	paragraphs, then it was motivated entirely by the need to save memory on early computers.
	This code compression isn't so important now when our machines have more memory in their L1
	caches than those early computers had in total, but the execution model still has some
	useful properties].

	Of course this code won't run directly on the CPU any more.  Instead we need to write an
	interpreter which takes each set of bytes and calls it.

	On an i386 machine it turns out that we can write this interpreter rather easily, in just
	two assembly instructions which turn into just 3 bytes of machine code.  Let's store the
	pointer to the next word to execute in the %esi register:

		08 00 00 00	<- We're executing this one now.  %esi is the _next_ one to execute.
	%esi -> 1C 00 00 00
		2C 00 00 00

	The all-important i386 instruction is called LODSL (or in Intel manuals, LODSW).  It does
	two things.  Firstly it reads the memory at %esi into the accumulator (%eax).  Secondly it
	increments %esi by 4 bytes.  So after LODSL, the situation now looks like this:

		08 00 00 00	<- We're still executing this one
		1C 00 00 00	<- %eax now contains this address (0x0000001C)
	%esi -> 2C 00 00 00

	Now we just need to jump to the address in %eax.  This is again just a single x86 instruction
	written JMP *(%eax).  And after doing the jump, the situation looks like:

		08 00 00 00
		1C 00 00 00	<- Now we're executing this subroutine.
	%esi -> 2C 00 00 00

	To make this work, each subroutine is followed by the two instructions 'LODSL; JMP *(%eax)'
	which literally make the jump to the next subroutine.

	And that brings us to our first piece of actual code!  Well, it's a macro.
*/

/* NEXT macro. */
	.macro NEXT
	lodsl
	jmp *(%eax)
	.endm

/*	The macro is called NEXT.  That's a FORTH-ism.  It expands to those two instructions.

	Every FORTH primitive that we write has to be ended by NEXT.  Think of it kind of like
	a return.

	The above describes what is known as direct threaded code.

	To sum up: We compress our function calls down to a list of addresses and use a somewhat
	magical macro to act as a "jump to next function in the list".  We also use one register (%esi)
	to act as a kind of instruction pointer, pointing to the next function in the list.

	I'll just give you a hint of what is to come by saying that a FORTH definition such as:

	: QUADRUPLE DOUBLE DOUBLE ;

	actually compiles (almost, not precisely but we'll see why in a moment) to a list of
	function addresses for DOUBLE, DOUBLE and a special function called EXIT to finish off.

	At this point, REALLY EAGLE-EYED ASSEMBLY EXPERTS are saying "JONES, YOU'VE MADE A MISTAKE!".

	I lied about JMP *(%eax).  

	INDIRECT THREADED CODE ----------------------------------------------------------------------

	It turns out that direct threaded code is interesting but only if you want to just execute
	a list of functions written in assembly language.  So QUADRUPLE would work only if DOUBLE
	was an assembly language function.  In the direct threaded code, QUADRUPLE would look like:

		+------------------+
		| addr of DOUBLE  --------------------> (assembly code to do the double)
		+------------------+                    NEXT
	%esi ->	| addr of DOUBLE   |
		+------------------+

	We can add an extra indirection to allow us to run both words written in assembly language
	(primitives written for speed) and words written in FORTH themselves as lists of addresses.

	The extra indirection is the reason for the brackets in JMP *(%eax).

	Let's have a look at how QUADRUPLE and DOUBLE really look in FORTH:

	        : QUADRUPLE DOUBLE DOUBLE ;

		+------------------+
		| codeword         |		   : DOUBLE DUP + ;
		+------------------+
		| addr of DOUBLE  ---------------> +------------------+
		+------------------+               | codeword         |
		| addr of DOUBLE   |		   +------------------+
		+------------------+	   	   | addr of DUP   --------------> +------------------+
		| addr of EXIT	   |		   +------------------+            | codeword      -------+
		+------------------+	   %esi -> | addr of +     --------+	   +------------------+   |
						   +------------------+	   |	   | assembly to    <-----+
						   | addr of EXIT     |    |       | implement DUP    |
						   +------------------+	   |	   |	..	      |
									   |	   |    ..            |
									   |	   | NEXT             |
									   |	   +------------------+
									   |
									   +-----> +------------------+
										   | codeword      -------+
										   +------------------+   |
										   | assembly to   <------+
										   | implement +      |
										   | 	..            |
										   | 	..            |
										   | NEXT      	      |
										   +------------------+

	This is the part where you may need an extra cup of tea/coffee/favourite caffeinated
	beverage.  What has changed is that I've added an extra pointer to the beginning of
	the definitions.  In FORTH this is sometimes called the "codeword".  The codeword is
	a pointer to the interpreter to run the function.  For primitives written in
	assembly language, the "interpreter" just points to the actual assembly code itself.
	They don't need interpreting, they just run.

	In words written in FORTH (like QUADRUPLE and DOUBLE), the codeword points to an interpreter
	function.

	I'll show you the interpreter function shortly, but let's recall our indirect
	JMP *(%eax) with the "extra" brackets.  Take the case where we're executing DOUBLE
	as shown, and DUP has been called.  Note that %esi is pointing to the address of +

	The assembly code for DUP eventually does a NEXT.  That:

	(1) reads the address of + into %eax		%eax points to the codeword of +
	(2) increments %esi by 4
	(3) jumps to the indirect %eax			jumps to the address in the codeword of +,
							ie. the assembly code to implement +

		+------------------+
		| codeword         |
		+------------------+
		| addr of DOUBLE  ---------------> +------------------+
		+------------------+               | codeword         |
		| addr of DOUBLE   |		   +------------------+
		+------------------+	   	   | addr of DUP   --------------> +------------------+
		| addr of EXIT	   |		   +------------------+            | codeword      -------+
		+------------------+	   	   | addr of +     --------+	   +------------------+   |
						   +------------------+	   |	   | assembly to    <-----+
					   %esi -> | addr of EXIT     |    |       | implement DUP    |
						   +------------------+	   |	   |	..	      |
									   |	   |    ..            |
									   |	   | NEXT             |
									   |	   +------------------+
									   |
									   +-----> +------------------+
										   | codeword      -------+
										   +------------------+   |
									now we're  | assembly to    <-----+
									executing  | implement +      |
									this	   | 	..            |
									function   | 	..            |
										   | NEXT      	      |
										   +------------------+

	So I hope that I've convinced you that NEXT does roughly what you'd expect.  This is
	indirect threaded code.

	I've glossed over four things.  I wonder if you can guess without reading on what they are?

	.
	.
	.

	My list of four things are: (1) What does "EXIT" do?  (2) which is related to (1) is how do
	you call into a function, ie. how does %esi start off pointing at part of QUADRUPLE, but
	then point at part of DOUBLE.  (3) What goes in the codeword for the words which are written
	in FORTH?  (4) How do you compile a function which does anything except call other functions
	ie. a function which contains a number like : DOUBLE 2 * ; ?

	THE INTERPRETER AND RETURN STACK ------------------------------------------------------------

	Going at these in no particular order, let's talk about issues (3) and (2), the interpreter
	and the return stack.

	Words which are defined in FORTH need a codeword which points to a little bit of code to
	give them a "helping hand" in life.  They don't need much, but they do need what is known
	as an "interpreter", although it doesn't really "interpret" in the same way that, say,
	Java bytecode used to be interpreted (ie. slowly).  This interpreter just sets up a few
	machine registers so that the word can then execute at full speed using the indirect
	threaded model above.

	One of the things that needs to happen when QUADRUPLE calls DOUBLE is that we save the old
	%esi ("instruction pointer") and create a new one pointing to the first word in DOUBLE.
	Because we will need to restore the old %esi at the end of DOUBLE (this is, after all, like
	a function call), we will need a stack to store these "return addresses" (old values of %esi).

	As you will have seen in the background documentation, FORTH has two stacks, an ordinary
	stack for parameters, and a return stack which is a bit more mysterious.  But our return
	stack is just the stack I talked about in the previous paragraph, used to save %esi when
	calling from a FORTH word into another FORTH word.

	In this FORTH, we are using the normal stack pointer (%esp) for the parameter stack.
	We will use the i386's "other" stack pointer (%ebp, usually called the "frame pointer")
	for our return stack.

	I've got two macros which just wrap up the details of using %ebp for the return stack.
	You use them as for example "PUSHRSP %eax" (push %eax on the return stack) or "POPRSP %ebx"
	(pop top of return stack into %ebx).
*/

/* Macros to deal with the return stack. */
	.macro PUSHRSP reg
	lea -4(%ebp),%ebp	// push reg on to return stack
	movl \reg,(%ebp)
	.endm

	.macro POPRSP reg
	mov (%ebp),\reg		// pop top of return stack to reg
	lea 4(%ebp),%ebp
	.endm

/*
	And with that we can now talk about the interpreter.

	In FORTH the interpreter function is often called DOCOL (I think it means "DO COLON" because
	all FORTH definitions start with a colon, as in : DOUBLE DUP + ;

	The "interpreter" (it's not really "interpreting") just needs to push the old %esi on the
	stack and set %esi to the first word in the definition.  Remember that we jumped to the
	function using JMP *(%eax)?  Well a consequence of that is that conveniently %eax contains
	the address of this codeword, so just by adding 4 to it we get the address of the first
	data word.  Finally after setting up %esi, it just does NEXT which causes that first word
	to run.
*/

/* DOCOL - the interpreter! */
	.text
	.align 4
DOCOL:
	PUSHRSP %esi		// push %esi on to the return stack
	addl $4,%eax		// %eax points to codeword, so make
	movl %eax,%esi		// %esi point to first data word
	NEXT

/*
	Just to make this absolutely clear, let's see how DOCOL works when jumping from QUADRUPLE
	into DOUBLE:

		QUADRUPLE:
		+------------------+
		| codeword         |
		+------------------+		   DOUBLE:
		| addr of DOUBLE  ---------------> +------------------+
		+------------------+       %eax -> | addr of DOCOL    |
	%esi ->	| addr of DOUBLE   |		   +------------------+
		+------------------+	   	   | addr of DUP      |
		| addr of EXIT	   |		   +------------------+
		+------------------+               | etc.             |

	First, the call to DOUBLE calls DOCOL (the codeword of DOUBLE).  DOCOL does this:  It
	pushes the old %esi on the return stack.  %eax points to the codeword of DOUBLE, so we
	just add 4 on to it to get our new %esi:

		QUADRUPLE:
		+------------------+
		| codeword         |
		+------------------+		   DOUBLE:
		| addr of DOUBLE  ---------------> +------------------+
top of return	+------------------+       %eax -> | addr of DOCOL    |
stack points ->	| addr of DOUBLE   |	   + 4 =   +------------------+
		+------------------+	   %esi -> | addr of DUP      |
		| addr of EXIT	   |		   +------------------+
		+------------------+               | etc.             |

	Then we do NEXT, and because of the magic of threaded code that increments %esi again
	and calls DUP.

	Well, it seems to work.

	One minor point here.  Because DOCOL is the first bit of assembly actually to be defined
	in this file (the others were just macros), and because I usually compile this code with the
	text segment starting at address 0, DOCOL has address 0.  So if you are disassembling the
	code and see a word with a codeword of 0, you will immediately know that the word is
	written in FORTH (it's not an assembler primitive) and so uses DOCOL as the interpreter.

	STARTING UP ----------------------------------------------------------------------

	Now let's get down to nuts and bolts.  When we start the program we need to set up
	a few things like the return stack.  But as soon as we can, we want to jump into FORTH
	code (albeit much of the "early" FORTH code will still need to be written as
	assembly language primitives).

	This is what the set up code does.  Does a tiny bit of house-keeping, sets up the
	separate return stack (NB: Linux gives us the ordinary parameter stack already), then
	immediately jumps to a FORTH word called QUIT.  Despite its name, QUIT doesn't quit
	anything.  It resets some internal state and starts reading and interpreting commands.
	(The reason it is called QUIT is because you can call QUIT from your own FORTH code
	to "quit" your program and go back to interpreting).
*/

/* Assembler entry point. */
	.text
	.globl _start
_start:
	cld
	mov %esp,var_S0		// Save the initial data stack pointer in FORTH variable S0.
	mov $return_stack_top,%ebp // Initialise the return stack.
	call set_up_data_segment

	mov $cold_start,%esi	// Initialise interpreter.
	NEXT			// Run interpreter!

	.section .rodata
cold_start:			// High-level code without a codeword.
	.int QUIT

/*
	BUILT-IN WORDS ----------------------------------------------------------------------

	Remember our dictionary entries (headers)?  Let's bring those together with the codeword
	and data words to see how : DOUBLE DUP + ; really looks in memory.

	  pointer to previous word
	   ^
	   |
	+--|------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+--|---------+------------+------------+
           ^       len                         pad  codeword      |
	   |							  V
	  LINK in next word				points to codeword of DUP
	
	Initially we can't just write ": DOUBLE DUP + ;" (ie. that literal string) here because we
	don't yet have anything to read the string, break it up at spaces, parse each word, etc. etc.
	So instead we will have to define built-in words using the GNU assembler data constructors
	(like .int, .byte, .string, .ascii and so on -- look them up in the gas info page if you are
	unsure of them).

	The long way would be:

	.int <link to previous word>
	.byte 6			// len
	.ascii "DOUBLE"		// string
	.byte 0			// padding
DOUBLE: .int DOCOL		// codeword
	.int DUP		// pointer to codeword of DUP
	.int PLUS		// pointer to codeword of +
	.int EXIT		// pointer to codeword of EXIT

	That's going to get quite tedious rather quickly, so here I define an assembler macro
	so that I can just write:

	defword "DOUBLE",6,,DOUBLE
	.int DUP,PLUS,EXIT

	and I'll get exactly the same effect.

	Don't worry too much about the exact implementation details of this macro - it's complicated!
*/

/* Flags - these are discussed later. */
	.set F_IMMED,0x80
	.set F_HIDDEN,0x20
	.set F_LENMASK,0x1f	// length mask

	// Store the chain of links.
	.set link,0

	.macro defword name, namelen, flags=0, label
	.section .rodata
	.align 4
	.globl name_\label
name_\label :
	.int link		// link
	.set link,name_\label
	.byte \flags+\namelen	// flags + length byte
	.ascii "\name"		// the name
	.align 4		// padding to next 4 byte boundary
	.globl \label
\label :
	.int DOCOL		// codeword - the interpreter
	// list of word pointers follow
	.endm

/*
	Similarly I want a way to write words written in assembly language.  There will quite a few
	of these to start with because, well, everything has to start in assembly before there's
	enough "infrastructure" to be able to start writing FORTH words, but also I want to define
	some common FORTH words in assembly language for speed, even though I could write them in FORTH.

	This is what DUP looks like in memory:

	  pointer to previous word
	   ^
	   |
	+--|------+---+---+---+---+------------+
	| LINK    | 3 | D | U | P | code_DUP ---------------------> points to the assembly
	+---------+---+---+---+---+------------+		    code used to write DUP,
           ^       len              codeword			    which ends with NEXT.
	   |
	  LINK in next word

	Again, for brevity in writing the header I'm going to write an assembler macro called defcode.
	As with defword above, don't worry about the complicated details of the macro.
*/

	.macro defcode name, namelen, flags=0, label
	.section .rodata
	.align 4
	.globl name_\label
name_\label :
	.int link		// link
	.set link,name_\label
	.byte \flags+\namelen	// flags + length byte
	.ascii "\name"		// the name
	.align 4		// padding to next 4 byte boundary
	.globl \label
\label :
	.int code_\label	// codeword
	.text
	//.align 4
	.globl code_\label
code_\label :			// assembler code follows
	.endm

/*
	Now some easy FORTH primitives.  These are written in assembly for speed.  If you understand
	i386 assembly language then it is worth reading these.  However if you don't understand assembly
	you can skip the details.
*/

	defcode "DROP",4,,DROP
	pop %eax		// drop top of stack
	NEXT

	defcode "SWAP",4,,SWAP
	pop %eax		// swap top two elements on stack
	pop %ebx
	push %eax
	push %ebx
	NEXT

	defcode "DUP",3,,DUP
	mov (%esp),%eax		// duplicate top of stack
	push %eax
	NEXT

	defcode "OVER",4,,OVER
	mov 4(%esp),%eax	// get the second element of stack
	push %eax		// and push it on top
	NEXT

	defcode "ROT",3,,ROT
	pop %eax
	pop %ebx
	pop %ecx
	push %ebx
	push %eax
	push %ecx
	NEXT

	defcode "-ROT",4,,NROT
	pop %eax
	pop %ebx
	pop %ecx
	push %eax
	push %ecx
	push %ebx
	NEXT

	defcode "2DROP",5,,TWODROP // drop top two elements of stack
	pop %eax
	pop %eax
	NEXT

	defcode "2DUP",4,,TWODUP // duplicate top two elements of stack
	mov (%esp),%eax
	mov 4(%esp),%ebx
	push %ebx
	push %eax
	NEXT

	defcode "2SWAP",5,,TWOSWAP // swap top two pairs of elements of stack
	pop %eax
	pop %ebx
	pop %ecx
	pop %edx
	push %ebx
	push %eax
	push %edx
	push %ecx
	NEXT

	defcode "?DUP",4,,QDUP	// duplicate top of stack if non-zero
	movl (%esp),%eax
	test %eax,%eax
	jz 1f
	push %eax
1:	NEXT

	defcode "1+",2,,INCR
	incl (%esp)		// increment top of stack
	NEXT

	defcode "1-",2,,DECR
	decl (%esp)		// decrement top of stack
	NEXT

	defcode "4+",2,,INCR4
	addl $4,(%esp)		// add 4 to top of stack
	NEXT

	defcode "4-",2,,DECR4
	subl $4,(%esp)		// subtract 4 from top of stack
	NEXT

	defcode "+",1,,ADD
	pop %eax		// get top of stack
	addl %eax,(%esp)	// and add it to next word on stack
	NEXT

	defcode "-",1,,SUB
	pop %eax		// get top of stack
	subl %eax,(%esp)	// and subtract it from next word on stack
	NEXT

	defcode "*",1,,MUL
	pop %eax
	pop %ebx
	imull %ebx,%eax
	push %eax		// ignore overflow
	NEXT

/*
	In this FORTH, only /MOD and U/MOD is primitive.  Later we will define the /, MOD and other words in
	terms of the primitives /MOD and U/MOD.  The design of the i386 assembly instructions idiv and div which
	leave both quotient and remainder makes this the obvious choice.
*/

	defcode "/MOD",4,,DIVMOD
	pop %ebx
	pop %eax
	cdq
	idivl %ebx
	push %edx		// push remainder
	push %eax		// push quotient
	NEXT

	defcode "U/MOD",5,,UDIVMOD
	xor %edx, %edx
	pop %ebx
	pop %eax
	divl %ebx
	push %edx	// push remainder
	push %eax	// push quotient
	NEXT

/*
	Lots of comparison operations like =, <, >, etc..

	ANS FORTH says that the comparison words should return all (binary) 1's for
	TRUE and all 0's for FALSE.  This is a bit of a strange convention for C
	programmers ...
	Anyway, -1 meaning TRUE and 0 meaning FALSE.
*/

	defcode "=",1,,EQU	// top two words are equal?
	pop %eax
	pop %ebx
	cmp %ebx,%eax
	sete %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "<>",2,,NEQU	// top two words are not equal?
	pop %eax
	pop %ebx
	cmp %ebx,%eax
	setne %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "<",1,,LT
	pop %eax
	pop %ebx
	cmp %eax,%ebx
	setl %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode ">",1,,GT
	pop %eax
	pop %ebx
	cmp %eax,%ebx
	setg %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "<=",2,,LE
	pop %eax
	pop %ebx
	cmp %eax,%ebx
	setle %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode ">=",2,,GE
	pop %eax
	pop %ebx
	cmp %eax,%ebx
	setge %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0=",2,,ZEQU	// top of stack equals 0?
	pop %eax
	test %eax,%eax
	setz %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0<>",3,,ZNEQU	// top of stack not 0?
	pop %eax
	test %eax,%eax
	setnz %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0<",2,,ZLT	// comparisons with 0
	pop %eax
	test %eax,%eax
	setl %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0>",2,,ZGT
	pop %eax
	test %eax,%eax
	setg %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0<=",3,,ZLE
	pop %eax
	test %eax,%eax
	setle %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "0>=",3,,ZGE
	pop %eax
	test %eax,%eax
	setge %al
	movzbl %al,%eax
	neg %eax
	pushl %eax
	NEXT

	defcode "AND",3,,AND	// bitwise AND
	pop %eax
	andl %eax,(%esp)
	NEXT

	defcode "OR",2,,OR	// bitwise OR
	pop %eax
	orl %eax,(%esp)
	NEXT

	defcode "XOR",3,,XOR	// bitwise XOR
	pop %eax
	xorl %eax,(%esp)
	NEXT

	defcode "INVERT",6,,INVERT // this is the FORTH bitwise "NOT" function (cf. NEGATE and NOT)
	notl (%esp)
	NEXT

/*
	RETURNING FROM FORTH WORDS ----------------------------------------------------------------------

	Time to talk about what happens when we EXIT a function.  In this diagram QUADRUPLE has called
	DOUBLE, and DOUBLE is about to exit (look at where %esi is pointing):

		QUADRUPLE
		+------------------+
		| codeword         |
		+------------------+		   DOUBLE
		| addr of DOUBLE  ---------------> +------------------+
		+------------------+               | codeword         |
		| addr of DOUBLE   |		   +------------------+
		+------------------+	   	   | addr of DUP      |
		| addr of EXIT	   |		   +------------------+
		+------------------+	   	   | addr of +        |
						   +------------------+
					   %esi -> | addr of EXIT     |
						   +------------------+

	What happens when the + function does NEXT?  Well, the following code is executed.
*/

	defcode "EXIT",4,,EXIT
	POPRSP %esi		// pop return stack into %esi
	NEXT

/*
	EXIT gets the old %esi which we saved from before on the return stack, and puts it in %esi.
	So after this (but just before NEXT) we get:

		QUADRUPLE
		+------------------+
		| codeword         |
		+------------------+		   DOUBLE
		| addr of DOUBLE  ---------------> +------------------+
		+------------------+               | codeword         |
	%esi ->	| addr of DOUBLE   |		   +------------------+
		+------------------+	   	   | addr of DUP      |
		| addr of EXIT	   |		   +------------------+
		+------------------+	   	   | addr of +        |
						   +------------------+
						   | addr of EXIT     |
						   +------------------+

	And NEXT just completes the job by, well, in this case just by calling DOUBLE again :-)

	LITERALS ----------------------------------------------------------------------

	The final point I "glossed over" before was how to deal with functions that do anything
	apart from calling other functions.  For example, suppose that DOUBLE was defined like this:

	: DOUBLE 2 * ;

	It does the same thing, but how do we compile it since it contains the literal 2?  One way
	would be to have a function called "2" (which you'd have to write in assembler), but you'd need
	a function for every single literal that you wanted to use.

	FORTH solves this by compiling the function using a special word called LIT:

	+---------------------------+-------+-------+-------+-------+-------+
	| (usual header of DOUBLE)  | DOCOL | LIT   | 2     | *     | EXIT  |
	+---------------------------+-------+-------+-------+-------+-------+

	LIT is executed in the normal way, but what it does next is definitely not normal.  It
	looks at %esi (which now points to the number 2), grabs it, pushes it on the stack, then
	manipulates %esi in order to skip the number as if it had never been there.

	What's neat is that the whole grab/manipulate can be done using a single byte single
	i386 instruction, our old friend LODSL.  Rather than me drawing more ASCII-art diagrams,
	see if you can find out how LIT works:
*/

	defcode "LIT",3,,LIT
	// %esi points to the next command, but in this case it points to the next
	// literal 32 bit integer.  Get that literal into %eax and increment %esi.
	// On x86, it's a convenient single byte instruction!  (cf. NEXT macro)
	lodsl
	push %eax		// push the literal number on to stack
	NEXT

/*
	MEMORY ----------------------------------------------------------------------

	As important point about FORTH is that it gives you direct access to the lowest levels
	of the machine.  Manipulating memory directly is done frequently in FORTH, and these are
	the primitive words for doing it.
*/

	defcode "!",1,,STORE
	pop %ebx		// address to store at
	pop %eax		// data to store there
	mov %eax,(%ebx)		// store it
	NEXT

	defcode "@",1,,FETCH
	pop %ebx		// address to fetch
	mov (%ebx),%eax		// fetch it
	push %eax		// push value onto stack
	NEXT

	defcode "+!",2,,ADDSTORE
	pop %ebx		// address
	pop %eax		// the amount to add
	addl %eax,(%ebx)	// add it
	NEXT

	defcode "-!",2,,SUBSTORE
	pop %ebx		// address
	pop %eax		// the amount to subtract
	subl %eax,(%ebx)	// add it
	NEXT

/*
	! and @ (STORE and FETCH) store 32-bit words.  It's also useful to be able to read and write bytes
	so we also define standard words C@ and C!.

	Byte-oriented operations only work on architectures which permit them (i386 is one of those).
 */

	defcode "C!",2,,STOREBYTE
	pop %ebx		// address to store at
	pop %eax		// data to store there
	movb %al,(%ebx)		// store it
	NEXT

	defcode "C@",2,,FETCHBYTE
	pop %ebx		// address to fetch
	xor %eax,%eax
	movb (%ebx),%al		// fetch it
	push %eax		// push value onto stack
	NEXT

/* C@C! is a useful byte copy primitive. */
	defcode "C@C!",4,,CCOPY
	movl 4(%esp),%ebx	// source address
	movb (%ebx),%al		// get source character
	pop %edi		// destination address
	stosb			// copy to destination
	push %edi		// increment destination address
	incl 4(%esp)		// increment source address
	NEXT

/* and CMOVE is a block copy operation. */
	defcode "CMOVE",5,,CMOVE
	mov %esi,%edx		// preserve %esi
	pop %ecx		// length
	pop %edi		// destination address
	pop %esi		// source address
	rep movsb		// copy source to destination
	mov %edx,%esi		// restore %esi
	NEXT

/*
	BUILT-IN VARIABLES ----------------------------------------------------------------------

	These are some built-in variables and related standard FORTH words.  Of these, the only one that we
	have discussed so far was LATEST, which points to the last (most recently defined) word in the
	FORTH dictionary.  LATEST is also a FORTH word which pushes the address of LATEST (the variable)
	on to the stack, so you can read or write it using @ and ! operators.  For example, to print
	the current value of LATEST (and this can apply to any FORTH variable) you would do:

	LATEST @ . CR

	To make defining variables shorter, I'm using a macro called defvar, similar to defword and
	defcode above.  (In fact the defvar macro uses defcode to do the dictionary header).
*/

	.macro defvar name, namelen, flags=0, label, initial=0
	defcode \name,\namelen,\flags,\label
	push $var_\name
	NEXT
	.data
	.align 4
var_\name :
	.int \initial
	.endm

/*
	The built-in variables are:

	STATE		Is the interpreter executing code (0) or compiling a word (non-zero)?
	LATEST		Points to the latest (most recently defined) word in the dictionary.
	DP		Points to the next free byte of memory.  When compiling, compiled words go here.
	S0		Stores the address of the top of the parameter stack.
	BASE		The current base for printing and reading numbers.

*/
	defvar "STATE",5,,STATE
	defvar "DP",2,,DP
	defvar "LATEST",6,,LATEST,name_SYSCALL0 // SYSCALL0 must be last in built-in dictionary
	defvar "S0",2,,SZ
	defvar "BASE",4,,BASE,10

/*
	BUILT-IN CONSTANTS ----------------------------------------------------------------------

	It's also useful to expose a few constants to FORTH.  When the word is executed it pushes a
	constant value on the stack.

	The built-in constants are:

	VERSION		Is the current version of this FORTH.
	R0		The address of the top of the return stack.
	DOCOL		Pointer to DOCOL.
	F_IMMED		The IMMEDIATE flag's actual value.
	F_HIDDEN	The HIDDEN flag's actual value.
	F_LENMASK	The length mask in the flags/len byte.

	SYS_*		and the numeric codes of various Linux syscalls (from <asm/unistd.h>)
*/

//#include <asm-i386/unistd.h>	// you might need this instead
#include <asm/unistd.h>

	.macro defconst name, namelen, flags=0, label, value
	defcode \name,\namelen,\flags,\label
	push $\value
	NEXT
	.endm

	defconst "VERSION",7,,VERSION,JONES_VERSION
	defconst "R0",2,,RZ,return_stack_top
	defconst "DOCOL",5,,__DOCOL,DOCOL
	defconst "F_IMMED",7,,__F_IMMED,F_IMMED
	defconst "F_HIDDEN",8,,__F_HIDDEN,F_HIDDEN
	defconst "F_LENMASK",9,,__F_LENMASK,F_LENMASK

	defconst "SYS_EXIT",8,,SYS_EXIT,__NR_exit
	defconst "SYS_OPEN",8,,SYS_OPEN,__NR_open
	defconst "SYS_CLOSE",9,,SYS_CLOSE,__NR_close
	defconst "SYS_READ",8,,SYS_READ,__NR_read
	defconst "SYS_WRITE",9,,SYS_WRITE,__NR_write
	defconst "SYS_CREAT",9,,SYS_CREAT,__NR_creat
	defconst "SYS_BRK",7,,SYS_BRK,__NR_brk

	defconst "O_RDONLY",8,,__O_RDONLY,0
	defconst "O_WRONLY",8,,__O_WRONLY,1
	defconst "O_RDWR",6,,__O_RDWR,2
	defconst "O_CREAT",7,,__O_CREAT,0100
	defconst "O_EXCL",6,,__O_EXCL,0200
	defconst "O_TRUNC",7,,__O_TRUNC,01000
	defconst "O_APPEND",8,,__O_APPEND,02000
	defconst "O_NONBLOCK",10,,__O_NONBLOCK,04000

/*
	RETURN STACK ----------------------------------------------------------------------

	These words allow you to access the return stack.  Recall that the register %ebp always points to
	the top of the return stack.
*/

	defcode ">R",2,,TOR
	pop %eax		// pop parameter stack into %eax
	PUSHRSP %eax		// push it on to the return stack
	NEXT

	defcode "R>",2,,FROMR
	POPRSP %eax		// pop return stack on to %eax
	push %eax		// and push on to parameter stack
	NEXT

	defcode "RSP@",4,,RSPFETCH
	push %ebp
	NEXT

	defcode "RSP!",4,,RSPSTORE
	pop %ebp
	NEXT

	defcode "RDROP",5,,RDROP
	addl $4,%ebp		// pop return stack and throw away
	NEXT

/*
	PARAMETER (DATA) STACK ----------------------------------------------------------------------

	These functions allow you to manipulate the parameter stack.  Recall that Linux sets up the parameter
	stack for us, and it is accessed through %esp.
*/

	defcode "DSP@",4,,DSPFETCH
	mov %esp,%eax
	push %eax
	NEXT

	defcode "DSP!",4,,DSPSTORE
	pop %esp
	NEXT

/*
	INPUT AND OUTPUT ----------------------------------------------------------------------

	These are our first really meaty/complicated FORTH primitives.  I have chosen to write them in
	assembler, but surprisingly in "real" FORTH implementations these are often written in terms
	of more fundamental FORTH primitives.  I chose to avoid that because I think that just obscures
	the implementation.  After all, you may not understand assembler but you can just think of it
	as an opaque block of code that does what it says.

	Let's discuss input first.

	The FORTH word KEY reads the next byte from stdin (and pushes it on the parameter stack).
	So if KEY is called and someone hits the space key, then the number 32 (ASCII code of space)
	is pushed on the stack.

	In FORTH there is no distinction between reading code and reading input.  We might be reading
	and compiling code, we might be reading words to execute, we might be asking for the user
	to type their name -- ultimately it all comes in through KEY.

	The implementation of KEY uses an input buffer of a certain size (defined at the end of this
	file).  It calls the Linux read(2) system call to fill this buffer and tracks its position
	in the buffer using a couple of variables, and if it runs out of input buffer then it refills
	it automatically.  The other thing that KEY does is if it detects that stdin has closed, it
	exits the program, which is why when you hit ^D the FORTH system cleanly exits.

     buffer			      bufftop
	|				 |
	V				 V
	+-------------------------------+--------------------------------------+
	| INPUT READ FROM STDIN ....... | unused part of the buffer            |
	+-------------------------------+--------------------------------------+
	                  ^
			  |
		       currkey (next character to read)

	<---------------------- BUFFER_SIZE (4096 bytes) ---------------------->
*/

	defcode "KEY",3,,KEY
	call _KEY
	push %eax		// push return value on stack
	NEXT
_KEY:
	mov (currkey),%ebx
	cmp (bufftop),%ebx
	jge 1f			// exhausted the input buffer?
	xor %eax,%eax
	mov (%ebx),%al		// get next key from input buffer
	inc %ebx
	mov %ebx,(currkey)	// increment currkey
	ret

1:	// Out of input; use read(2) to fetch more input from stdin.
	xor %ebx,%ebx		// 1st param: stdin
	mov $buffer,%ecx	// 2nd param: buffer
	mov %ecx,currkey
	mov $BUFFER_SIZE,%edx	// 3rd param: max length
	mov $__NR_read,%eax	// syscall: read
	int $0x80
	test %eax,%eax		// If %eax <= 0, then exit.
	jbe 2f
	addl %eax,%ecx		// buffer+%eax = bufftop
	mov %ecx,bufftop
	jmp _KEY

2:	// Error or end of input: exit the program.
	xor %ebx,%ebx
	mov $__NR_exit,%eax	// syscall: exit
	int $0x80

	.data
	.align 4
currkey:
	.int buffer		// Current place in input buffer (next character to read).
bufftop:
	.int buffer		// Last valid data in input buffer + 1.

/*
	By contrast, output is much simpler.  The FORTH word EMIT writes out a single byte to stdout.
	This implementation just uses the write system call.  No attempt is made to buffer output, but
	it would be a good exercise to add it.
*/

	defcode "EMIT",4,,EMIT
	pop %eax
	call _EMIT
	NEXT
_EMIT:
	mov $1,%ebx		// 1st param: stdout

	// write needs the address of the byte to write
	mov %al,emit_scratch
	mov $emit_scratch,%ecx	// 2nd param: address

	mov $1,%edx		// 3rd param: nbytes = 1

	mov $__NR_write,%eax	// write syscall
	int $0x80
	ret

	.data			// NB: easier to fit in the .data section
emit_scratch:
	.space 1		// scratch used by EMIT

/*
	Back to input, WORD is a FORTH word which reads the next full word of input.

	What it does in detail is that it first skips any blanks (spaces, tabs, newlines and so on).
	Then it calls KEY to read characters into an internal buffer until it hits a blank.  Then it
	calculates the length of the word it read and returns the address and the length as
	two words on the stack (with the length at the top of stack).

	Notice that WORD has a single internal buffer which it overwrites each time (rather like
	a static C string).  Also notice that WORD's internal buffer is just 32 bytes long and
	there is NO checking for overflow.  31 bytes happens to be the maximum length of a
	FORTH word that we support, and that is what WORD is used for: to read FORTH words when
	we are compiling and executing code.  The returned strings are not NUL-terminated.

	Start address+length is the normal way to represent strings in FORTH (not ending in an
	ASCII NUL character as in C), and so FORTH strings can contain any character including NULs
	and can be any length.

	WORD is not suitable for just reading strings (eg. user input) because of all the above
	peculiarities and limitations.

	Note that when executing, you'll see:
	WORD FOO
	which puts "FOO" and length 3 on the stack, but when compiling:
	: BAR WORD FOO ;
	is an error (or at least it doesn't do what you might expect).  Later we'll talk about compiling
	and immediate mode, and you'll understand why.
*/

	defcode "WORD",4,,WORD
	call _WORD
	push %edi		// push base address
	push %ecx		// push length
	NEXT

_WORD:
	/* Search for first non-blank character.  Also skip \ comments. */
1:
	call _KEY		// get next key, returned in %eax
	cmpb $'\\',%al		// start of a comment?
	je 3f			// if so, skip the comment
	cmpb $' ',%al
	jbe 1b			// if so, keep looking

	/* Search for the end of the word, storing chars as we go. */
	mov $word_buffer,%edi	// pointer to return buffer
2:
	stosb			// add character to return buffer
	call _KEY		// get next key, returned in %al
	cmpb $' ',%al		// is blank?
	ja 2b			// if not, keep looping

	/* Return the word (well, the static buffer) and length. */
	sub $word_buffer,%edi
	mov %edi,%ecx		// return length of the word
	mov $word_buffer,%edi	// return address of the word
	ret

	/* Code to skip \ comments to end of the current line. */
3:
	call _KEY
	cmpb $'\n',%al		// end of line yet?
	jne 3b
	jmp 1b

	.data			// NB: easier to fit in the .data section
	// A static buffer where WORD returns.  Subsequent calls
	// overwrite this buffer.  Maximum word length is 32 chars.
word_buffer:
	.space 32

/*
	As well as reading in words we'll need to read in numbers and for that we are using a function
	called NUMBER.  This parses a numeric string such as one returned by WORD and pushes the
	number on the parameter stack.

	The function uses the variable BASE as the base (radix) for conversion, so for example if
	BASE is 2 then we expect a binary number.  Normally BASE is 10.

	If the word starts with a '-' character then the returned value is negative.

	If the string can't be parsed as a number (or contains characters outside the current BASE)
	then we need to return an error indication.  So NUMBER actually returns two items on the stack.
	At the top of stack we return the number of unconverted characters (ie. if 0 then all characters
	were converted, so there is no error).  Second from top of stack is the parsed number or a
	partial value if there was an error.
*/
	defcode "NUMBER",6,,NUMBER
	pop %ecx		// length of string
	pop %edi		// start address of string
	call _NUMBER
	push %eax		// parsed number
	push %ecx		// number of unparsed characters (0 = no error)
	NEXT

_NUMBER:
	xor %eax,%eax
	xor %ebx,%ebx

	test %ecx,%ecx		// trying to parse a zero-length string is an error, but will return 0.
	jz 5f

	movl var_BASE,%edx	// get BASE (in %dl)

	// Check if first character is '-'.
	movb (%edi),%bl		// %bl = first character in string
	inc %edi
	push %eax		// push 0 on stack
	cmpb $'-',%bl		// negative number?
	jnz 2f
	pop %eax
	push %ebx		// push <> 0 on stack, indicating negative
	dec %ecx
	jnz 1f
	pop %ebx		// error: string is only '-'.
	movl $1,%ecx
	ret

	// Loop reading digits.
1:	imull %edx,%eax		// %eax *= BASE
	movb (%edi),%bl		// %bl = next character in string
	inc %edi

	// Convert 0-9, A-Z to a number 0-35.
2:	subb $'0',%bl		// < '0'?
	jb 4f
	cmp $10,%bl		// <= '9'?
	jb 3f
	subb $17,%bl		// < 'A'? (17 is 'A'-'0')
	jb 4f
	addb $10,%bl

3:	cmp %dl,%bl		// >= BASE?
	jge 4f

	// OK, so add it to %eax and loop.
	add %ebx,%eax
	dec %ecx
	jnz 1b

	// Negate the result if first character was '-' (saved on the stack).
4:	pop %ebx
	test %ebx,%ebx
	jz 5f
	neg %eax

5:	ret

/*
	DICTIONARY LOOK UPS ----------------------------------------------------------------------

	We're building up to our prelude on how FORTH code is compiled, but first we need yet more infrastructure.

	The FORTH word (FIND) takes a string (a word as parsed by WORD -- see above) and looks it up in the
	dictionary.  What it actually returns is the address of the dictionary header, if it finds it, or 0 if it
	didn't.

	This word is call (FIND) but not simply FIND because FIND is a standard ANS Forth word which does a little
	more than (FIND).

	So if DOUBLE is defined in the dictionary, then WORD DOUBLE (FIND) returns the following pointer:

    pointer to this
	|
	|
	V
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+

	See also >CFA and >DFA.

	(FIND) doesn't find dictionary entries which are flagged as HIDDEN.  See below for why.
*/

	defcode "(FIND)",6,,PAREN_FIND
	pop %ecx		// %ecx = length
	pop %edi		// %edi = address
	call _FIND
	push %eax		// %eax = address of dictionary entry (or NULL)
	NEXT

_FIND:
	push %esi		// Save %esi so we can use it in string comparison.

	// Now we start searching backwards through the dictionary for this word.
	mov var_LATEST,%edx	// LATEST points to name header of the latest word in the dictionary
1:	test %edx,%edx		// NULL pointer?  (end of the linked list)
	je 4f

	// Compare the length expected and the length of the word.
	// Note that if the F_HIDDEN flag is set on the word, then by a bit of trickery
	// this won't pick the word (the length will appear to be wrong).
	xor %eax,%eax
	movb 4(%edx),%al	// %al = flags+length field
	andb $(F_HIDDEN|F_LENMASK),%al // %al = name length
	cmpb %cl,%al		// Length is the same?
	jne 2f

	// Compare the strings in detail.
	push %ecx		// Save the length
	push %edi		// Save the address (repe cmpsb will move this pointer)
	lea 5(%edx),%esi	// Dictionary string we are checking against.
	repe cmpsb		// Compare the strings.
	pop %edi
	pop %ecx
	jne 2f			// Not the same.

	// The strings are the same - return the header pointer in %eax
	pop %esi
	mov %edx,%eax
	ret

2:	mov (%edx),%edx		// Move back through the link field to the previous word
	jmp 1b			// .. and loop.

4:	// Not found.
	pop %esi
	xor %eax,%eax		// Return zero to indicate not found.
	ret

/*
	(FIND) returns the dictionary pointer, but when compiling we need the codeword pointer (recall
	that FORTH definitions are compiled into lists of codeword pointers).  The standard FORTH
	word >CFA turns a dictionary pointer into a codeword pointer.

	The example below shows the result of:

		WORD DOUBLE (FIND) >CFA

	(FIND) returns a pointer to this
	|				>CFA converts it to a pointer to this
	|					   |
	V					   V
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
						   codeword

	Notes:

	Because names vary in length, this isn't just a simple increment.

	In this FORTH you cannot easily turn a codeword pointer back into a dictionary entry pointer, but
	that is not true in most FORTH implementations where they store a back pointer in the definition
	(with an obvious memory/complexity cost).  The reason they do this is that it is useful to be
	able to go backwards (codeword -> dictionary entry) in order to decompile FORTH definitions
	quickly.

	What does CFA stand for?  My best guess is "Code Field Address".
*/

	defcode ">CFA",4,,TCFA
	pop %edi
	call _TCFA
	push %edi
	NEXT
_TCFA:
	xor %eax,%eax
	add $4,%edi		// Skip link pointer.
	movb (%edi),%al		// Load flags+len into %al.
	inc %edi		// Skip flags+len byte.
	andb $F_LENMASK,%al	// Just the length, not the flags.
	add %eax,%edi		// Skip the name.
	addl $3,%edi		// The codeword is 4-byte aligned.
	andl $~3,%edi
	ret

/*
	Related to >CFA is >DFA which takes a dictionary entry address as returned by (FIND) and
	returns a pointer to the first data field.

	(FIND) returns a pointer to this
	|				>CFA converts it to a pointer to this
	|					   |
	|					   |	>DFA converts it to a pointer to this
	|					   |		 |
	V					   V		 V
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
						   codeword

	(Note to those following the source of FIG-FORTH / ciforth: My >DFA definition is
	different from theirs, because they have an extra indirection).

	You can see that >DFA is easily defined in FORTH just by adding 4 to the result of >CFA.
*/

	defword ">DFA",4,,TDFA
	.int TCFA		// >CFA		(get code field address)
	.int INCR4		// 4+		(add 4 to it to get to next word)
	.int EXIT		// EXIT		(return from FORTH word)

/*
	COMPILING ----------------------------------------------------------------------

	Now we'll talk about how FORTH compiles words.  Recall that a word definition looks like this:

		: DOUBLE DUP + ;

	and we have to turn this into:

	  pointer to previous word
	   ^
	   |
	+--|------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+--|---------+------------+------------+
           ^       len                         pad  codeword      |
	   |							  V
	  LATEST points here				points to codeword of DUP

	There are several problems to solve.  Where to put the new word?  How do we read words?  How
	do we define the words : (COLON) and ; (SEMICOLON)?

	FORTH solves this rather elegantly and as you might expect in a very low-level way which
	allows you to change how the compiler works on your own code.

	FORTH has an INTERPRET function (a true interpreter this time, not DOCOL) which runs in a
	loop, reading words (using WORD), looking them up (using (FIND)), turning them into codeword
	pointers (using >CFA) and deciding what to do with them.

	What it does depends on the mode of the interpreter (in variable STATE).

	When STATE is zero, the interpreter just runs each word as it looks them up.  This is known as
	immediate mode.

	The interesting stuff happens when STATE is non-zero -- compiling mode.  In this mode the
	interpreter appends the codeword pointer to user memory (the DP variable points to the next
	free byte of user memory -- see DATA SEGMENT section below).

	So you may be able to see how we could define : (COLON).  The general plan is:

	(1) Use WORD to read the name of the function being defined.

	(2) Construct the dictionary entry -- just the header part -- in user memory:

    pointer to previous word (from LATEST)			+-- Afterwards, DP points here, where
	   ^							|   the interpreter will start appending
	   |							V   codewords.
	+--|------+---+---+---+---+---+---+---+---+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      |
	+---------+---+---+---+---+---+---+---+---+------------+
                   len                         pad  codeword

	(3) Set LATEST to point to the newly defined word, ...

	(4) .. and most importantly leave DP pointing just after the new codeword.  This is where
	    the interpreter will append codewords.

	(5) Set STATE to 1.  This goes into compile mode so the interpreter starts appending codewords to
	    our partially-formed header.

	After : has run, our input is here:

	: DOUBLE DUP + ;
	         ^
		 |
		Next byte returned by KEY will be the 'D' character of DUP

	so the interpreter (now it's in compile mode, so I guess it's really the compiler) reads "DUP",
	looks it up in the dictionary, gets its codeword pointer, and appends it:

									     +-- DP updated to point here.
									     |
									     V
	+---------+---+---+---+---+---+---+---+---+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        |
	+---------+---+---+---+---+---+---+---+---+------------+------------+
                   len                         pad  codeword

	Next we read +, get the codeword pointer, and append it:

											  +-- DP updated to point here.
											  |
											  V
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          |
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+
                   len                         pad  codeword

	The issue is what happens next.  Obviously what we _don't_ want to happen is that we
	read ";" and compile it and go on compiling everything afterwards.

	At this point, FORTH uses a trick.  Remember the length byte in the dictionary definition
	isn't just a plain length byte, but can also contain flags.  One flag is called the
	IMMEDIATE flag (F_IMMED in this code).  If a word in the dictionary is flagged as
	IMMEDIATE then the interpreter runs it immediately _even if it's in compile mode_.

	This is how the word ; (SEMICOLON) works -- as a word flagged in the dictionary as IMMEDIATE.

	And all it does is append the codeword for EXIT on to the current definition and switch
	back to immediate mode (set STATE back to 0).  Shortly we'll see the actual definition
	of ; and we'll see that it's really a very simple definition, declared IMMEDIATE.

	After the interpreter reads ; and executes it 'immediately', we get this:

	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      | DUP        | +          | EXIT       |
	+---------+---+---+---+---+---+---+---+---+------------+------------+------------+------------+
                   len                         pad  codeword					       ^
												       |
												      DP
	STATE is set to 0.

	And that's it, job done, our new definition is compiled, and we're back in immediate mode
	just reading and executing words, perhaps including a call to test our new word DOUBLE.

	The only last wrinkle in this is that while our word was being compiled, it was in a
	half-finished state.  We certainly wouldn't want DOUBLE to be called somehow during
	this time.  There are several ways to stop this from happening, but in FORTH what we
	do is flag the word with the HIDDEN flag (F_HIDDEN in this code) just while it is
	being compiled.  This prevents (FIND) from finding it, and thus in theory stops any
	chance of it being called.

	The above explains how compiling, : (COLON) and ; (SEMICOLON) works and in a moment I'm
	going to define them.  The : (COLON) function can be made a little bit more general by writing
	it in two parts.  The first part, called HEADER, (HEADER_COMMA), makes just the header:

						   +-- Afterwards, DP points here.
						   |
						   V
	+---------+---+---+---+---+---+---+---+---+
	| LINK    | 6 | D | O | U | B | L | E | 0 |
	+---------+---+---+---+---+---+---+---+---+
                   len                         pad

	and the second part, the actual definition of : (COLON), calls HEADER, (HEADER_COMMA) and appends the
	DOCOL codeword, so leaving:

								+-- Afterwards, DP points here.
								|
								V
	+---------+---+---+---+---+---+---+---+---+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 | DOCOL      |
	+---------+---+---+---+---+---+---+---+---+------------+
                   len                         pad  codeword

	HEADER, (HEADER_COMMA) is a FORTH word and the advantage of this split is that we can reuse it to
	create other types of words (not just ones which contain code, but words which contain variables,
	constants and other data).
*/

	defcode "HEADER,",7,,HEADER_COMMA

	// Get the name length and address.
	pop %ecx		// %ecx = length
	pop %ebx		// %ebx = address of name

	// Link pointer.
	movl var_DP,%edi	// %edi is the address of the header
	movl var_LATEST,%eax	// Get link pointer
	stosl			// and store it in the header.

	// Length byte and the word itself.
	mov %cl,%al		// Get the length.
	stosb			// Store the length/flags byte.
	push %esi
	mov %ebx,%esi		// %esi = word
	rep movsb		// Copy the word
	pop %esi
	lea 3(%edi),%edi		// Align to next 4 byte boundary.
	andl $~3,%edi

	// Update LATEST and DP.
	movl var_DP,%eax
	movl %eax,var_LATEST
	movl %edi,var_DP
	NEXT

/*
	Because I want to define : (COLON) in FORTH, not assembler, we need a few more FORTH words
	to use.

	The first is , (COMMA) which is a standard FORTH word which appends a 32 bit integer to the user
	memory pointed to by DP, and adds 4 to DP.  So the action of , (COMMA) is:

							previous value of DP
								 |
								 V
	+---------+---+---+---+---+---+---+---+---+-- - - - - --+------------+
	| LINK    | 6 | D | O | U | B | L | E | 0 |             |  <data>    |
	+---------+---+---+---+---+---+---+---+---+-- - - - - --+------------+
                   len                         pad		              ^
									      |
									new value of DP

	and <data> is whatever 32 bit integer was at the top of the stack.

	, (COMMA) is quite a fundamental operation when compiling.  It is used to append codewords
	to the current word that is being compiled.
*/

	defcode ",",1,,COMMA
	pop %eax		// Code pointer to store.
	call _COMMA
	NEXT
_COMMA:
	movl var_DP,%edi	// DP
	stosl			// Store it.
	movl %edi,var_DP	// Update DP (incremented)
	ret

/*
	Our definitions of : (COLON) and ; (SEMICOLON) will need to switch to and from compile mode.

	Immediate mode vs. compile mode is stored in the global variable STATE, and by updating this
	variable we can switch between the two modes.

	For various reasons which may become apparent later, FORTH defines two standard words called
	[ and ] (LBRAC and RBRAC) which switch between modes:

	Word	Assembler	Action		Effect
	[	LBRAC		STATE := 0	Switch to immediate mode.
	]	RBRAC		STATE := 1	Switch to compile mode.

	[ (LBRAC) is an IMMEDIATE word.  The reason is as follows: If we are in compile mode and the
	interpreter saw [ then it would compile it rather than running it.  We would never be able to
	switch back to immediate mode!  So we flag the word as IMMEDIATE so that even in compile mode
	the word runs immediately, switching us back to immediate mode.
*/

	defcode "[",1,F_IMMED,LBRAC
	xor %eax,%eax
	movl %eax,var_STATE	// Set STATE to 0.
	NEXT

	defcode "]",1,,RBRAC
	movl $1,var_STATE	// Set STATE to 1.
	NEXT

/*
	Now we can define : (COLON) using HEADER, (HEADER_COMMA).  It just calls HEADER, (HEADER_COMMA),
	appends DOCOL (the codeword), sets the word HIDDEN and goes into compile mode.
*/

	defword ":",1,,COLON
	.int WORD		// Get the name of the new word
	.int HEADER_COMMA	// Create the dictionary entry / header
	.int LIT, DOCOL, COMMA	// Append DOCOL  (the codeword).
	.int LATEST, FETCH, HIDDEN // Make the word hidden (see below for definition).
	.int RBRAC		// Go into compile mode.
	.int EXIT		// Return from the function.

/*
	; (SEMICOLON) is also elegantly simple.  Notice the F_IMMED flag.
*/

	defword ";",1,F_IMMED,SEMICOLON
	.int LIT, EXIT, COMMA	// Append EXIT (so the word will return).
	.int LATEST, FETCH, HIDDEN // Toggle hidden flag -- unhide the word (see below for definition).
	.int LBRAC		// Go back to IMMEDIATE mode.
	.int EXIT		// Return from the function.

/*
	EXTENDING THE COMPILER ----------------------------------------------------------------------

	Words flagged with IMMEDIATE (F_IMMED) aren't just for the FORTH compiler to use.  You can define
	your own IMMEDIATE words too, and this is a crucial aspect when extending basic FORTH, because
	it allows you in effect to extend the compiler itself.  Does gcc let you do that?

	Standard FORTH words like IF, WHILE, ." and so on are all written as extensions to the basic
	compiler, and are all IMMEDIATE words.

	The IMMEDIATE word toggles the F_IMMED (IMMEDIATE flag) on the most recently defined word,
	or on the current word if you call it in the middle of a definition.

	Typical usage is:

	: MYIMMEDWORD IMMEDIATE
		...definition...
	;

	but some FORTH programmers write this instead:

	: MYIMMEDWORD
		...definition...
	; IMMEDIATE

	The two usages are equivalent, to a first approximation.
*/

	defcode "IMMEDIATE",9,F_IMMED,IMMEDIATE
	movl var_LATEST,%edi	// LATEST word.
	addl $4,%edi		// Point to name/flags byte.
	xorb $F_IMMED,(%edi)	// Toggle the IMMED bit.
	NEXT

/*
	'addr HIDDEN' toggles the hidden flag (F_HIDDEN) of the word defined at addr.  To hide the
	most recently defined word (used above in : and ; definitions) you would do:

		LATEST @ HIDDEN

	'HIDE word' toggles the flag on a named 'word'.

	Setting this flag stops the word from being found by (FIND), and so can be used to make 'private'
	words.  For example, to break up a large word into smaller parts you might do:

		: SUB1 ... subword ... ;
		: SUB2 ... subword ... ;
		: SUB3 ... subword ... ;
		: MAIN ... defined in terms of SUB1, SUB2, SUB3 ... ;
		HIDE SUB1
		HIDE SUB2
		HIDE SUB3

	After this, only MAIN is 'exported' or seen by the rest of the program.
*/

	defcode "HIDDEN",6,,HIDDEN
	pop %edi		// Dictionary entry.
	addl $4,%edi		// Point to name/flags byte.
	xorb $F_HIDDEN,(%edi)	// Toggle the HIDDEN bit.
	NEXT

	defword "HIDE",4,,HIDE
	.int WORD		// Get the word (after HIDE).
	.int PAREN_FIND		// Look up in the dictionary.
	.int HIDDEN		// Set F_HIDDEN flag.
	.int EXIT		// Return.

/*
	['] (BRACKET_TICK) is a standard FORTH word which returns the codeword pointer of the next word.

	The common usage is:

	['] FOO ,

	which appends the codeword of FOO to the current word we are defining (this only works in compiled code).

	You tend to use ['] in IMMEDIATE words.  For example an alternate (and rather useless) way to define
	a literal 2 might be:

	: LIT2 IMMEDIATE
		['] LIT ,		\ Appends LIT to the currently-being-defined word
		2 ,		\ Appends the number 2 to the currently-being-defined word
	;

	So you could do:

	: DOUBLE LIT2 * ;

	(If you don't understand how LIT2 works, then you should review the material about compiling words
	and immediate mode).

	This definition of ['] uses a cheat which I copied from buzzard92.  As a result it only works in
	compiled code.  It is possible to write a version of ['] based on WORD, (FIND), >CFA which works in
	immediate mode too.

	This definition of ['] uses a cheat which I copied from buzzard92.  As a result it only works in
	compilied and when the word after it is not an immediate word. It is possible to write a version
	of ['] which works on immediate word, or to write another version based on WORD, (FIND), >CFA
	which works in immediate mode too.
*/
	defcode "[']",3,,BRACKET_TICK
	lodsl			// Get the address of the next word and skip it.
	pushl %eax		// Push it on the stack.
	NEXT

/*
	BRANCHING ----------------------------------------------------------------------

	It turns out that all you need in order to define looping constructs, IF-statements, etc.
	are two primitives.

	BRANCH is an unconditional branch. 0BRANCH is a conditional branch (it only branches if the
	top of stack is zero).

	The diagram below shows how BRANCH works in some imaginary compiled word.  When BRANCH executes,
	%esi starts by pointing to the offset field (compare to LIT above):

	+---------------------+-------+---- - - ---+------------+------------+---- - - - ----+------------+
	| (Dictionary header) | DOCOL |            | BRANCH     | offset     | (skipped)     | word       |
	+---------------------+-------+---- - - ---+------------+-----|------+---- - - - ----+------------+
								   ^  |			      ^
								   |  |			      |
								   |  +-----------------------+
								  %esi added to offset

	The offset is added to %esi to make the new %esi, and the result is that when NEXT runs, execution
	continues at the branch target.  Negative offsets work as expected.

	0BRANCH is the same except the branch happens conditionally.

	Now standard FORTH words such as IF, THEN, ELSE, WHILE, REPEAT, etc. can be implemented entirely
	in FORTH.  They are IMMEDIATE words which append various combinations of BRANCH or 0BRANCH
	into the word currently being compiled.

	As an example, code written like this:

		condition-code IF true-part THEN rest-code

	compiles to:

		condition-code 0BRANCH OFFSET true-part rest-code
					  |		^
					  |		|
					  +-------------+
*/

	defcode "BRANCH",6,,BRANCH
	add (%esi),%esi		// add the offset to the instruction pointer
	NEXT

	defcode "0BRANCH",7,,ZBRANCH
	pop %eax
	test %eax,%eax		// top of stack is zero?
	jz code_BRANCH		// if so, jump back to the branch function above
	lodsl			// otherwise we need to skip the offset
	NEXT

/*
	LITERAL STRINGS ----------------------------------------------------------------------

	LITSTRING is a primitive used to implement the ." and S" operators (which are written in
	FORTH).  See the definition of those operators later.

	TELL just prints a string.  It's more efficient to define this in assembly because we
	can make it a single Linux syscall.
*/

	defcode "LITSTRING",9,,LITSTRING
	lodsl			// get the length of the string
	push %esi		// push the address of the start of the string
	push %eax		// push it on the stack
	addl %eax,%esi		// skip past the string
 	addl $3,%esi		// but round up to next 4 byte boundary
	andl $~3,%esi
	NEXT

	defcode "TELL",4,,TELL
	mov $1,%ebx		// 1st param: stdout
	pop %edx		// 3rd param: length of string
	pop %ecx		// 2nd param: address of string
	mov $__NR_write,%eax	// write syscall
	int $0x80
	NEXT

/*
	COMBINING DATA AND BEHAVIOR --------------------------------------------------------

	A FORTH word with codeword DOCOL defines the word's behavior with other FORTH words.
	On the other hand, a built-in variable's behavior is simply push the pointer to its
	data onto the stack.

	One will wonder how can a FORTH word which owns complicated data specify its behavior on
	these data using other FORTH words. The magic word DODOES serves this purpose. 

	The diagram below shows how DODOES works.  When DODOES executes, it pushes the pointer to
	its data onto the stack and execute the behavior words pointed to by the behavior pointer.

	+---------------------+--------+---------+------+----------------+
	| (Dictionary header) | DODOES |         | data | behavior words |
	+---------------------+--------+---------+------+----------------+
			     behavior pointer |		  ^
					      |		  |
					      +-----------+

	When the behavior pointer is zero, there is no behavior words, DODOES simply pushes the pointer to
	its data onto the stack.

	+---------------------+--------+--------+------+
	| (Dictionary header) | DODOES |   0    | data |
	+---------------------+--------+--------+------+

*/

	.text
	.align 4
DODOES: 
	cmpl $0,4(%eax)		// Is offset zero ?
	jz 1f
	lea -4(%ebp),%ebp
	mov %esi,(%ebp)
	mov 4(%eax),%esi	// Get pointer to behavior words
1:	lea 8(%eax),%eax
	push %eax		// Push the pointer to its data
	NEXT

	defconst "DODOES",6,,__DODOES,DODOES

/*
	QUIT AND INTERPRET ----------------------------------------------------------------------

	QUIT is the first FORTH function called, almost immediately after the FORTH system "boots".
	As explained before, QUIT doesn't "quit" anything.  It does some initialisation (in particular
	it clears the return stack) and it calls INTERPRET in a loop to interpret commands.  The
	reason it is called QUIT is because you can call it from your own FORTH words in order to
	"quit" your program and start again at the user prompt.

	INTERPRET is the FORTH interpreter ("toploop", "toplevel" or "REPL" might be a more accurate
	description -- see: http://en.wikipedia.org/wiki/REPL).
*/

	// QUIT must not return (ie. must not call EXIT).
	defword "QUIT",4,,QUIT
	.int RZ,RSPSTORE	// R0 RSP!, clear the return stack
	.int INTERPRET		// interpret the next word
	.int BRANCH,-8		// and loop (indefinitely)

/*
	This interpreter is pretty simple, but remember that in FORTH you can always override
	it later with a more powerful one!
 */
	defcode "INTERPRET",9,,INTERPRET
	call _WORD		// Returns %ecx = length, %edi = pointer to word.

	// Is it in the dictionary?
	xor %eax,%eax
	movl %eax,interpret_is_lit // Not a literal number (not yet anyway ...)
	call _FIND		// Returns %eax = pointer to header or 0 if not found.
	test %eax,%eax		// Found?
	jz 1f

	// In the dictionary.  Is it an IMMEDIATE codeword?
	mov %eax,%edi		// %edi = dictionary entry
	movb 4(%edi),%al	// Get name+flags.
	push %ax		// Just save it for now.
	call _TCFA		// Convert dictionary entry (in %edi) to codeword pointer.
	pop %ax
	andb $F_IMMED,%al	// Is IMMED flag set?
	mov %edi,%eax
	jnz 4f			// If IMMED, jump straight to executing.

	jmp 2f

1:	// Not in the dictionary (not a word) so assume it's a literal number.
	incl interpret_is_lit
	call _NUMBER		// Returns the parsed number in %eax, %ecx > 0 if error
	test %ecx,%ecx
	jnz 6f
	mov %eax,%ebx
	mov $LIT,%eax		// The word is LIT

2:	// Are we compiling or executing?
	movl var_STATE,%edx
	test %edx,%edx
	jz 4f			// Jump if executing.

	// Compiling - just append the word to the current dictionary definition.
	call _COMMA
	mov interpret_is_lit,%ecx // Was it a literal?
	test %ecx,%ecx
	jz 3f
	mov %ebx,%eax		// Yes, so LIT is followed by a number.
	call _COMMA
3:	NEXT

4:	// Executing - run it!
	mov interpret_is_lit,%ecx // Literal?
	test %ecx,%ecx		// Literal?
	jnz 5f

	// Not a literal, execute it now.  This never returns, but the codeword will
	// eventually call NEXT which will reenter the loop in QUIT.
	jmp *(%eax)

5:	// Executing a literal, which means push it on the stack.
	push %ebx
	NEXT

6:	// Parse error (not a known word or a number in the current BASE).
	// Print an error message followed by up to 40 characters of context.
	mov $2,%ebx		// 1st param: stderr
	mov $errmsg,%ecx	// 2nd param: error message
	mov $errmsgend-errmsg,%edx // 3rd param: length of string
	mov $__NR_write,%eax	// write syscall
	int $0x80

	mov (currkey),%ecx	// the error occurred just before currkey position
	mov %ecx,%edx
	sub $buffer,%edx	// %edx = currkey - buffer (length in buffer before currkey)
	cmp $40,%edx		// if > 40, then print only 40 characters
	jle 7f
	mov $40,%edx
7:	sub %edx,%ecx		// %ecx = start of area to print, %edx = length
	mov $__NR_write,%eax	// write syscall
	int $0x80

	mov $errmsgnl,%ecx	// newline
	mov $1,%edx
	mov $__NR_write,%eax	// write syscall
	int $0x80

	NEXT

	.section .rodata
errmsg: .ascii "PARSE ERROR: "
errmsgend:
errmsgnl: .ascii "\n"

	.data			// NB: easier to fit in the .data section
	.align 4
interpret_is_lit:
	.int 0			// Flag used to record if reading a literal

/*
	ANS Forth Core Words  ----------------------------------------------------------------------
	Some lower level ANS Forth CORE words are not presented in the orignal jonesforth. They are
	included here without explaination.
*/

/* Macros to deal with the return stack. */
	.macro PUSH2RSP reg1,reg2
	lea -8(%ebp),%ebp	// push reg1 and reg2 on to return stack
	movl \reg1,4(%ebp)
	movl \reg2,(%ebp)
	.endm

	.macro POP2RSP reg1, reg2
	mov (%ebp),\reg2	// pop top of return stack to reg1 and reg2
	mov 4(%ebp), \reg1
	lea 8(%ebp),%ebp
	.endm

	defcode "2*",2,,TWOMUL
	shll $1, (%esp)
	NEXT

	defcode "2/",2,,TWODIV
	sarl $1, (%esp)
	NEXT

	defcode "(DO)", 4,,PAREN_DO
	pop %eax		// pop parameter stack into %eax and %edx
	pop %edx
	PUSH2RSP %edx, %eax	// push it on to the return stack
	NEXT

	defcode "(LOOP)", 6,,PAREN_LOOP
	POP2RSP %edx, %eax
	inc %eax
	cmp %edx, %eax
	je 1f
	PUSH2RSP %edx, %eax
	add (%esi),%esi		// add the offset to the instruction pointer
	NEXT
1:
	lodsl
	NEXT

	defcode "(+LOOP)", 7,,PAREN_PLUS_LOOP
	POP2RSP %edx, %eax	// index in %eax, limit in %edx
	sub %edx, %eax		// index-limit in %eax
	pop %ebx		// n in %ebx
	add %eax, %ebx		// index-limit+n in %ebx
	xor %ebx, %eax		// (index-limit) and (index-limit+n) have different sign?
	js 1f
	add %edx, %ebx		// index+n in %ebx
	PUSH2RSP %edx, %ebx
	add (%esi),%esi		// add the offset to the instruction pointer
	NEXT
1:
	lodsl
	NEXT

	defcode "UNLOOP", 6,,UNLOOP
	lea 8(%ebp),%ebp
	NEXT

	defcode "I", 1,,I
	push (%ebp)
	NEXT

	defcode "J", 1,,J
	push 8(%ebp)
	NEXT

/*
	ODDS AND ENDS ----------------------------------------------------------------------

	CHAR puts the ASCII code of the first character of the following word on the stack.  For example
	CHAR A puts 65 on the stack.

	EXECUTE is used to run execution tokens.  See the discussion of execution tokens in the
	FORTH code for more details.

	SYSCALL0, SYSCALL1, SYSCALL2, SYSCALL3 make a standard Linux system call.  (See <asm/unistd.h>
	for a list of system call numbers).  As their name suggests these forms take between 0 and 3
	syscall parameters, plus the system call number.

	In this FORTH, SYSCALL0 must be the last word in the built-in (assembler) dictionary because we
	initialise the LATEST variable to point to it.  This means that if you want to extend the assembler
	part, you must put new words before SYSCALL0, or else change how LATEST is initialised.
*/

	defcode "CHAR",4,,CHAR
	call _WORD		// Returns %ecx = length, %edi = pointer to word.
	xor %eax,%eax
	movb (%edi),%al		// Get the first character of the word.
	push %eax		// Push it onto the stack.
	NEXT

	defcode "EXECUTE",7,,EXECUTE
	pop %eax		// Get xt into %eax
	jmp *(%eax)		// and jump to it.
				// After xt runs its NEXT will continue executing the current word.

	defcode "SYSCALL3",8,,SYSCALL3
	pop %eax		// System call number (see <asm/unistd.h>)
	pop %ebx		// First parameter.
	pop %ecx		// Second parameter
	pop %edx		// Third parameter
	int $0x80
	push %eax		// Result (negative for -errno)
	NEXT

	defcode "SYSCALL2",8,,SYSCALL2
	pop %eax		// System call number (see <asm/unistd.h>)
	pop %ebx		// First parameter.
	pop %ecx		// Second parameter
	int $0x80
	push %eax		// Result (negative for -errno)
	NEXT

	defcode "SYSCALL1",8,,SYSCALL1
	pop %eax		// System call number (see <asm/unistd.h>)
	pop %ebx		// First parameter.
	int $0x80
	push %eax		// Result (negative for -errno)
	NEXT

	defcode "SYSCALL0",8,,SYSCALL0
	pop %eax		// System call number (see <asm/unistd.h>)
	int $0x80
	push %eax		// Result (negative for -errno)
	NEXT

/*
	DATA SEGMENT ----------------------------------------------------------------------

	Here we set up the Linux data segment, used for user definitions and variously known as just
	the 'data segment', 'user memory' or 'user definitions area'.  It is an area of memory which
	grows upwards and stores both newly-defined FORTH words and global variables of various
	sorts.

	It is completely analogous to the C heap, except there is no generalised 'malloc' and 'free'
	(but as with everything in FORTH, writing such functions would just be a Simple Matter
	Of Programming).  Instead in normal use the data segment just grows upwards as new FORTH
	words are defined/appended to it.

	There are various "features" of the GNU toolchain which make setting up the data segment
	more complicated than it really needs to be.  One is the GNU linker which inserts a random
	"build ID" segment.  Another is Address Space Randomization which means we can't tell
	where the kernel will choose to place the data segment (or the stack for that matter).

	Therefore writing this set_up_data_segment assembler routine is a little more complicated
	than it really needs to be.  We ask the Linux kernel where it thinks the data segment starts
	using the brk(2) system call, then ask it to reserve some initial space (also using brk(2)).

	You don't need to worry about this code.
*/
	.text
	.set INITIAL_DATA_SEGMENT_SIZE,65536
set_up_data_segment:
	xor %ebx,%ebx		// Call brk(0)
	movl $__NR_brk,%eax
	int $0x80
	movl %eax,var_DP	// Initialise DP to point at beginning of data segment.
	addl $INITIAL_DATA_SEGMENT_SIZE,%eax	// Reserve nn bytes of memory for initial data segment.
	movl %eax,%ebx		// Call brk(DP+INITIAL_DATA_SEGMENT_SIZE)
	movl $__NR_brk,%eax
	int $0x80
	ret

/*
	We allocate static buffers for the return static and input buffer (used when
	reading in files and text that the user types in).
*/
	.set RETURN_STACK_SIZE,8192
	.set BUFFER_SIZE,4096

	.bss
/* FORTH return stack. */
	.align 4096
return_stack:
	.space RETURN_STACK_SIZE
return_stack_top:		// Initial top of return stack.

/* This is used as a temporary input buffer when reading from files or the terminal. */
	.align 4096
buffer:
	.space BUFFER_SIZE

/*
	START OF FORTH CODE ----------------------------------------------------------------------

	We've now reached the stage where the FORTH system is running and self-hosting.  All further
	words can be written as FORTH itself, including words like IF, THEN, .", etc which in most
	languages would be considered rather fundamental.

	I used to append this here in the assembly file, but I got sick of fighting against gas's
	crack-smoking (lack of) multiline string syntax.  So now that is in a separate file called
	jonesforth.f

	If you don't already have that file, download it from http://annexia.org/forth in order
	to continue the tutorial.
*/

/* END OF jonesforth.S */